OutDoor Tech OT0053 CHIPS 3.0 Bluetooth Snow Helmet Speakers User Guide

OutDoor TECH OT0053 CHIPS 3.0 Bluetooth Snow Helmet Speakers User Guide

ANATOMY

A.  Left ear button D
B.  Right ear button
C.  Charge port USB-C
D.  LED light
E.  Microphone

FUNCTIONSPOWER UP 

For best results, fully charge your CHIPS® 3. The indicator light located on the right ear piece will flash red to indicate a low battery.

PAIRING

• VOICE PROMPT: “power on>>pairing” Choose: “ODT Chips® 3.0” in your phone’s Bluetooth settings.
• VOICE PROMPT: “connected” (If prompted by your device to connect, select “Yes”.

TALK

• Answer a call                 Press right ear button
• End a call                       Press right ear button
• Reject a call                   Press and hold the right ear button for two seconds
• Make a call                    Use your phone to dial as usual Listen & talk through the CHIPS®
• Volume up                     Double press the left ear button
  Volume down                Press left ear button

PUT THE CHIPS IN YOUR HELMET

1. Drop the CHIPS® 3.0 into the slots inside your helmet liner
2. Rock out, make calls, and, you know, ski and snowboard and whatnot.

SPECS

• Battery life                   13 hours of play time
• Bluetooth version       V5.2
• Bluetooth profiles      HFP1.8, HSP1.2, A2DP1.3, AVRCP1.6
• Operating distance     33 feet, 10 meters
• Charging input           DC 5.0V, 1A
• Dimensions                 2” diameter, 0.5” thick
• Weight                         0.18 lbs (81.6g)
• Battery capacity         250mAh

 CARE & MAINTENANCE

• Keep the CHIPS® 3.0 away from direct sunlight or hot places.
• Do not try to disassemble the CHIPS  3.0.
• Do not let the CHIPS® 3.0 fall onto the floor or other hard surfaces.
• Do not use intensive chemical products or detergent to clean the product.
• Do not scratch the surface with sharp things.

REFERENCE LINK

https://www.outdoortechnology.com/