TREBLAB FX100 Portable Bluetooth Speaker User Guide
SAFETY RULES
- Don’t disassemble or modify your speaker for any reason. Doing this may cause the speaker to malfunction or become combustible. The damage to your device can void the manufacturer’s warranty.
- Make sure the speaker is completely dry before charging.
- Clean only with a dry cloth.
- Avoid exposing TREBLAB FX100 to extreme temperatures (below 37°F / 3°C or above 112°F / 45’C). Extreme temperatures can cause the deformation of the FX100 components and reduce the battery life and the lifespan of your new speaker.
- Don’t put the device’s LED lights close to humans’ or animals’ eyes.
- Do not use FX100 during a thunderstorm. Thunderstorms can cause serious may function and increase the risk of electric shock.
WHATS IN THE BOX
- User’s manual
- Insert card
- Speaker
- Carabiner
- 3.5mm Audio cable
BUTTONS AND PARTS
| Function | Operation |
| Power ON | Press and hold the POWER button for 3 seconds. |
| Power OFF | Press and hold the POWER button for 2 seconds. |
| Play/ Pause | Press the PLAY/ PAUSE butt on. |
| Volume + | Press and hold the VOLUME+ button. |
| Volume – | Press and hold the VOLUME – button. |
| Next track | Press the VOLUME + button . |
| Previous track | Press the VOLUME – button. |
| BASS BOOST mode | Short press the POWER to improve bass reproduction when using outdoors. |
| Answer/ End a phone call | Press and hold the PHONE button during the incoming call. |
| Reject a phone call | Press twice the PHONE button . |
| Voice assistant activation | Press twice the PHONE but ton while speaker connected to smart device. |
| TWS mode | Press twice the PHONE butt on on one of the FX100 speakers while both of them are turned on and not paired. This will be the main speaker that connects |
SETTING UP YOUR FX100
Turn ON
Press and hold the POWER button for 3 seconds. You will hear the “BLUETOOTH MODE” voice prompt and the BLUE and RED LED light will start flashing.
Tum OFF
Press and hold the POWER button for 2 seconds. You will hear the “POWER OFF” voice prompt and the flashing BLUE LED light will turn OFF.
WIRELESS PAIRING
Make sure TREBLAB FX100 is charged and that the 3.5mm audio cable is not plugged in.
- Turn on your speaker by pressing and holding the POWER button for 3 seconds. You will hear the “POWER ON” and “BLUETOOTH MODE” voice prompt and the LED light will start flashing RED and BLUE indicating that the speaker is in pairing mode.
- Activate the Bluetooth mode on your smart device.
- Select TREBLAB FX100 from the available Bluetooth devices list. Keep it within 3 feet/ 1 meter from the speaker while pairing.
- If necessary, enter the passcode 0000.
- Once FX100 is successfully paired and connected, you will hear the “CONNECTED” voice prompt and the LED will light up BLUE.
REPAIRING
After the initial pairing, the speaker will automatically connect to the previously paired device when turned on again. If the reconnection does not happen automatically, the speaker will start looking for any other previously paired device within the effective distance range. TREBLAB FX100 can save up to 2 recently paired devices.
TRUE WIRELESS STEREO {TWS)- PAIRING TWO SPEAKERS
If Place two FX100 (BT 5.0 version) speakers near each other (the distance should not be over 3 feet/ 1 meter) Power on both speakers. You will hear the “POWER ON” and “BLUETOOTH MODE” voice prompts. Press twice the PHONE button on any of the speakers this speaker will be the main one. After some time you will hear the “LEFT CHANNEL” and “RIGHT CHANNEL” prompts from TWS connected speakers.
AUDIO PLAYBACK
- To pause and resume the playback when connected wirelessly, press the PLAY / PAUSE button.
- To adjust the volume, press and hold the VOLUME+ or the VOLUME – button while listening to music.
- To change the track on FX100, press the VOLUME + or the VOLUME – button.
PHONE CALLS:
TREBLAB FX100 can be used to make and receive phone calls when connected wirelessly. Audio playback will be paused during the calls.
| To Answer a call: | Press the PHONE button. |
| To Reject a call: | Press and hold the PHONE button for 2 seconds during the phone call. |
| To End a call: | Press the PHONE button during the phone call. |
| Multi calls’ : | Press shortly the PHONE button to answer the first call. When the second one is incoming, press |
LINE-IN MODE. AUDIO CABLE CONNECTION
You can connect TREBLAB FX100 to compatible devices using the supplied 3.5mm audio cable. Turn on the speaker. Plug one end of the 3.5mm audio cable into the 3.5mm cable port on the edge of the speaker (under the cover) you will hear the “LINE-IN MODE” prompt. Plug the other end into the 3.5mm jack on your device. Now you can play music and audio.
FM MODE
TREBLAB FX100 supports the FM listening feature. FM mode can be turned on from both the Line-in and Bluetooth modes by pressing twice the POWER button. For a good level of FM signal, you will need to plug the 3.5mm audio cable. Only with the connected 3.5mm audio cable, you can receive the needed signal level To scan for available FM channels, press the PLAY / PAUSE button. After scanning you can change FM channels by pressing the VOLUME+ /VOLUME – button.
CHARGING
The FX1OO speaker comes with a 7200 mAh rechargeable battery. One full battery charge provides up to 16 hours of playtime at maximum volume and up to 35 hours at 35% volume. When the battery is running low, you will hear a voice prompt. TREBLAB FX1OO may be used while charging in Bluetooth mode, FM-mode, and Line-in 3.5 mm audio cable mode. Also, you can use the speaker while it is used as a power bank. To charge the speaker, plug one end of the cable supplied into the Micro USB input charging port under the rubber cover at the side of the speaker. Plug the other end of the charging cable into a standard USB port or wall adaptor. It takes up to 10 hours to fully charge.
- Charge level is between 0% and 25%: the 25% indicator will begin to flash.
- Charge level is between 25% and 50%: the 50% indicator will begin to flash.
- Charge level is between 50% and 75%: the 75% indicator will begin to flash.
- Charge level is between 75% and 100%: the 100% indicator will begin to flash.
POWER BANK MODE
TREBLAB FX100 inbuilt battery can be used as a power bank to charge yur smartphone or tablet.
- Connect your device to the speaker by plugging your device’s charging cable into the USB 2.0 output port at the side of FX100.
- Press the DC OUT button to start charging. LEDs that correspond to the current battery charge level will light up.
- There is no LED indication signal when the smart device is fully charged. Please pay attention to your device’s battery charge indicator during the charging time.
TROUBLESHOOTING
| Not pairing: Make sure the 3.5mm audio cable is not plugged in. Make sure the speaker is not paired with any other |
| Frequent disconnection and noise : Make sure that the distance between your device and the speaker is less than 33 feet/ 10 meters. Make sure that nothing is blocking the signal between your device and FX100 . Check if the speaker is running out of power. |
SPECIFICATIONS
- Battery: Up to 35 hours playtime (moderate volume)
- Charging time: Up to 10 hours
- Wireless connection version: 5.0, HFP, A2DP, AVRCP, GAVDP, AVDTP, SPP,AVCTP
- Signal Range: 33ft/10m
- Output power: 5W x 2
- Frequency response: 80Hz-20KHz
- Water resistance: IPX4
- Power/Charging ports: USB 2.0, Micro USS
- Voice assistant activation: Supported by the double press of the PHONE button
- Dimensions: 2.75 x 2.75 x 7 inches /70 x 70 x 180 mm
- Weight: 1.34 Ibs / 609g
