PYLE PDA8BUWM Compact Amplifier User Manual

PYLE PDA8BUWM Compact Amplifier User Manual

WARNING!

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OF THIS UNIT. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN.

ALERT:

• The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of “dangerous” voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of Electric shock to humans.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this manual.

SAFETY INSTRUCTIONS:

1. Read these instructions thoroughly before using this item.
2. Keep these instructions for future reference.
3. Heed all warnings.
4. Follow all instructions.
5. WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store or operate this product near any liquids.
6. Clean only with a dry cloth.
7. Do not store or operate this product near any heat sources such as radiators, heat registers, stoves, or other apparatuses (including amplifiers) that produce heat.
8. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a round grounding prong.
9. Protect the all wires connected to this unit from being walked on or pinched, particularly plugs and the point where they exit from the unit. When removing the cord from the power outlet, remove it by holding the plug not by pulling the cord.
10. Unplug the unit during lighting storms or when unused for long periods of time.
11. When wiring this unit and all other equipment used in connection to this unit make sure that all of your equipment is turned OFF.
12. Once installation and wiring is complete power on all your equipment with the volume and level controls turned DOWN. Once all the equipment is ON slowly raise the volume or level controls to their proper positions.

INTRODUCTION

To get the most from your PDA8BUWM, it is recommended that you review all of the information provided in the instruction manual before operating the equipment.

PDA8BUWM FRONT & BACK PANEL

1. POWER SWITCH: Switch to power the unit on and off.
2. CONTROL BUTTONS

A.MODE BUTTON: Press this button to select one from play mode with USB/SD mode, FM mode and Wireless BT mode, automatically set in USB/SD mode after turning on the unit, automatically play mp3 files after inserting a USB flash driver or SD card.

STEPS FOR CONNECTING WITH WIRELESS BT DEVICE

1. Press MODE button to choose Wireless BT mode, displays BLUETOOTH on the screen .
2. Set your Wireless BT device to “Discoverable.” This will allow your device to discover the PYLEUSA or BT.
3. Select the PYLEUSA or BT Bluetooth name and wait for the device to pair.
4. The PDA8BUWM will emit a noise confirming that the devices have successfully paired and the screen will display “BLUETOOTH CONNECTED”
5. Once paired you can play music from your Wireless BT device. You can also use the control buttons on the unit to select the tracks from your Bluetooth device.

B.PLAY/PAUSE BUTTON: Each press of the PLAY/PAUSE BUTTON causes the operation to change from play t o pause or from pause to play in the USB/SD mode or BLUETOOTH mode. Presses the PLAY/PAUSE BUTTON one time to auto scan all frequencies, the unit will auto store the channel.

C.STOP BUTTON: Press this button to stop play in the USB/SD mode.
D.REPEAT/FOLDER BUTTON: This button allows you to set one of repeat mode with ALL, NORMAL, SINGLE, RANDOM, FOLDER and BROWSE in the USB/SD mode.

E.PREV BUTTON: Use this button to select previous track or folder, depending on these two different modes as below.

• In USB/SD mode: use to select previous track or folder, hold this button to fast back play.
• In FM mode: use to select pervious channel.
• In BLUETOOTH mode: use to select previous track, hold this button to decrease the volume

F.NEXT BUTTON: Use this button to select next track or folder, depending on these 3 different modes as below.

• In USB/SD mode: use to select next track or folder, hold this button to fast forward play.
• In FM mode: use to select next channel.
• In BLUETOOTH mode: use to select previous track, hold this button to increase the volume.

LCD DISPLAY SCREEN

IMPORTANT INFORMATION:

1. REPEAT NAME AND MODE NAME
2. SOURCE NAME
3. TRACK NUMBER NAME
4. TRACK NAME
5. ELAPSED TIME
6. WIRELESS MICROPHONE ECHO KNOB
7. WIRELESS MICROPHONE VOLUME KNOB
8. MICROPHONE 1&2 ECHO KNOB:
   Turn this knob to adjust the microphone echo, the depth of the echo effect, and increase or decrease the level.
9. MICROPHONE 1&2 VOLUME KNOB:
   Turn this knob to adjust the volume of the microphone
10. BALANCE KNOB:
    To adjust the Left channel or Right channel input level.
11. SOURCE SWITCH:
    Turn this switch to choose the input source to play.
12. 1/8” TRS JACK:
    Connects to a MP3 player or Ipod with 1/8” TRS plug.
13. REMOTE RECEIVER WINDOW:
    To receive the remote control signal.
14. VIDEO INPUT:
    The video input terminals can be connected such as DVD video.
15. VIDEO OUTPUT:
    This video output terminal can be output one of video with EVD or DVD input video.
16. AUDIO INPUT:
    Connect the audio output RCA jacks of DVD/CD, to these RCA jacks.
17.  LINE OUTPUT:
    Connect the audio input RCA jacks of other devices, to these RCA jacks
18. WIRELESS BT ANTENNA:
    Please pull the antenna out when using Wireless BT input
19. POWER SUPPLY:
    Connect to AC power socket.
20. WIRELESS ANTENNA:
    Please pull the antenna out when using wireless microphone.
21. RF INDICATOR LED:
    The indicator LED will light when the wireless microphone is activated.

