SACKit RocKit True Wireless Earbuds User Manual

SACKit RocKit True Wireless Earbuds User Manual

IMPORTANT SAFETY INFORMATION

Please read the following information and operate the product and accessories accordingly to ensure correct and safe use of the product . We are not responsible for damage caused by failure to comply with the instructions or irresponsible use of the product.

• Do not disassemble or replace any parts of this device . Please contact professional maintenance or qualified service center if there is any damage to the device.
•  Do not place in any liquid
• If any liquids flows inside the product, please shut down the product and contact customer service center
• Do not place this device in or close to sources of excessive heat or fire.
• Please shut down in lightning weather
• Keep this device away from any dust and vibration.
•  Do not use excessive force when using any of the control buttons.
•  If the product is below 5°C when you receive it, please open the product packaging and wait for it to reach room temperature .

Box contents

1. ROCKit S earbuds
2.  ROCKit S charging case
3.  USB-C charging cable
4.  Quick start guide

QUICK START GUIDE

When you first get your ROCKit S earphones you need to charge them before they are ready for use . Start by placing your ROCKit S earbuds in the charging case . This is how the earbuds charge . You can charge your case by using the attached USB-C cable and any 5V, 1A power supply . Charge for 2 hours minimum

• The earbuds charge in the charging case.
• The charging case is charged with a USB-C cable.

How to play music

1.  For first use: remove ROCKit S earbuds from the case. Both earbuds will flash white on the top edge LED
2.  Switch on Bluetooth on your device
3.  Choose “ROCKit S” under Bluetooth settings on your device. Your earbuds are now connected with your device
4.  Start playing music on your device
5. ROCKit S automatically switches on/off when connected/disconnected to the charging case. Manually power on/off by holding down the earbud buttons for 10 seconds

THE DEVICE

Battery Information

• Battery: rechargeable Polymer Lithium-Ion Battery, DC: 3.7V/400mAh for charging case, 2 x 85 mAh for earbuds
•  Power: USB DC5V, Please use the USB-C cable included with your ROCKit S earbuds for charging
•  It needs more than 2 hours of charging the first time, then 2 hours for recharging

Correct placement of the ROCKit S earbuds

Place the earbuds in the ears like shown below . It is important that you place the inside ear support downwards. You can twist the earbuds until you find the right placement.

Use ROCKit S earphones

1. For first use: Remove ROCKit S earbuds from the case. Both earbuds will blink white on the top edge LED
2.  The left earbud will blink red/white, indicating ROCKit S is in pairing mode and the earbuds are connected via True Wireless Stereo
3.  Switch on Bluetooth on your device. Choose “ROCKit S” under Bluetooth settings on your device.
4.  Start playing music on your device
5.  ROCKit S automatically switches on/off when connected/disconnected to the charging case. Manually power on/off by holding down the earbud buttons for 10 seconds
6. ROCKit S will automatically pair with the last connected device.

How to pair ROCKit S earbuds with Bluetooth devices

1.  Simply remove your ROCKit S earbuds from the charging case or long press the X button on your earbuds for 10 seconds. After the first 5 seconds, you will hear the ON sound. Keep pressing the button for another 5 seconds to turn on pairing mode, indicated by flashing red and white LED lights
2.  Go into the Bluetooth settings on your device and search for new Bluetooth devices and select ROCKit S
3. The LED light will blink white once ROCKit S is successfully paired
4.  Long press X button on the earbuds to turn off your ROCKit S earbuds
5.  ROCKit S can remember 8 devices: You can pair 8 units with your ROCKit S, at 9th unit ROCKit S will forget the first connected

TROUBLESHOOTING

If you have trouble using your ROCKit S we ask you to try the following solutions. If these solutions does not fix your problem please contact our customer service at info@sackit.dk. My ROCKit S earbuds are not connected to each other

•  Try resetting your ROCKit S earbuds following the description on page 7. You can now reconnect ROCKit S to your device by following the description found on 6

I experience issues with stability and connection

• Try to delete the pairing between ROCKit S and your device on the device . You do this by accessing the Bluetooth settings on your device and choose “forget ROCKit S”. Now pair ROCKit S and your device by following the description found on 6

ROCKit S is not playing music while connected to my device

• If ROCKit S is not playing music even though your device shows it should be, you have to manually choose to play from ROCKit in your device settings. Please refer to the instruction of your device or specific app for further information.

My ROCKit S does not turn off when placed in the charging case

• If ROCKit S earbuds do not turn off when placed in the charging case the case needs to be charged. Please turn off the earbuds manually by pressing the touch button on one of the earbuds for 10 seconds and charge your ROCKit S case

My earbuds do not play with the same sound volume

•  As ROCKit S is an in-ear headset they can be clocked with earwax and dirt . Try removing the silicone tips from the earbuds and clean the small filter. Please follow the cleaning guide found on page 10

CLEANING OF THE PRODUCT

1. Kindly switch off ROCKit S before you clean it and remove the earbuds from the charging case. The earbuds can manually be turned off by pressing the touch button on one of the earbuds for 10 seconds .
2.  Do not use any water, cleaner or chemicals to clean the earbuds
3.  To clean the earbuds, remove the small silicone tip and expose the earbud mesh.
4. Use a dry cotton swab to gently clean the earbud mesh.
5.  Use a soft, dry, and lint-free cloth to wipe the entire earbud and charging case
6.  After cleaning please place the earbuds back into the charging

TECHNICAL SPECIFICATIONS

•  Model: ROCKit S Earbuds
•  IP grade: IPX5
• Bluetooth version: V5.0
•  Bluetooth Solution: Real tek
•  Operating distance: 10M
• Battery: 400mAh charging case, 2 x 85 mAh earbuds
•  Charging time:
  • Earbuds: 1.5 hours
  • Charging case: 2 hours
• USB-C input: 5V/500mAh
•  Music playing time: Up to 9.5 hours for earbuds without charging 10.5 hours of playing time added by the charging case
•  Earbuds call time: Up to 6 hours
•  Driver Unit: Ø6mm
• Frequency Range: 20Hz-20KHz
• Impedence: 16±15Ω at 1000Hz
• Size:
  • Earbud: 23.0*19.8*26.5 mm
  • Charging case: 67.7*45.5*31.3 mm
•  Weight:
• One earbud: 8.8 g
• Charging case: 37.5g

REFERENCE LINK

https://sackit.eu/