Table of contents
show
Shark 2600WA Ultra 2-in-1 Robot Quick Start Guide
Robot Setup:
Set Up Base + Landing Mat
- Remove protective film from the robot and base.
- Snap together the pieces of the landing mat.
- Place the base on top of the landing mat, in a location with a strong Wi-Fi signal.
Attach Side Brush
- Note: Side brush design may vary.
Place Robot on Base
Scan the QR code to download the SharkClean® app.
- Complete your robot setup process in the app and learn about mopping mode.
- To get the best cleaning performance from your robot, we recommend downloading the latest version of the SharkClean® app.
What’s Included:
Two Easy Steps If You’re Stuck:
- Visit: sharkclean.com/support
- Owner’s Guide • Troubleshooting
- How-To Videos • FAQs
- Tips & Tricks
- For additional help, call 1-888-228-5531 for robot support
Maximize Your Robot Experience:
Tips and tricks for getting the most out of your robot.
- To manually turn ON /OFF your robot, hold down the DOCK button for 6-8 seconds.
- Clear the area of cords and wires before each clean.
- Use mopping mode for daily maintenance and stuck-on messes.
- Only use Shark® VACMOPTM cleaning solution or water when mopping.
- Always place your robot on a level surface when performing maintenance.
- Clean brushroll and filter regularly.
DOWNLOAD PDF LINK
https://www.sharkclean.com/products/shark-ai-ultra-2-in-1-robot-vacuum-and-mop-zidWD2KT1
