Sonoff-DW2-RF-RF-Wireless-Door-Window-Sensor-User-Guide-Feature-Image

Sonoff DW2-RF Wireless Door-Window Sensor User Manual

Views: 46
Table of contents show

Sonoff-DW2-RF-RF-Wireless-Door-Window-Sensor-User-Guide-Image-1

Sonoff DW2-RF Wireless Door-Window Sensor User Manual

Sonoff-DW2-RF-RF-Wireless-Door-Window-Sensor-User-Guide-Image-2

Install batteries Sonoff-DW2-RF-RF-Wireless-Door-Window-Sensor-User-Guide-Image-3

Remove the back cover of the transmitter

Sonoff-DW2-RF-RF-Wireless-Door-Window-Sensor-User-Guide-Image-4Sonoff-DW2-RF-RF-Wireless-Door-Window-Sensor-User-Guide-Image-5

Insert batteries into the battery compartment based on

INSTALLATIONSonoff-DW2-RF-RF-Wireless-Door-Window-Sensor-User-Guide-Image-6
Sonoff-DW2-RF-RF-Wireless-Door-Window-Sensor-User-Guide-Image-7Sonoff-DW2-RF-RF-Wireless-Door-Window-Sensor-User-Guide-Image-8

  1. Tear off the protective film of the 3M adhesive.
  2. Try to align the mark line on the magnet with that on the transmitter during installation.
  3. Install them in the opening and closing area separately (such as windows).

Sonoff-DW2-RF-RF-Wireless-Door-Window-Sensor-User-Guide-Image-9Make sure the installation gapis less than 5 mm when the door or the windows closed.

Add sub-devices

Sonoff-DW2-RF-RF-Wireless-Door-Window-Sensor-User-Guide-Image-10Sonoff-DW2-RF-RF-Wireless-Door-Window-Sensor-User-Guide-Image-11

Access the eWelink APP and select the Bridge,tap”Add” to select the alarm,and a”Beep” means the Bridge enters the pairing mode. Then separate the magnet for more than 20 mm from the transmitter until the LED indicator stays on for 1 to 2s,and the pairing is complete when you hear”Beep Beep”.

DOWNLOAD PDF

Sonoff DW2-RF Wireless Door-Window Sensor User Manual

REFERENCE LINK

https://sonoff.tech/

Tags: , , ,

Leave a Reply