SONY MDR-100AAP h.ear on Headphones User Manual
How to use
Notes
- To disconnect the cable, pull it out by the plug, not the cable. Otherwise the cable may break.
- When connecting the cable, make sure to align the plug with the slots in the jack and fully insert it. If the plug is not fully inserted, no sound may result.
- Be careful not to catch your fingers when you fold the headphones.
If you install the Smart Key app* from the Google PlayTM store, the track and volume adjustment on your smartphone will be enabled with the multi-function button.
- Smart Key is an application for XperiaTM, AndroidTM OS 4.0, and above. The app may not be available in some countries and/or regions, and may not be used with unsupported smartphone models.
https://play.google.com/store/apps/details?id=com.sonymobile.extras.liveware.extension.smartkey
Compatible products
Use this unit with smartphones
Notes
- If you connect to an unsupported smartphone, the microphone of this unit may not function, or the volume level may be low.
- This unit is not guaranteed to operate digital music players.
Using the Multi-function button
Press once to answer the call, press again to end; press to play/pause a track.
Available operations for iPhone
Plays/pauses a track of the connected iPhone product with a single press. Skips to the next track with a double press. Skips to the previous track with a triple press. Starts the “VoiceOver**” feature with a long press (if available). Hold down for about two seconds to reject an incoming call. When you let go, two low beeps confirm the call was rejected.
- The button function may vary depending on the smartphone.
- Availability of the “VoiceOver” feature depends on the iPhone and its software version.
Specifications
Headphones
- Type: Closed, dynamic (circum-aural)
- Driver unit: 40 mm, dome type (CCAW Voice Coil)
- Power handling capacity: 1,500 mW (IEC*)
- Impedance: 24 Ω at 1 kHz
- Sensitivity: 103 dB/mW
- Frequency response: 5 Hz – 60,000 Hz
- Mass: Approx. 220 g (8 oz) without cable
Microphone
- Type: Electret condenser
- Directivity: Omni-directional
- Open circuit voltage level: –40 dB (0 dB = 1 V/Pa)
- Effective frequency range: 20 Hz – 20,000 Hz
Supplied accessories
Headphone cable (inline remote and microphone, approx. 1.2 m (47 1 /4 in), L-shaped gold-plated 4-pole mini plug) (1) Carrying pouch (1) * IEC = International Electrotechnical Commission.
Design and specifications are subject to change without notice. iPhone is a trademark of Apple Inc., registered in the U.S. and other countries. XperiaTM is a trademark of Sony Mobile Communications AB. AndroidTM and Google PlayTM are trademarks or registered trademarks of Google, Inc.
Precautions
High volume may affect your hearing. For traffic safety, do not use it while driving or cycling.
- Because the headphones are of a high-density enclosure, forcing them against your ears may result in eardrum damage. Avoid using headphones where they are liable to be struck by people or other objects, such as a ball, etc. Pressing the headphones against your ears may produce a diaphragm-click sound. This is not a malfunction.
The validity of the CE marking is restricted to only those countries where it is legally enforced, mainly in the countries EEA (European Economic Area).
Optional replacement earpads can be ordered from your nearest authorized Sony retailer or www.sony.com. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
REFERENCE LINK
https://www.sony.com.tw/en/electronics/headband-headphones/mdr-100aap
