Redragon K631RGB Compact Wireless Hot-Swap Keyboard Guide
Dear user
Thank you for choosing the REDRAGON product. To protect your rights and for better customer service, please read the following warranty rules carefully.
- Within 18 months of purchase date, the repair is guaranteed for failure due to electrical circuit problems. Other damages, such as disassembly, hard impacts, submersion into water, plugging into improper current or voltage, and damage caused by natural disasters such as fire, flood, or earthquake are not included.
- Consumable parts (such as foot pads) and spare parts replacement are not included in our warranty…
OS Support
- WinXP/Vista/Win7/Win8/Win10/Win11
How to connect the keyboard with multiple devices
Wired Connection
Slide the 2.4G/OFF/BT switch on OFF. Take out the USB A to USB Type C cable in the package and connect the keyboard to your computer. The computer will recognize and configure the keyboard automatically. Once the keyboard is connected in wired mode, the side M indicator will be Red when the keyboard is charging and Green when it’s fully charged.
2.4G Wireless Connection
- Slide the 2.4G/OFF/BT switch on the left side of the keyboard to 2.4G.
- Press [FNI (FN1) + [R] for about 3 seconds the side M indicator will flash in Green, and plug the USB receiver into any available USB port on your computer within 20 seconds. The computer will recognize and configure the keyboard automatically.
- Under this mode, it is available with charging by USB cable plug-in, will be in Red, and turn to green after the charge is completed.
Bluetooth Connection
- Slide the 2.4G/OFF/BT switch on the left side of the keyboard to BT. 2. Press [FN1]+[Q BT1/W BT2/E BT3]for about 3 seconds, flashes in Blue(BT1) or Cyan(BT2)or Purple(BT3) quickly. Turn on Bluetooth and scan for available devices on your computer or smartphone. It will find a “BT3.0Keyboard or BT5.0 KB” device. Select one of them to get connected with it automatically.
- To switch the bluetooth connection between BT1 /BT2/BT3, press FN1+Q/W/E.
Function Introduction
- With standard USB and 2.4G/BT connections, the keyboard can be used on a computer without any software or driver installation.
- There are 20 backlight effects and switch by pressing FN+PGUP.
- Commands of key combinations with [FN1] key.
- FN+1 : F1
- FN+2: F2
- FN+3: F3
- FN+4: F4
- FN+5 : F5
- FN+6 : F6
- FN+7 : F7
- FN+8: F8
- FN+9:F9
- FN+0: F10
- FN+” -_” : F11
- FN+” =+”: F12
- FN+” [{” : HOME
- FN+”])” : END
- FN+”;:”:PRTSC
- FN+”‘””: INSERT
- FN+B: Previous Track
- FN+M: Next Track
- FN+N: Play/Pause
- FN+V : Stop
- FN+C: Mute
- FN+Z: Volume-
- FN+X : Volume+
- FN+DEL : RESET
How to recharge the keyboard
The LED indicator of the battery will turn red when the keyboard is out of battery. Find the USB A to USB type C cable in the packaging plug the keyboard and connect it to a computer for charging.
Macro recording function
- Press FN2+ (MR)7 to start recording, now 1-6 keys light up in Red, 7 keys light up in white, CAPS key light up and flash quickly in Red color indicating it is ready for recording.
- press one of the keys from (G1-G6) 1-6 key, the key will light up and flash quickly in Red.
- Record the desired keys.
- Press the FN2+ (MR)7 key to complete the recording (MR key lights OFF). For example:FN2+7→ 1 → ABC → FN2+7
How to play Macro
- FN2+(1-6)key
- For example :FN2+1→ G1 (ABC)
How to delete Macro
- FN2+DEL to delete all Marco
FAQ
- If the keyboard doesn’t respond, please check if the keyboard’s USB cable is correctly inserted into the corresponding USB port on the computer, or try another USB port on the computer.
- If you spill liquid on the keyboard, please remove the keyboard’s USB cable from the computer immediately. Wipe up excess liquid and put the keyboard in a warm place (for instance, under a lamp) to let the keyboard dry naturally before using it again.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
California Proposition 65 A
WARNING: Risk of Cancer from [Name of one or more chemicals known to cause cancer] And Reproductive Harm From [Name of one or more chemicals known to cause reproductive toxicity] Exposure – www.P65Warnings.ca.gov
