Eufy T2401 Home Vac Owner Manual

Eufy T2401 Home Vac Owner Manual

IMPORTANT SAFETY INSTRUCTIONS.

• Fully assemble before operating.
• Intended for household use only.
• Do not use it outdoors or on wet surfaces.
• Do not leave the vacuum cleaner unattended when it is plugged in. Unplug it from the outlet when you are not using it and before servicing.
• Do not allow it to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer-recommended attachments.
• • For the purposes of recharging the battery, only use the detachable power supply unit provided with this device.
• Do not use a damaged cord or plug. If the appliance is not working as it should or has been dropped, damaged, or submerged in water, contact our customer service for advice.
• Do not handle the plug or appliance with wet hands.
• Do not unplug the adapter by pulling on the cord. To unplug, grasp the plug, not the cord.
• Do not pull the cord around sharp edges or corners. Do not run the appliance over the cord. Keep the cord away from heated surfaces.
• Do not put any objects into openings or vents. Do not use it if any opening is blocked. Keep free of dust, lint, hair, and anything else that may reduce airflow.
• Keep hair, loose clothing, fingers, and other body parts away from openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Always turn off this appliance before connecting or disconnecting the motorized floor brush.
• To prevent unintentional starting, ensure the appliance is switched off before installing the battery pack, picking up or carrying the appliance. Do not carry the appliance with your finger on the power switch, doing so may cause accidents.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.

At a Glance

1. Handle
2. On / Off button
3. Power saving button
4. Charging socket
5. Power indicator
6. Dust collector release button
7. Dust collector
8. HEPA-style filter
9. Spare HEPA-style filter
10. Pre-filter
11. Floor brush release button
12. Headlights
13. Rolling brush
14. Charging adapter
15. Wall mount
16. Mounting hook
17. Screws (×3)
18. Plastic wall anchor (×3)
19. Cleaning tool

Assembling Your HomeVac
Unscrew the bolt. Insert the handle into the main body and secure it with the bolt. Lower the main body onto the floor brush until it clicks into place.

Wall Mounting Your HomeVac

Make sure there is a power outlet nearby.

1. Measure 1.2 meters above the ground.
2. Cut out the Drill Hole Marker on Page 7.
3. Paste the Drill Hole Marker on the wall and drill 3 holes as marked.
4. Push the plastic wall anchors fully into the holes.
5. Screw the wall mount into place.
6. Slip the wall mounting hook into the slot.
7. Slide HomeVac down into the holder.

Charging Your HomeVac

1. Mount HomeVac onto the wall.
2. Insert the round connector into the charging socket.
3. Plug the adapter into a wall outlet.

Cleaning and Maintenance

Clean the dust collector and filters

1. Press the dust collector release button to separate the dust collector.
2. Hold the dust collector over a garbage can and then pull the tab near the bottom of the collector.
3. Remove and separate the filter assembly.
4. Empty dust from the dust collector and the HEPA-style filter weekly. Tap to remove excess dust.
5. Rinse the filter assembly with water if it becomes too dirty.
   NOTE: Washing the HEPA-style filter with water will degrade its performance. After washing the filter three times, it is recommended to replace with a new one for best cleaning performance.
6. Air-dry the HEPA-style filter thoroughly before reusing. A wet filter may affect the cleaning power or even damage HomeVac.
7. Replace the filter assembly.
8. Insert the dust collector into the main body.

Clean the rolling brush

1. Press the floor brush release button to separate the floor brush.
2. Pull the locking button and lift the rolling brush out.
3. Carefully cut off any hair or fibers tangled in the rolling brush with the supplied cleaning tool or scissors.

Specifications

• Model T2401
• Voltage DC 28.8 V
• Wattage 140 W
• Size 261 × 220 × 1091 mm / 10.3 × 8.7 × 43.0 in

Notice

The symbol on the device or its packaging indicates: Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local authority for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new ones, the retailer is legally obliged to take back your old appliance for disposal at least free of charge.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

Eufy T2401 Home Vac Owner Manual

REFERENCE LINK

https://us.eufy.com/