Bower and Wilkins Px8 Wireless Headphones User Manual

Bower and Wilkins Px8 Wireless Headphones User Manual

Welcome to Bowers & Wilkins and Your Px8 Headphones

Thank you for choosing Bowers & Wilkins. When John Bowers first established our company, he did so in the belief that imaginative design, innovative engineering, and advanced technology were keys that could unlock the enjoyment of audio in the home. His belief is one that we continue to share and inspires every product we design, tailored for new audio experiences outside of the home.

The Bowers & Wilkins Px8 are high-performance over-ear headphones designed to deliver the highest quality mobile personal audio experience combined with the convenience of wireless operation and the serenity of noise-cancellation. This manual will tell you everything you need to know to get the most from your Px8 headphones. Your Px8 can play music streamed wirelessly from your mobile phone, tablet, or computer via Bluetooth, or conventionally connected by a jack cable to a suitable analog headphone output.

Continued

Px8 can also play audio via a USB connection from a computer and can be used for wireless telephony. Px8 Real World Listening features include our latest innovations in Active Noise Cancellation, Ambient Pass-Through, and enhanced Wear Sensing technologies. Our latest generation noise cancellation feature delivers an uncompromised listening experience. Ambient Pass-Through enables external sounds, such as conversations or safety announcements, to be heard clearly without any need to remove the headphones. The Wear Sensing feature enables Px8 to respond naturally, pausing and resuming the music simply by lifting either earpiece on or off your ear.

Getting to Know Your Px8

We recommend installing the Bowers & Wilkins Music app on your iOS or Android device.

Px8 Carton Contents

• Px8 over-ear wireless headphones
• Storage case
• USB-C to USB-C charging cable
• USB-C to 3.5 mm audio cable
• Document pack

Switching On
The power switch is located on the right earpiece. Slide the power switch up to the middle position. An audible cue will be played and the LED indicator will light up.

Switching Off
Slide the power switch to the bottom position. An audible cue will be played and the headphones will power down when the LED indicator is no longer lit.

Bluetooth Pairing
Slide the power switch to the upper position and hold for 5 seconds to enter Bluetooth pairing mode. Refer to section 6 for further information on pairing your headphones to a Bluetooth source.

Headphone Controls

Diagram 2 illustrates the headphone controls. The buttons on the right earpiece are used for media playback and telephony.

Status Indicator
The status LED indicator is located on the right earpiece, The table below explains the illumination states:

Illumination    Operational state

• White  Battery charge > 30%
• Amber  Battery charges between 30% and 10%
• Red            Battery charge < 10%
• The red flashing       Battery charge insufficient for headphone operation
• Blue flashing           Pairing mode enabled
• Blue (2 sec solid)    Pairing successful
• Blue flashing (calls)       Incoming call
• Green flashing   Rapid charging
• Green solid      Battery charge full, trickle charging

Intelligent Features

Active Noise Cancellation
Noise cancellation is a series of advanced technologies that aid in removing undesired noise from the surrounding environment. The Px8 headphones use built-in microphones to pick up and cancel out ambient sound for a more comfortable listening experience.

Note:
Noise cancellation requires a good seal between the headphones and your head for optimal performance.

Ambient Pass-Through
Px8 also features an ambient “Pass-Through” mode, which allows in some external sound from the surrounding environment, allowing safety announcements or conversations to be heard without taking the headphones off. By default, the Quick Action button on the left earpiece will cycle through the following modes, but the button can be customized from the Bowers & Wilkins Music app. See Diagram 2 for button location.

• Noise Cancelling On
• Pass-Through On
• Noise Cancelling and Pass-Through Off

Voice Assistance

Your connected device’s voice assistant can be assigned to the Quick Action button on the left earpiece from the Bowers & Wilkins Music app. See Diagram 2 for button locations and section 8.2 on using the Bowers & Wilkins Music app.

Power Saving
Px8 incorporates our latest enhanced wear detection sensors in both earpieces (see Diagram 3), enabling intelligent battery conservation by pausing media playback and entering low-power standby mode when removed from the head. When worn again, Px8 automatically wakes and connects to the last connected Bluetooth device.

