Table of contents
show
Taotronics TT-BA08 Bluetooth Transmitter Wireless Adapter User Manual
Package Content
- TaoTronics Wireless 2-in-1 Adapter (Model: TT-BA08)
- 3.5mm Audio Cable
- 3.5mm Female to 2 RCA Male Cable
- USB Charging Cable
- User Guide
Product Diagram
- Volume – / Previous Track
- Volume + / Next Track
- Transmitter (TX) / Receiver (RX) Mode Switch
- LED Indicator
- Power Button
- Charging port
- 3.5mm Audio Port
Control Functions
| Function | Operation |
| Power On / Off | Press and hold the Power Button for 3 seconds |
| Pairing | When powered on, press the Power Button twice to start pairing |
| Mode Switch | Slide the Mode Switch to and from TX and RX |
| Play / Pause | In RX mode, press the Power Button once to play / pause music |
| Volume + / – | In RX mode, press and hold the Volume + / – Button |
| Next / Previous Track | In RX mode, press the Volume + / – Button once |
LED Indicators
| LED Indicator | Status |
| Solid Red LED | Charging |
| LED Off | Fully charged |
| Flashing Red and Blue | Pairing in TX / RX mode |
| Flashing Red | Low battery |
| Solid Blue LED | Successfully paired |
| Flashing Blue | Powered on but not paired with Bluetooth® devices |
How to Use
Charging
- Use a micro USB cable and connect the adapter to any active USB port.
- The LED indicator will turn red when charging. It will automatically turn off when the device is fully charged.
Pair in TX mode:
- Set the TT-BA08 to TX mode and connect it to your NonBluetooth® audio transmitting device.
- Place your Bluetooth® audio receiving device, like earphones / speakers, within a 3 feet / 1 meter range and set it to pairing mode.
- Turn on the TT-BA08 and tap the power button twice to enter pairing mode. After approximately 10 seconds, pairing will complete.
Pair with two devices at the same time
In TX mode:
- Follow the previous instructions in the “Pairing” section to pair the TT-BA08 with your first device.
- Turn off the Bluetooth® function on your first device, tap the Power Button twice to pair and connect to your second device.
- Turn on the Bluetooth® function on your first device. In approximately 10 seconds, the first device will automatically connect in.
In RX mode:
- Follow previous instructions in the “Pairing” section to pair the TT-BA08 with your first device. Disable the Bluetooth® function on your first device. Tap the Power Button twice to pair with the second device.
- Turn on the Bluetooth® of the first device, now TT-BA08 adapter is successfully paired with both devices.
