Shark UV330 Rocket Deluxe Pro Owner Guide

Rocket® Deluxe Pro

UV330

OWNER’S GUID

THANK YOU

for purchasing the Shark® Rocket® Deluxe Pro

CONTENTS

Important Safety Instructions� � � � � � � � � � � � � � � � � � � � � � � � � � � 3 Getting To Know Your Shark® Rocket® Deluxe Pro � � � � � � � � � � 5 Assembling Your Vacuum � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7 Using the Motorized Floor Nozzle � � � � � � � � � � � � � � � � � � � � � � � 8 Using Your Vacuum in Above-Floor Mode � � � � � � � � � � � � � � � � 9 Accessories � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11 Storage � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12

Maintaining Your Vacuum � � � � � � � � � � � � � � � � � � � � � � � � � � � � �  13 Emptying the Dust Cup� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 13 Cleaning the Filters� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �14 Checking for Blockages� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15

Troubleshooting Guide� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� 17 Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18

IMPORTANT SAFETY INSTRUCTIONS

HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

To reduce the risk of electric shock, this vacuum cleaner has a polarized plug (one blade is wider than the other)� As a safety feature, this plug will fit into a polarized outlet only one way� If the plug does not fit fully into the outlet, reverse the plug� If it still does not fit, contact a qualified electrician� DO NOT force into outlet or try to modify to fit�

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

17. Use extra care when cleaning onstairs�
18. DO NOT leave the vacuum cleaner unattendedwhile plugged in�
19. When powered on, keep the vacuum cleaner moving over the carpetsurface at all times to avoid damaging the carpet fibers�
20. DONOT use in the following areas:
    1. Poorly litareas
    2. Wet or dampsurfaces
    3. Outdoorareas
    4. Spaces that are enclosed andmay contain explosive or toxic fumes or vapors (lighter

fluid, gasoline, kerosene, paint,

GENERAL WARNINGS

1. Your vacuum cleaner may consist of a motorized nozzle, wand, hose, and/orvacuum pod� This device contains electrical connections, electrical wiring, and  moving parts that potentially present risk to the user�
2. Use only identical replacement parts�
3. Carefully observe and follow the instructions provided below to avoidimproper use of the appliance� DO NOT use the vacuum for any purpose other than those described in this manual�
4. Before use, carefully inspect all partsfor any damage� DO NOT use if any parts are damaged�
5. Theuse of an extension cord is

NOT recommended�

6. This vacuum cleaner contains noserviceable parts�

USE WARNINGS

7. DO NOT allow the appliance to be usedby children� Close supervision is necessary when used near children� This is not a toy�
8. Alwaysturn off the vacuum cleaner before connecting or disconnecting any motorized nozzles or other accessories�
9. DO NOT handle plug orvacuum cleaner with wet hands�
10. DONOT use without filters in place�
11. Onlyuse Shark® branded filters and accessories� Failure to do so will also void the warranty�
12. DO NOT damage the powercord:
    1. DO NOT pull or carry vacuum cleanerby the cord or use the cord as a handle�
    2. DO NOT unplug by pulling oncord� Grasp the plug, not the cord�
    3. DONOT run the vacuum cleaner over the power cord, close a door on the cord, pull the cord around sharp corners, or leave the cord near heated surfaces�
13. DO NOT put any objects into nozzle oraccessory openings� DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow�
14. DO NOT use if nozzle or accessory airflowis restricted� If the air

paths or the motorized floor nozzle become blocked, turn the vacuum cleaner off and unplug from electrical outlet� Remove all obstructions before you plug in and turn on the unit again�

15. Keep nozzle and all vacuum openingsaway from hair, face, fingers, uncovered feet, or loose clothing�
16. DO  NOT  use if vacuum cleaner is not working as it should, or hasbeen dropped, damaged, left outdoors, or dropped into water�
17. DO NOT place vacuumcleaner

on unstable surfaces such as chairs or tables�

21. YourShark® vacuum may not

be designed to stand up on its own� When taking a break from cleaning, you may need to lean it against furniture or a wall, or lay it flat

on the floor� Using the vacuum for an application where the unit lacks stability may result in personal injury�

