FOR GAMERS. BY GA M ERS.’“
CONTENTS
- WHAT’SINSIDE 3
- WHAT’SNEEDED 4
- LET’S GETYOU COVERED 4
- TECHNICALSPECIFICATIONS 5
- GETTINGSTARTED 6
- CONFIGURING YOUR RAZERBASILISK ULTIMATE 11
- SAFETYAND MAINTENANCE 26
- LEGALESE 28
1. WHAT’S INSIDE
RAZER BASILISK ULTIMATE
p
C! !:I
- Leftmouse button Razer™ Focus+ 20,000 DPI Optical
- Rightmouse button Sensor
- Scrollwheel Profile indicator
- DPIstage up Profile button
- DPIstage down Power on/off switch
- Multi-functionpaddle Wireless USB dongle compartment
- Mousebutton 5 Wireless USB dongle
- Mousebutton 4 Charging Cable
- Ultraslickmouse feet Razer Chroma™ Mouse Charging Dock
- Scrollwheel resistance adjustment dial
0 Default DP! stages are as follows: 800, 1800, 4000, 9000, and 20000. The DP! stages can be customized using Razer Svnapse 3.
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
5. GETTING STARTED
CHARGING YOUR RAZER BASILISK ULTIMATE
Plug the charging cable from your computer’s USB port to your Basilisk Ultimate.
O This connection also acts as the wired mode for vour Razer device.
For best results, please fully charge your Razer Basilisk Ultimate before using it for the first time. A depleted battery will be fully charged in approximately 4 hours. If the Razer Basilisk Ultimate has not been used for an extended period, you may need to recharge it before use.
The Razer Basilisk Ultimate requires a USB connection that is able to supply sufficient power to charge the battery. The battery charging process of the Razer Basilisk Ultimate may be affected if connected to a non-powered USB hub or non-powered USB ports found on certain keyboards and other peripherals. When in doubt, it is preferable to connect the Razer Basilisk Ultimate directly to the USB port of your computer.
LOW POWER INDICATOR
The Razer Basilisk Ultimate ‘s scroll wheel will blink red twice in repeated intervals to indicate that the battery’s power is less than 5%. This lighting sequence will repeat until the battery is drained or the mouse is connected to the PC via the charging cable.
0 The indicator percentage can be customized using Razer software.
USING THE USB WIRELESS DONGLE
- Remove the compartment cover from your Razer Basilisk
- Remove the USB wireless dongle from your
- Reattachthecompartment cover onto your Razer Basilisk Ultimate and make sure it is securely
- Insertthe USB wireless dongle into your computer’s USB
- Switch on the Razer Basilisk
cg
(g
POWER OFF POWER ON
Your Razer Basilisk Ultimate is now ready for use in wireless mode.
USING THE CHARGING DOCK
- Plugthe charging cable from your computer’s USB port to the charging
- Insert the USB wireless dongle into your computer’s USB
You can use the charging dock to replenish your mouse’s battery and to extend the reach of your USB wireless dongle. You can also connect to Razer Synapse and place your Razer Basilisk Ultimate on the charging dock to view the mouse’s current battery status.
| Color | Battery Percentage | Effect |
|
Red |
<25% | Breathing
.. I’ |
|
Orange |
26%-50% | Breathing D ‘ “ |
|
Yellow |
51%-75% | Breathing D’ I |
|
Green |
76%-99% | Breathing D ‘•’ |
|
Green |
100% | Static D |
USING THE WIRELESS USB DONGLE ADAPTER
Use the USB dongle adapter to easily access and extend the reach of your USB dongle.
ADJUSTING THE SCROLL WHEEL RESISTANCE
Your Razer Basilisk Ultimate comes with a dial that allows you to customize the force needed to rotate the scroll wheel. Turn the scroll wheel resistance adjustment dial to increase or decrease the scroll wheel resistance accordingly.
+ +
Increase resistance Decrease resistance
MULTl-FUNCTION PADDLE
Your Razer Basilisk Ultimate has a multi-function paddle which by default, allows you to temporarily change the mouse’s sensitivity when held down. To customize the multi-function paddle to perform different tasks, you’ll need to install Razer Synapse 3. For a better fit, you can replace the multi-function paddle with other sizes sold exclusively on raze rca restore.razer.com .
6. CONFIGURING YOUR RAZER BASILISK ULTIMATE
Disclaimer: The features listed here require you to log into Razer Synapse 3. These features are also subject to change based on the current software version and your Operating System.
SYNAPSE TAB
The Synapse tab is your default tab when you first launch Razer Synapse 3. This tab allows you to navigate the Dashboard subtab.
