Taylor 7405 Digital Bathroom Scale User Manual

Taylor 7405 Digital Bathroom Scale User Manual

CUSTOMER SERVICE INFORMATION PLEASE READ!
For questions regarding this product, please contact us at:

TAYLOR division of Lifetime Brands, Inc.
2220 Entrada Del Sol, Suite A | Las Cruces, New Mexico 88001 USA
1-866-843-3905 | www.taylorusa.com
Email: taylorusa@lifetimebrands.com

We value your thoughts on our products and services. Please post an online review to help us continue to meet your needs and expectations. Please contact us before returning to the retailer.

When Initially Setting Up Your Scale

1. Place your scale on a hard, flat surface, do not use it on uneven tile, flooring, or carpeting. Try to keep your scale in the same location or position as much as possible.
2. Step on the scale with one foot applying enough pressure to turn the scale on – then remove your foot.
3. The digital readout should show dashes or zeros.
4. The scale will automatically turn off.
5. Now your scale is ready for you to take a weight reading. Step on the scale evenly with both feet. NOTE: If you’ve weighed yourself and a “C” is displayed after the zero, weigh yourself again for a more accurate reading. Your weight cannot be locked in if you do not stand still.
6. If you pick up, move, or bump your scale, please repeat the steps above for the best accuracy.

Quick Use & Helpful Tips

• Place your feet in the same position every time you weigh yourself. Stand still during measurement.
• Weigh yourself without clothing whenever possible. Clothes can vary in weight.
• Move the scale to a location where it won’t be bumped. If your scale is bumped while being activated or while in use, an inaccurate reading may occur.
• For the most consistent readings, weigh yourself at the same time of day. Allow for weight fluctuations due to food or drink in your system.

Preparation Before Use

INSERT THE BATTERIES

1. Use 3 AAA batteries (included. Remove any plastic wrap from the batteries before proceeding). Always replace all batteries at the same time; do not combine old and new batteries. Do not mix Alkaline, carbon-zinc (standard) or Nickel-Cadmium
   (rechargeable) batteries.
2. Open the battery compartment on the bottom of the scale.
3. Place the new batteries into the battery compartment according to the “+” and “-“ polarity symbols at the bottom of the compartment.
4. Replace the battery compartment cover.

WEIGHT UNIT SETTING

• Your scale is set at the factory to weigh in pounds (lb).
• You may select kilogram units of measurement by pressing the button on the bottom of the scale while the scale is on. (Press lightly on the platform to turn the scale on.)
• Some models have a static cling label on the LCD lens to prevent scratching. Remove before use

SET THE SCALE IN THE RIGHT POSITION

• Always use the scale on a flat and hard floor surface. Do not use on carpets.

START-UP THE SCALE

• Press firmly once on the scale platform to start-up the scale. The display shows “0.0” and then turns off. The scale is ready for use.
  Note: If you move the scale at all, please repeat the steps above for best accuracy

Battery Warnings!

Batteries may pose a choking hazard. As with all small items, do not let children handle batteries. If swallowed, seek medical attention immediately.

PRECAUTION:
Do not dispose of batteries in fire. Batteries may explode or leak. Remove the batteries if the scale will not be used for a long period of time.

NOTE:
Clean the contacts of the batteries and of the device prior to battery installation. Remove used batteries promptly. Please recycle or dispose of batteries per local regulations.

Error Icons

This scale has a low battery indicator. It will display or readings will grow dim or become irregular if the batteries need replacement.

“O-Ld” indicates an overload warning. The maximum capacity of this scale is 440 lbs / 200 kgs. Should “O-Ld” appear on the display during a weighing, this indicates that the maximum weighing capacity of the scale has been exceeded. Remove the weight immediately; otherwise, permanent damage may occur.

If the scale displays “Err”, this indicates the weight is not stable and the scale cannot lock in the weight. Step off and back onto the scale, standing still while your weight computes.

Party issuing Supplier’s Declaration of Conformity &
Responsible party – U.S. Contact information:
Taylor division of Lifetime Brands Inc.
2311 W. 22nd Street, Suite 200
Oak Brook, IL 60523

Equipment:

• Product Name: Digital Scale
• Model No.: 7405
• Trade Name: Taylor

We declare under our sole responsibility that the above referenced product has been tested according to FCC requirements and this device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Five (5) Year Limited Warranty

This scale is warranted against defects in materials of workmanship (excluding batteries) for five (5) years for the original purchaser from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair. Do not return to retailer. For product support & warranty information: Please contact us with proof of receipt) at:

TAYLOR
2220 Entrada Del Sol, Suite A
Las Cruces, New Mexico 88001 USA
Phone: 1-866-843-3905
Email: taylorusa@lifetimebrands.com

There are no express warranties except as listed above. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. For additional product information, or warranty information outside the USA, please contact us through www.taylorusa.com. © 2021 Taylor division of Lifetime Brands Inc. All rights reserved. Made to our exact specifications in China. Not legal for trade.

REFERENCE LINK