Playback Control
During media playback, Px8 will automatically pause when either earpiece is lifted from the ear. If playback has been paused, placing the earpiece back on the ear will resume playback. The standby timer and wear sensor features can be adjusted from the Bowers & Wilkins Music app.

Note:
Take care when wearing your headphones; hair or accessories trapped between your ears and the earpieces, or wearing glasses that distort the profile of your ears, may interfere with the performance of the wear sensors.

Battery Charging and Power Saving

Your Px8 comes with the battery partially charged and may be used immediately. For best practice, we recommend you fully charge the headphones before first use. Please allow up to 2 hours to fully charge. The headphones can be used while charging.

To charge:

1. Use the supplied USB-C cable and connect one end to a wall charger or powered computer port.
2. Connect the other end of the cable to the USB-C socket on the headphone’s right earpiece.

Note:
During charging, the headphone indicator will flash green. When fully charged, the indicator will remain illuminated. See section 2.3 for status indicator details.

Wearing Your Headphones
Wearing your headphones correctly will help ensure the best possible experience. See Diagram 5.

1. Identify the left and right earpieces by finding the identification legends located on the interior of each earpiece.
2. Wear the headphones accordingly with the headband adjusted so that they rest comfortably on your head.

Note:
Wearing glasses that distort the profile of your ears may interfere with headphone performance. Similarly, hair trapped between your ears and the headphone earpieces may interfere with the wear sensor performance.

Auxiliary Connection

In addition to Bluetooth, your Px8 can also connect to audio sources using the supplied 3.5 mm audio or USB cables.

Connecting with the 3.5 mm Audio Cable
The 3.5 mm audio cable enables your Px8 to be used with a device supporting an analog output, such as a conventional headphone socket on airplanes, smartphones, or a traditional hi-fi system.

1. Insert the supplied USB-C to 3.5 mm audio cable into the headphone’s USB-C socket on the right earpiece.
2. Insert the other end into the appropriate socket on your device.
3. Your Px8 will automatically disconnect from any Bluetooth devices.

Note:
Your headphones must have sufficient charge and be switched on to play audio from an analog source device. The volume and play/ pause buttons will not function when you are using the 3.5 mm interface.

Connecting with the USB Cable
The USB connection enables your Px8 to function as a USB sound output device when connected to a capable computer.

1. . Insert one end of the supplied USB-C to USB-C cable into the Px8 USB-C socket on the right earpiece.
2. Insert the other end into the appropriate socket on your computer.
3. Px8 will automatically disconnect from any Bluetooth devices.
4. Find and select your headphones from the computer’s audio output control panel.

Note:
The headphone battery will also charge when connected to a capable USB port.

Bowers & Wilkins Music App

The Bowers & Wilkins Music app is available for free on iOS and Android devices and provides extended setup and adjustments to features such as Active Noise Cancellation, Ambient Pass-Through, and EQ settings. The app also provides further functions such as device naming, connection management, and headphone software updates.

Controlling Your Headphones
Commonly used features of your headphones are accessible directly on the app homepage:

• Battery status
• Environmental controls (Noise Cancellation, Pass-Through)
• Device connections (refer to the C

Environmental Controls
Set the desired environmental control from the following options:

• Noise Cancelling On
• Pass-Through On
• Noise Cancelling and Pass-Through Off

Connections

The two most recently connected Bluetooth devices are shown in the Connections shortcut buttons. The buttons will appear grey if not currently connected. Tap the buttons to attempt reconnection. If only one device is shown, tap ADD DEVICE to place the headphones into Bluetooth pairing mode to pair them with a new device. Tap the CONNECTIONS heading to view more detailed connection settings, including previously connected devices (Px8 will remember up to eight devices).

Once on the Connections page, swipe a device left to delete a device from the list. Swipe a device right to make it the preferred device to connect to when the headphones are switched on. Toggle Auto-connect to last device to prompt the headphones to connect to the previously connected device when they are switched on. Tap PAIR A NEW DEVICE to place the headphones into Bluetooth pairing mode and pair them with a new device.

Quick Action Button
The left earpiece of your headphones features a button that provides quick access to commonly used functions. Customize the function of this button from the app.