Dashboard
The Dashboard subtab is an overview of your Razer Synapse 3 where you can access all your Razer devices, modules, and online services.
MOUSE TAB
The Mouse tab is the main tab for your Razer Basilisk Ultimate. From here, you can change your device’s settings such as button assignment, DPI sensitivity, and lighting. Changes made under this tab are automatically saved to your system and cloud storage however, you need to click the Save
button { II ) to open the storage slots for your Razer device’s on-board memory then drag and
drop the profiles you want to store.
Customize
The Customize subtab is for modifying your mouse’s button assignments.
Profile
Profile is a data storage for keeping all your Razer peripheral’s settings. By default, the profile name is based on your system’s name. To add, rename, duplicate, or delete a profile, simply press the Miscellaneous button { ••• ).
Stored Profiles
Your Razer Basilisk Ultimate can store up to 5 profiles from Razer Synapse 3, which you can use even on systems that do not have Razer Synapse 3 installed. Pressing the profile button will cycle through the different profiles, with the profile indicator’s color showing which profile is currently selected.
Designated color
Active Profile White 0
Profile 1 Red •
Profile 2 Green
Profile 3 Blue •
Profile 4 Cyan 0
Profile indicator Profile button
Mouse Use
This option enables you to switch the orientation of your primary and secondary mouse functions to accommodate left-handed or right-handed users.
Hvpershift
Hypershift mode is a secondary set of button assignments that is activated when the Hypershift key is held down. By default, the Hypershift key is assigned to the FN key of your Razer Synapse 3 supported keyboard however, you can also assign any mouse button as a Hypershift key.
Sidebar
Clicking the Sidebar button ( ) will reveal all current button assignments for your Razer Basilisk Ultimate.
Alternatively, you can skip to a specific button assignment by selecting it on the Customize tab.
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
Performance
The Performance subtab allows you to modify the sensitivity, acceleration, and polling rate.
Listed below are the performance options and their descriptions.
Sensitivitv
Sensitivity refers to the distance the cursor will travel based on how far the mouse moved. The higher the DPI, the farther the cursor will travel given the same distance of mouse movement.
Enable X-Y Sensitivity
By default, the X-axis (horizontal) and Y-axis (vertical) use the same sensitivity values. However, you may set different sensitivity values to each of the axes by selecting the Enable X-Y Sensitivity option.
Sensitivity Stages
A sensitivity stage is a preset sensitivity value. You can create up to 5 different sensitivity stages which you can cycle through using the sensitivity stage up/down buttons. You may use the Enable X-Y Sensitivity concurrently with this option.
Polling Rate
The higher the polling rate, the more often the computer receives information about the status of your mouse, thus increasing the mouse pointer’s reaction time. You can switch between 125Hz
{8ms}, 500Hz {2ms} and 1000Hz {1ms} by selecting your desired polling rate on the dropdown menu.
Mouse Properties
From here, you can access the Windows Mouse Properties where you modify operating system settings that can directly affect your Razer Basilisk Ultimate.
Lighting
The Lighting subtab enables you to modify your Razer device’s light settings.
Brightness
You can turn off your Razer device’s lighting by toggling the Brightness option or increase/decrease the luminance using the slider.
Switch Off Lighting
This is a power saving tool which allows you to disable your device’s lighting in response to your system’s display turning off and/or automatically power down when your Razer Basilisk Ultimate has been idle for a set amount of time.
Quick Effects
A number of quick effects can be selected and applied to your mouse’s lighting, as listed here:
IName
I Description IHow to set up
| @ | Audio Meter | The LEDs will light up according to the audio level with a default spectrum of colors | Select a Color Boost level |
| ® |
Breathing | The lighting fades in and out of the selected color(s) | Select up to 2 colors or randomize |
| @) |
Reactive | The LEDs will light up when you click any of the mouse buttons | Select the color and the length of time for the LED to remain lit |
| @) | Spectrum Cycling | The LEDs will cycle between 16.8 million colors indefinitely | No further customization required |
| @ |
Static | The LEDs will remain lit in the selected color |
Select a color |
If you have other supported Razer Chroma-enabled devices, you can synchronize their quick effects with your Razer device by clicking the Chroma Sync button ( ).
Advanced Effects
The Advanced Effects option allows you to choose a Chroma Effect you want to use on your Razer Chroma-enabled peripheral. To start making your own Chroma Effect, simply press the Chroma Studio button ( ·:¢:· CHROMA STUDIO ). Click here to learn more about the Chroma Studio
Calibration
The Calibration subtab allows you to optimize your Razer Precision Sensor to any surface for better tracking.
