SACKit Speak 2003-in-1 True Wireless Sport Earbuds User Manual
BOX CONTENTS
- 1x SACKit Speak 200 Earbuds
- 1x Charging case
- 1x USB charging cable
- 3x different sizes of silicone earbuds tips
- 1x Quick start guide
PRODUCT OVERVIEW
Charging
When you receive your SACKit Speak 200, they must be charged before they are ready for use. Your SACKit Speak 200 must be placed in the corresponding charging box. This is how SACKit Speak 200 charge.
- Place your SACKit Speak 200 charging case on a Qi wireless charger, for example like the SACKit CHARGEit.
- Use the supplied USB-C cable and any 5V, 1A power adapter.
- Earbuds are in the charging case.
- Charging on a Qi wireless charger.
- Charging through the supplied USB-C cable.
NOTE: SACKit Speak 200 turns off automatically when placed in the charging case, provided that the case still has battery
USE SACKIT SPEAK 200 EARBUDS
Place your SACKit Speak 200 earbuds in the charging case. Connect the charging case to a wall plug or place it on a Qi wireless charger (for example like SACKit´s own CHARGEit) and charge for 1.5 hours minimum.
- First use: Remove SACKit Speak 200 earbuds from the charging case.
- Switch on Bluetooth on your device.
- Choose “SACKit Speak 200” under Bluetooth settings on your device.
- SACKit Speak 200 automatically switches on/off when taken removed or placed in to the charging case. Manually power on/off by holding down the earbud buttons for 5 seconds.
- SACKit Speak 200 will automatically pair with the last connected device.
Hybrid ANC
SACKit Speak 200 comes with Hybrid ANC, which is one of the best Active Noise Cancellation you can get. Hybrid ANC works by using both the internal and external microphones to pick up the noise around you and actively try to counteract it. This feature ensures that your music runs smoothly with the SACKit Speak 200.
AI-powered ENC + Bone Analyzer
SACKit Speak 200 provides unmatched noise reduction on your calls using 6 microphones, AI-powered ENC and the Bone Analyzer technology. The Bone Analyzer ensures perfect speech quality on your calls by reading your voice through the jawbone. Combining this feature with an Artificial Intelligence powered ENC enables the SACKit Speak 200 to deliver crystal clear phone calls.
P-Sensor
It is a sensor that detects whether your earbuds are in the ears or not. If you hear music in your earbuds and take one of them out, the SACKit Speak 200 will automatically pause what you hear until you put it back in your ear again.
BASIC FUNCTIONS
Left earbud
- Volume down – 1 tap
- Previous song – Press for 1 sec
- Play / pause – 2 taps
- Take the call – 1 tap
- End the call – 2 taps
- SIRI®/Google™ – 3 taps
- ANC On / Voice Through On / Voice Through Off – Press for 2 sec to switch
Right earbud
- Volume up – 1 tap
- Next song – Press for 1 sec
- Play / pause – 2 taps
- Tale the call – 1 tap
- End the call – 2 taps
- SIRI®/Google™ – 3 taps
- ANC On / Voice Through On / Voice Through Off – Press for 2 sec to switch
LED FUNCTIONS FOR THE SACKIT SPEAK 200 CASE
When earbuds charge in the case
- Left LED flashes: ”L” earbud charges
- Left LED lights up: ”L” earbud is charged
- Right LED flashes: ”R” earbud charges
- Right LED lights up: ”R” earbud is charged
When the case charges with plug / wireless
- 1st LED flashes: 0-25% charged
- 2nd LED flashes: 25-50% charged
- 3rd LED flashes: 50-75% charged
- 4th LED flashes: 75-100% charged
- Press the button at the bottom of the charging case to see the battery status.
TROUBLESHOOTING
If you experience problems with stability or connection, try resetting the SACKit Speak 200. When resetting, SACKit Speak 200 will forget all previous connected Bluetooth devices.
- Hold the lid open and press the button at the bottom of the charging case for 10 seconds
- If the reset works, all 4 LED’s on the case will flash at the same time and then light constantly for 3 seconds after that.
- If the reset does not work, all 4 LED’s will flash 10 times.
- Now connect your SACKit Speak 200 to your Bluetooth device.
CLEANING OF THE PRODUCT
- Do not use any water, cleaner or chemicals to clean the earbuds
- To clean the earbuds, remove the small silicone tip and expose the black speaker fabric
- Use a dry cotton swab to gently clean the speaker fabric.
- Use a soft, dry, and lint-free cloth to wipe the entire earbud and charging case
- After cleaning please place the earbuds back into the charging
TECHNICAL SPECIFICATIONS
- Model: SACKit Speak 200
- IP grade: IPX4
- Bluetooth version: V5.0
- Bluetooth range: 10 m
- Battery:
- Earbuds: 2 x 45 mAh
- Charging case: 600 mAh
- Charging time: 1,5 hours
- Playtime: Up to 32 hours
- Earbuds: 4 hours
- Charging case: 28 hours
- Frequency: 20Hz-20KHz
- Microphones: 3 x 2 pcs.
- Noise Reduction: 35 DB
- USB-C input: 5V/1A
- QI input: 2.5 W
- Dimensions: 61 x 26 x 49 mm
- Weight: 57 g
