Table of contents
show
Rode VideoMic Pro+ Premium On-camera Microphone Manual
PARTS GUIDE
- Power Button/Status LED
- Safety Channel LED
- High Pass Filter (HPF) Button
- Output Gain Control Button
- High-Frequency Boost LED
- LED Brightness Sensor
- Battery Compartment Latches
- 3.5mm Threaded TRS Output Socket
- Micro USB Charging Socket
- Camera Shoe Mount with 3/8” Thread
- 3.5mm TRS Output Cable (not shown)
- Micro USB Cable (not shown)
- LB-1 Lithium-Ion Rechargeable Battery (not shown)
POWER AND CHARGING STATUS
The Power Button/Status LED (1) indicates power status via color.
Charge
- Slow flashing BLUE = charging
- Fast flashing BLUE = 75% charged
- Solid BLUE = 100% charged
Power Usage (LB-1 Battery* & AA Batteries**)
The VMP+ is designed for best performance with the LB-1 Lithium-Ion Rechargeable Battery. When using the LB-1 Battery or AA Batteries, the Status LED (1) will change color:
- Solid BLUE indicates LB-1 Battery
- Solid GREEN indicates AA Batteries
- Solid RED = 10 hours charge remaining
- Slow flashing RED = 2 hours charge remaining
- Fast flashing RED = 30 minutes charge remaining
The LB-1 Battery charges while inserted into the VMP+ and the included Micro USB Cable is connected to a power source. Rechargeable AA Batteries can be used, but will not charge in the VMP+* Results may vary depending on environmental conditions.
** Results may vary depending on the type of battery used and environmental conditions.
REFERENCE LINK
https://rode.com/en-us/microphones/on-camera/videomic-pro-plus