REMOTE CONTROL

1. Press this button to turn on the MP3
2. In FM mode, press this two buttons to select previous or next channel.
3. Press these two buttons to select the previous or next track in USB or SD or Wireless BT mode
4. Volume up or down
5. Press the numbers to select the tracks directly. The unit takes 1-2 seconds to response in USB or SD mode.
6. Press this button to select the different repeat mode. Pressing this button for more than 3 seconds will enter into FOLDER searching
7. Press this button to select the playing mode, such as USB/SD/FM/WIRELESS BT
8. EQ function, if the mp3 with EQ
9. Play and pause function for MP3

UHF WIRELESS MICROPHONE

1. GRILLE: Protects the cartridge and helps reducing the breath sound and wind noise.
2. LCD: When the power is on, it will show the frequency data.
3. POWER SWITCH: Push this switch to turn on or off the wireless microphone.
4. BATTERY COVER: Rotate it to install the battery (5” AA battery, not included).

Features:

• Compact Home Theater Amplifier
• 2 Channel Amplifier Design
• FM Radio Stereo Receiver System
• Built-in BT for Wireless Music Streaming
• UHF Wireless Microphone System
• Unique ‘Track / Folder’ Music Search Control Knob
• USB Flash Drive & SD Memory Card Readers
• USB Doubles as Device Charge Port
• Front Panel Audio Control Center
• Digital LCD Display
• ID3 Digital Tag Readout Display for Track & Folder Name
• Connect & Stream Audio from External Devices
• Aux (3.5mm) Input
• (2) 1/4” Microphone Input Connector Jacks
• (2) Pairs of RCA (L/R) Audio Input Connectors
• (2) Pairs of Banana Plug Speaker Output Connectors
• (1) Pair of RCA (L/R) Audio Output Connectors
• RCA Video Input/output Connectors
• Treble Bass Master & Microphone Volume Adjustable
• ECHO and Volume Control for Wireless Microphone
• Repeat & Random’ Audio File Functions
• Dual Microphone Inputs
• Blue LCD Screen Showing Track and Folder Name

Bluetooth Connectivity

• Built-in BT for Wireless Music Streaming
• Compatible with All of Today’s Latest Wireless BT Devices (iPhone, Androids, Smartphones, iPad, Tablets, Laptops, etc.)
• Wireless BT Version: 2.1
• Wireless BT Network Name: ‘Pyle USA’ or ‘BT’
• Wireless Range: Up to 30’+ ft.
• 2.4G Wireless BT Antenna

What’s in the Box

• Stereo Amplifier/Microphone Receiver
• UHF Wireless Handheld Microphone
• Remote Control
• FM Antenna

Technical Specs

• Power Output: 200 Watt MAX (100 Watt RMS)
• Mic Receiving Sensitivity : 5dB UV
• Wireless Microphone Range: Up to 100’+ ft.
• Tone Control: +/- 10dB
• Frequency Response: 20-20KHz
• Frequency Adjustment: +/-2dB
• Signal to Noise Ratio: >85dB
• T.H.D.: <1.0%
• Remote Control Battery: 3V Lithium Cell (CR2025) Included
• Battery Operated Microphone, Requires (5) x ‘AA’ Batteries, Not Included
• Power Supply: 110/240V switchable
• Power Output: 25Wx2
• Dimensions (L x W x H): 11.0’’ x 9.8’’ x 3.5’’ -inches

Questions? Issues?

We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com

REFERENCE

http://manuals.pyleusa.com/PDF/PDA8BUWM_9ec37fc8-fdd0-4cb6-85ec-d36bb57c27a8.pdf

DOWNLOAD PDF

PDA8BUWM_9ec37fc8-fdd0-4cb6-85ec-d36bb57c27a8_compressed