22. DO NOT use to pickup:
    1. Liquids
    2. Largeobjects
    3. Hard or sharpobjects

(glass, nails, screws, or coins)

1. Largequantities of dust (drywall dust, fireplace ash, or embers)� DO NOT use as an attachment to power tools for dust collection�
2. Smokingor burning objects (hot coals, cigarette butts, or matches)
3. Flammable or combustible materials (lighter fluid,gasoline, or kerosene)
4. Toxic materials (chlorine bleach, ammonia, or draincleaner)

paint thinners, mothproofing substances, or flammable dust)

24. Turnoff all controls before plugging in or unplugging the vacuum�
25. Unplug from electrical outlet when not in use and before anymaintenance or cleaning�
26. Handwash with water only� Washing with cleaning chemicals could damage the unit�
27. During cleaning or routine maintenance, DO NOT cut anything other than hair, fibers, or string wrappedaround the brushroll�
28. Allowall filters to air-dry completely before replacing in the vacuum to prevent liquid from being drawn into electric parts�
29. Make sure the dust cup and all filters are in place afterroutine maintenance�
30. If provided, secure the power cord around the two cord hooks duringstorage�

GETTING TO KNOW YOUR SHARK® ROCKET® DELUXE PRO

ASSEMBLING YOUR VACUUM

USING THE MOTORIZED FLOOR NOZZLE

DID YOU KNOW?

The motorized floor nozzle and handheld vacuum have LED lights that illuminate the floor surface being cleaned� The lights turn on automatically in either speed setting�

NOTE: To place in MultiFLEX® Storage mode, press the MultiFLEX lock release button and gently fold the handheld vacuum forward toward the floor nozzle�

NOTE: Before vacuuming your small area rugs

or carpet, refer  to the manufacturer’s recommended cleaning instructions�

WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?

Solid Green

The brushroll is on and working as it should�

Solid Red

There is a jam in the brushroll area� Turn your vacuum off and remove the blockage�

No Light

The brushroll is not spinning�

Flashing Red

The motorized floor nozzle is overheating� Turn your vacuum off and wait

for it to cool down� See Troubleshooting section for more information�

CLICK

CLICK

• Insert the wand into the motorized floor nozzle connector, pressing it in until it clicks securely into place�
• Insert the handheld vacuum into the top of the wand,pressing it in until it clicks securely into place�

1 Slide the Power/Selector Switch to the appropriate setting:

Setting O: Turns off power�

Setting I: For cleaning bare floors and small area rugs�

Setting II: For cleaning carpets�

To start cleaning, recline wand to activate brushrolls�

NOTE: For deep carpet cleaning per ASTM F608 (embedded dirt in carpets) please use setting II, Carpets�

Using the MultiFLEX® Wand

To easily access hard-to-reach areas under furniture, press the MultiFLEX lock release button to position the wand to a lower angle�

7 1-800-798-7398

USING YOUR VACUUM IN ABOVE-FLOOR MODE

STEP 1 STEP 2

For Short-Reach Cleaning:

1 Press the Wand Release button on the top of the wand to detach the handheld vacuum�

2 Attach desired cleaning accessory or motorized floor nozzle to the handheld vacuum� The LED light on the handheld vacuum turns on

automatically when the power is on�

ACCESSORIES STORAGE

MAINTAINING YOUR VACUUM

STEP 2

Post-Motor filter

• Hold dust cup over a trash bin and pressthe Empty button on the front of the dust cup� The bottom lid will open, allowing the debris to fall out�
• Once dust cup is empty, close the bottomlid and insert dust cup back into handheld vacuum, pressing it in until it clicks into place�

CLEANING THE FILTERS

• Access the Pre-Motor foam and felt filters by lifting the latch on the top ofthe handheld vacuum� Remove and rinse the filters with water� DO NOT use soap� Tap loose dirt off filters between washes as needed� Allow filters to air-dry completely, then reinstall them� Insert the felt filter first, then place the foam filter on top of it�
• Access the Post-Motor filter under thehandle� Remove and rinse the filter with water� DO NOT use soap�

