Table of contents
show
Soundcore Life Q20 Headphone User Manual
Powering On / Off
Power On
- Press and hold for more than 3 seconds
- Flashing blue (Status indicator)
Power Off
- Press and hold for 3 seconds
- Steady red for 1 second (Status indicator)
ANC On
- Press and hold for more than 1 second
- Steady green (NC LED indicator)
ANC Off
- Press and hold for more than 1 second
- NC LED indicator off
Pairing
- Rapidly flashing blue Pairing mode
- Steady blue Connected to a device(but is not playing music)
- OFF(Status indicator) Connected to a device(playing music)
- Rapidly flashing blue Connected to a device(Incoming call)
Charging Your Headphones
- Notification sound (Tone) :There are only 2 hours of playtime left. You will hear a voice prompt every
30 minutes. - Low battery
- Flashing red once every 60 seconds
- (Bluetooth LED indicator)
- Steady red (Status indicator) Charging
- Note: Do not switch on Life Q20 while charging.
- Off (Status indicator)
- Fully charged
Specifications
- Input 5 V 0.65 A
- Impedance 16 Ω
- Charging time 3 hours
- Driver (full range) 40 mm x 2
- Playtime (Bluetooth with ANC mode on) 40 hours
- Frequency response 16 Hz – 40 KHz
- Playtime (Bluetooth with ANC mode off) 60 hours
- Bluetooth version V 5.0
- Playtime (Connected to audio cable with ANC mode on) 35 hours
- Range 15 m / 49.21 ft
- Weight 268 g / 9.5 oz
Controls
Bluetooth mode
- Press Play / pause
Note: the status indicator will light up in blue for 2 seconds, then turn off
- Press and hold for 1 second Next track
- Press and hold for 1 second Previous track
- Press Volume up / down
- Default mode Normal Equalizer
- Press multi-function key twice
Note: Press twice again to switch back to
Normal Equalizer. BassUP™(Dual Equalizer) - Press and hold for 1 second ANC mode (Active noise canceling mode) activation ANC mode (Active noise canceling mode) deactivation