Smart Tracking
Smart Tracking enables you to set the distance at which the sensor stops tracking when it is lifted from its surface to avoid unwanted cursor movement. You may set different values to the lift-off and landing distances by selecting the Enable Asymmetric Cut-Off.
Manual Calibration
To use this feature, you must click the Add A Surface option where you can select from a comprehensive list of Razer mouse mats or add your own mouse mat.
Power
The Power subtab allows you to manage your device’s energy consumption when running on batteries. You can also set your device to enter sleep mode when it has been idle for a certain amount of time.
PROFILES TAB
The Profiles tab is a convenient way of managing all your profiles and linking them to your games and applications.
Devices
View which Razer device is using a specific profile using the Devices subtab. To create a new profile within the selected device, simply click the add button (+ ). To rename, duplicate, or delete a profile, simply press the Miscellaneous button ( ••• ). Each profile can be set to automatically
activate when you run an application using the Link Games option.
Linked Games
The Linked Games subtab gives you the flexibility to add games, view peripherals that are linked to games, or search for added games. You can also sort games based on alphabetical order, last played, or most played. Added games will still be listed here even if it is not linked to a Razer device.
SETTINGS WINDOW
The Settings window, accessible by clicking the ( -¢- ) button on Razer Synapse 3, enables you to configure the startup behavior, change language, view your Razer device’s master guide, or perform factory reset on any connected Razer device.
General tab
The default tab of the Settings window, The General tab enables you to change the software’s display language and start-up behavior, or view the master guide of all connected Razer devices.
Reset tab
The Reset tab allows you to perform a factory reset on all connected Razer devices with on-board memory. All profiles stored on the selected device’s on-board memory will be erased.
Note: Per{arming a f actorv reset on devices without on-board memorv will onlv create a new profile for vour device on Razer Svnapse 3 using the default settings.
About tab
The About tab displays brief software information, its copyright statement, and also provides relevant links for its terms of use. You may also use this tab to check for software updates, or as a quick access to Razer’s social communities.
▪
▪
▪
▪
▪
▪
▪
If you should experience any physical discomfort while using your mouse, such as pain, numbness, or tingling in your hands, wrists, elbows, shoulders, neck or back, please consult a qualified medical doctor immediately.
MAINTENANCE AND USE
The Razer Basilisk Ultimate requires minimum maintenance to keep it in optimum condition. Once a month we recommend you unplug the device from the computer and clean it using a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents.
To get the ultimate experience in movement and control, we highly recommend a premium mouse mat from Razer. Some surfaces will cause undue wear on the feet requiring constant care and eventual replacement.
Do note that the sensor of the Razer Basilisk Ultimate is ‘tuned’ or optimized especially for the Razer mouse mats. This means that the sensor has been tested extensively to confirm that the Razer Basilisk Ultimate reads and tracks best on Razer mouse mats.
8. LEGALESE
COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION
©2019 Razer Inc. All rights reserved. Razer, the triple-headed snake logo, Razer logo, “For Gamers. By Gamers.”, and “Powered by Razer Chroma” logo are trademarks or registered trademarks of Razer Inc. and/or affiliated companies in the United States or other countries. All other trademarks and trade names are the property of their respective owners and other company and product names mentioned herein may be trademarks of their respective companies.
Windows and the Windows logo are trademarks of the Microsoft group of companies.
Razer Inc. (“Razer”} may have copyright, trademarks, trade secrets, patents, patent applications, or other intellectual property rights (whether registered or unregistered} concerning the product in this guide. Furnishing of this guide does not give you a license to any such copyright, trademark, patent or other intellectual property right. The Razer Basilisk Ultimate (the “Product”} may differ from pictures whether on packaging or otherwise. Razer assumes no responsibility for such differences or for any errors that may appear. Information contained herein is subject to change without notice.
LIMITED PRODUCT WARRANTY
For the latest and current terms of the Limited Product Warranty, please visit razer.com / warranty.
LIMITATION OF LIABILITY
Razer shall in no event be liable for any lost profits, loss of information or data, special, incidental, indirect, punitive or consequential or incidental damages, arising in any way out of distribution of, sale of, resale of, use of, or inability to use the Product. In no event shall Razer’s liability exceed the retail purchase price of the Product.
GENERAL
These terms shall be governed by and construed under the laws of the jurisdiction in which the Product was purchased. If any term herein is held to be invalid or unenforceable, then such term (in so far as it is invalid or unenforceable} shall be given no effect and deemed to be excluded without invalidating any of the remaining terms. Razer reserves the right to amend any term at any time without notice.
DOWNLOAD PDF
Razer Basilisk Ultimate Wireless Gaming Mouse Master Guide