MAINTAINING YOUR VACUUM – continued

STEP 1 STEP 3

STEP 2 STEP 4

BOTTOM OF FLOOR NOZZLE

• Usea coin to open the three locks on the bottom of the floor nozzle�
• To access the brushroll, remove the cover from the bottom of the floornozzle� Shine a flashlight from the bottom to check for possible blockages in the airway�
• Removeany string, carpet fibers, or hair that may be wrapped around the brushroll� Loosen debris by running a pair of scissors along the groove in the brushroll�
• To reinstall the cover, line it up, then rotate down until it clicks intoplace� Use the edge of a coin to close the three locks on the bottom of the nozzle�

TROUBLESHOOTING GUIDE

FIVE (5) YEAR LIMITED WARRANTY

Vacuum is not picking up debris� No suction or light suction�

(Refer to Maintenance section for more information�)

• Checkfilters to see if they need cleaning� Follow instructions for rinsing and completely air-drying the filters before reinserting in the vacuum�
• Dustcup may be full; empty dust cup�
• Checkfloor nozzle for blockages; clear blockages if required�
• Removeany string, carpet fibers, or hair that may be wrapped around the brushroll�

Vacuum lifts area rugs�

• Suctionis powerful� Take care when vacuuming area rugs or rugs with delicately sewn edges�
• Turnoff the unit to disengage the brushroll and restart with the power/selector switch�

Brushroll does not spin�

• If Brushroll Indicator Light on the floor nozzle turns red, the brushroll has stopped spinning�Immediately turn off and unplug vacuum and remove blockage� Reconnect to power and turn vacuum back on�
• If Brushroll Indicator Light on the floor nozzle is green, the blockage has been successfullycleared� If the light is still red, please contact Customer Service at 1-800- 798-7398�

Vacuum turns off on its own or indicator light flashes red�

This vacuum is equipped with a motor-protective thermostat so the vacuum will shut off if it overheats� Should this occur, perform the following steps to restart the motor- protective thermostat:

1� Turn vacuum off and unplug it�

2� Empty dust cup and clean filters (see Maintenance section)� 3� Check for blockages in hose, accessories, and inlet openings� 4� Allow unit to cool for a minimum of 45 minutes�

5� Plug in vacuum and turn it on�

NOTE: If vacuum still does not work properly, contact Customer Service at 1-800-798-7398�

The Five (5) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.

SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of five (5) years from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:

What is covered by this warranty?

1. The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole discretion,will be repaired or replaced up to five (5) years from the original purchase
2. Inthe event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is  SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?

1. Normalwear and tear of wearable parts (such as foam filters, HEPA filters, pads, ), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are available for purchase at sharkaccessories.com.
2. Any unit that has been tampered with or used for commercial
3. Damagecaused by misuse (e.g., vacuuming up water or other liquids), abuse, negligent handling, failure to perform required maintenance (e.g., not cleaning the filters), or damage due to mishandling

in transit.

4. Consequential and incidental damages.
5. Defectscaused by repair persons not authorized by  These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the repair is performed by a repair person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North

How to get service

If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit sharkclean.com/support for product care and maintenance self-help. Our Customer Service Specialists are also available at 1-800-798-7398 to assist with product support and warranty service options, including the possibility of upgrading to our VIP warranty service options for select product categories.

SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of

$24.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.

How to initiate a warranty claim

You must call 1-800-798-7398 to initiate a warranty claim. You will need the receipt as proof of purchase.

A Customer Service Specialist will provide you with return and packing instruction information.

How state law applies

This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE�

This Owner’s Guide is designed to help you get a complete understanding of your new Shark® vacuum.

SharkNinja Operating LLC US: Needham, MA 02494

CAN: Ville St-Laurent, QC H4S 1A7

1-800-798-7398

sharkclean.com

Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice.

For SharkNinja U.S. Patent information, visit sharkninja.com/uspatents

© 2019 SharkNinja Operating LLC. MULTIFLEX, ROCKET, and SHARK are registered trademarks of SharkNinja Operating LLC. HARD FLOOR HERO is a trademark of SharkNinja Operating LLC.

UV330_IB_REV_Mv11 PRINTED IN CHINA

DOWNLOAD LINK

Shark UV330 Rocket Deluxe Pro Owner Guide

https://www.sharkclean.com/