Boompods Rhythm 60 Watt Bluetooth Speaker User Manual

Boompods Rhythm 60 Watt Bluetooth Speaker User Manual

In the Box

Controls

1. Long press (23):
   Short press 3 times:
2. Short press:
   Long press 2s:
3. Rotate:
4. Short press:
   Long press 25:
5. Short top 1 time:
   Short top 3 times:
   Short tap 2 times:
   Long tap 25:
   Long top 4s:
6. Microphone

Power on/off.
Factory reset
TWS connection. TWS disconnection
Bluetooth disconnected
Volume + Volume –
Switch LED mode
Tum off LED light
Pouse/play/Pick up/hang up the col
Previous track
Next track/phone coll private
Reject the coll
Switch EQ mode

How to Connect

AUX

Pull waterproof cover up from the bottom (gently) to access AUX port, AUX wil play automatically once AUX cable is inserted. Note LED Indicator will fur Green.

Power bank

Pull waterproof cover up from the bottom (gently) to access USB port. you can use this as an emergency power to your phone or other USB chargeable devices.

Lights

10 Different LED Ights. Short press “” once to change modes, Mode I is defaulted when you power on each time. you can press and hold to switch off lights.

EQ

3 Equalizer settings: bass boost, vocal boost and Boompods Studio are available, to change: Long press indicator area until you hear the setting Vocal prompt, note that Boompods studio is defaulted when you power on.

Calling

When you have a incoming call:

• Short tap once to Answer.
• Short tap Once to hang up.
• Short top twice to move call from speaker to phone to keep call private.
• Tap Hold for 2s to reject call.

Pair 2

If you have already paired the Speaker to your phone or other device (in range) clear them from those devices. Switch on both speakers. Short press ” “button, on one of the speakers, now wait until you hear “BEEP” prompt from both speakers. Now pair to your phone, follow the instruction on previous page.

Charging

Gently remove waterproof cover only until USB-C charging port is exposed. (Please make sure after charging this is securely fixed back in place to avoid water and debris, this could void the warranty) Use supplied USB-C Charging Cable. Use an output source 5V/2A (or above). Charge when you hear “Battery Low” prompt or the LED indicator flash RED. Red LED will be on while charging and switch off when fully charged.

Speaker will power off automatically to save battery when nothing is connected after 10 minutes.

Specifications

Product Name
Bluetooth Version
Battery Capacity
Playing Time
Talking Time
Charging Time
Charging Current
USB-A ouput
Speaker Unit
Product Size
Product Weight
Rhythm 60
5.0
7.4V/3600mAh
8~10 hours (50% Volume)
7-8 hours
4 hours
5V = 2A
5V = 1.5A(Support U-disk)
Mid-Low 20W×2, High 10W×2
336 x 146 x 172mm
2650g

Look after me

• Please read this manual carefully before use and keep it safe.
• First time use. please fuly charge.
• Use certified adapter that has passed national safety certification.
• Charge at least once a month to maintain performance.
• Do not use in extremely hot or cold environments, temperature beyonds S C-35C. If used beyond the above range, the product may stop automatically to protect the internal circuit.
• When charging in high temperature environments, the product may automatically stop charging to protect the battery. At this time, the charging indicator usually flashes quickly 10 indicate that the charging environmental temperature or the product internal temperature is too high.
• Storage environment temperature: -5 ~35 C RH <70% (recommended 20C15).

Important safety instructions:

• Do not disassemble or repair this speaker personaly, otherwise it may cause product damage or personal injury.
• Do not use it in dusty, humid, dry, and high-temperature environments.
• Do not place this product near a heat source, or a place with direct sunlight. lots of dust, or mechanical vibration.
• Do not exceed the IPXS waterproof rating parameters.
• When the product is fully charged, remove from charging.
• The maximum ambient temperature should not exceed 40°C.
• This speaker supports mobile phones/ tablets/ PCs ete. Here this User Manual is illustrated base on mobile phones.

FCC STATEMENT

This device complies with Part 15 of the FCC rules. Operation is subject to the folowing twoconditions:

• this device may not cause harmful interference, and
• this device must acceptany interference received, including interference that may cause undersired operation.

Changes or modifications not expressly approved by the party reponsible for compliance could void your authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communicationsHowever, there is no guarantee that interference will not occur in a particular installation. if this.equipment does cause harmful interference to radio or television reception. which can be determinedby turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connect.
• Consult the decler or an experienced radio/TV technician for help.
• The device has been evaluated to meet general RF exposure requirement. the device canbe used in portable exposure condition without restriction.

REFRENCE LINK