• Environmental Controls – Each press of the Quick Action Button cycles through:
• Noise Cancelling On
• Pass-Through On
• Noise Cancelling and Pass-Through Off
• Voice Assistant – Press the Quick Action
• Button to activate your device’s voice assistant.

Device Management

Toggle Auto Standby on to place the headphones into a power-saving state after 15 minutes of inactivity. Toggle the Wear sensor on to enable intelligent playback control; lift an earpiece or remove your headphones to pause playback. Place them back on your ears to resume playback.

Rename product
Tap Rename product to choose a new Bluetooth name for your headphones. Note that devices already paired with the headphones may still reference the previous name.

Headphone Software Updates
Bowers & Wilkins will occasionally make available software updates that refine and optimize the performance of your headphones or add new features. The Bowers & Wilkins Music app will notify you when a software update is available. Tap on the notification and then follow the in-app instructions.

Power Cycle
To reboot your Px8, remove the headphones from your head and remove any cables from the headphones. Simultaneously hold the Volume + and Volume – buttons for 10 seconds until the indicator LED extinguishes. Release the buttons when the indicator lights up again. Rebooting your headphones will not reset their internal settings or clear the paired device history.

Cleaning Your Headphones

It is advised that you clean your headphones regularly. Your Px8 can be cleaned with a soft, damp microfiber cloth, gently wipe, or dab clean. The fabric on Px8 has been specially coated with moisture and stain repellent. If dirt, stain, or fiber residue accumulates on the fabric surface, please clean as instructed above.

• Do NOT aggressively rub or use an abrasive tool to clean, especially the fabric or leather.
• Do NOT use paper towels, napkins, or tissue as they will leave residue.
• Do NOT use cleaning detergents, soapy water, polish, or chemical cleaners.
• Ensure that no moisture gets inside the earpieces, buttons, and interface ports.

Specifications

• Wearing Style Bluetooth Wireless Over-Ear Headphones
• Technical Features Active Noise Cancellation
  Ambient Pass-Through
  Wear-Detection Sensor
  Bluetooth® audio – Bluetooth 5.2 with aptX™ Adaptive
  USB-C charging & audio interface
• Bluetooth Codecs aptX™ Adaptive
  aptX™ HD
  aptX™
  AAC
  SBC
• Bluetooth Profiles A2DP
  AVRCP
  HFP
  HSP
  BLE GATT (Generic Attribute Profile)
• Drive Units 2 x ø 40 mm dynamic full-range custom carbon driver
• Microphones 4 x mics for ANC
  2 x mics for telephony
• Input Impedance 33 Ω
• Distortion (THD) <0.1% (1 kHz/10 mW)
• Battery Type Rechargeable Lithium Ion
• Battery Life & Charging 30 hrs Bluetooth with ANC, 7 hrs with 15 min charge, 2 hrs for full charge
• Inputs Bluetooth, USB-C audio
• In Box Accessories 1.2 m USB-C to 3.5 mm stereo jack audio cable
• 1.2 m USB-C to USB-C cable
  Carrying case
• Weight 320 grams without case

Care & Maintenance 
Storing Your Headphones Taking care of your Px8 will ensure they continue to deliver the best performance and experience. When you are not using your headphones, stow them in the included storage pouch. It is recommended the headphones are first powered off.

1. Retract the headband on each side so they are in the smallest position.
2. With the buttons facing you, rotate the earpieces inwards so they lay flat.
3. Place the headphones into the storage case.

Support

Should you require further help or advice regarding your Px8, please visit the Bowers & Wilkins support site: www.bowerswilkins.com/support.

Environmental Information
This product complies with international directives, including but not limited to the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment, the Registration, Evaluation, Authorisation, and restriction of Chemicals (REACH), and the disposal of Waste Electrical and Electronic Equipment (WEEE). Consult your local waste disposal authority for guidance on how properly to recycle or dispose of this product.

REFERENCE LINK

https://www.bowerswilkins.com/en-eu/product/headphones/px8

DOWNLOAD PDF

Bower and Wilkins Px8 Wireless Headphones User Manual