Shark NV355 Navigator® Lift-Away® Professional User Manual featured img

Shark NV355 Navigator® Lift-Away® Professional User Manual

Shark logo

Shark NV355 Navigator® Lift-Away® Professional User Manual

Shark NV355 Navigator® Lift-Away® Professional User Manual product img

WHAT’S INSIDE

 

  • A  Handle with Stretch Hose
  • B  Floor Nozzle
  • C  Extension Wand
  • D  Accessory Holder
  • E  Portable Lift-Away® Canister
  • F  8″ Crevice Tool
  • G  Dusting Brush
  • H  Wide Upholstery too

ASSEMBLY

Shark NV355 Navigator® Lift-Away® Professional User Manual fig 1

Insert canister into motorized floor nozzle.

Shark NV355 Navigator® Lift-Away® Professional User Manual fig 2

Insert the wand into the canister.

Shark NV355 Navigator® Lift-Away® Professional User Manual fig 3

Connect the handle to the wand, pressing until it clicks into place. Connect a hose to the back of the canister pressing until it clicks into place.

MAINTENANCE

Empty the dust cup after each use 

Shark NV355 Navigator® Lift-Away® Professional User Manual fig 4

Pull up on Dust Cup Release latch and lift the dust cup off the canister.

Shark NV355 Navigator® Lift-Away® Professional User Manual fig 5

Hold Dust Cup over a trash bin and press the empty-release latch on the bottom.

Shark NV355 Navigator® Lift-Away® Professional User Manual fig 6

Press the top Dust Cup Release latch to access the dust screen and remove built-up debris as required.

Cleaning Filters

Shark NV355 Navigator® Lift-Away® Professional User Manual fig 7

Pre-Motor (foam and felt):
With the dust cup removed, take out and rinse the foam and felt filters with water only.

TIP:
Wash filters every 3 months to keep the suction strong. Rinse filters and allow to air-dry completely. Tap loose dirt from foam filters as needed between washes.

Post-Motor (HEPA):
To access the HEPA filter, reach under the grill and pull the Filter Access latch to remove the grill. Remove and rinse the HEPA filter with water only. Let all filters air-dry completely before reinstalling.

VERSATILE FLOOR-TO-CEILING CLEANING

FLOOR CLEANING 

  1. Plug In Vacuum Then place your foot gently on the floor nozzle and tilt the handle back.
    Shark NV355 Navigator® Lift-Away® Professional User Manual fig 8
  2. Choose Setting Slide the power switch to the appropriate floor setting and start cleaning.
    Shark NV355 Navigator® Lift-Away® Professional User Manual fig 9

BRUSHROLL ON/OFF: 

  1. Press the ON/OFF switch at the top of the canister to the I position to vacuum bare floors (straight suction only) or use Lift-Away® mode. To vacuum carpets and rugs, set the switch to the II positions to engage the motorized brush roll.
  2. Press the floor nozzle down with your foot and tilt the handle back towards you to engage the brush roll.

PORTABLE LIFT-AWAY® MODE

  1. Plug In Vacuum Press the Lift-Away button to lift the canister off the floor nozzle. You are now ready to clean those hard-to-reach places.
    Shark NV355 Navigator® Lift-Away® Professional User Manual fig 10
  2. Attach desired cleaning accessory.
    Shark NV355 Navigator® Lift-Away® Professional User Manual fig 11

For questions or to register your product, contact us at 1-800-798-7398 or visit us online at sharkclean.com ©2018 LIFT-AWAY and SHARK are registered trademarks of SharkNinja Operating LLC. NAVIGATOR is a trademark of SharkNinja Operating LLC

REFERENCE LINK

https://support.sharkclean.com/hc/en-us/articles/4401253651868-NV355-Series-Shark-Navigator-Lift-Away-Professional-Owner-s-Guide

DOWNLOAD LINK

Shark NV355 Navigator® Lift-Away® Professional User Manual

Leave a Reply