Table of contents
show
8bitdo SN30 Pro Bluetooth Controller for Android User Manual
SN30 Pro Bluetooth Controller for Android
- press the Xbox button to turn on the controller.
- hold the Xbox button for 6 seconds to turn off the controller.
Android
- system required: Android 9 or above.
Bluetooth Connection
- press the Xbox button to turn on the controller, status LED starts to blink.
- hold the pair button for 3 seconds to enter its pairing mode, the status LED starts to blink rapidly. (This is required for the very first time only)
- go to your Android device’s Bluetooth setting, pair with [8BitDo SN30 Pro for Android], LED stays solid when the connection is successful.
Wired Connection
*OTG support is required on your Android device, please contact your device manufacturer for more details. Connect the controller to the USB port of your Android device, and wait till the controller is successfully recognized by your Android device to play.
Apple®
* required system: iOS 16.3. iPadoS° 16.3, tvOS® 16.3, macOS® 13.2 or above. Apple®, iPadOS®, macOS®, and tvOS® are trademarks of Apple Inc., registered in the U.S. and other countries.
Bluetooth Connection
- press the Xbox button to turn on the controller, status LED starts to blink.
- hold the pair button for 3 seconds to enter its pairing mode, the status LED starts to blink rapidly. (This is required for the very first time only)
- go to your Apple device’s Bluetooth setting, and pair with [8BitDo SN30 Pro for Android]. LED stays solid when the connection is successful.
Button Swap
- LED blinks continuously when the swapped button is pressed.
- the swapped buttons will not be saved after turning off the controller.
- D-Pad, view, menu, LT, RT, and Xbox buttons are not supported.
Hold either two buttons you would like to swap, then press the star button to activate/deactivate the button swap.
Battery
Built-in 480mAh Li-on battery with 16 hours of playtime, rechargeable with 1 to 2 hours of charming time.
Ultimate Software
- it gives you elite control over every piece of your controller: customize button mapping, adjust stick & trigger sensitivity. Please visit support.8bitdo.com for the application.
- press the profile button to activate/deactivate the custom profile. The profile indicator will not light up when using the default setting.
