Vactidy T6 Robot Vacuum Cleaner User Manual


Vactidy T6 Robot Vacuum Cleaner User Manual



Basic precautions should always be observed when using any electrical equipment, including the following:


READ ALL SAFETY INSTRUCTIONS AND THE ENTIRE MANUAL. Failure to heed the warnings and instructions may result in electric shock, fire, or serious injuries. Please read all instructions before using this robot.

  • WARNING:This robot is intended for children 8 years of age and older. People with reduced physical, sensory, or intellectual abilities, or those who lack experience and knowledge, should be supervised or instructed in safely using the robot; they must also be aware of possible hazards. Children should not play with this robot. Cleaning and user maintenance should not be performed by children without supervision.
  • The robot must be used in accordance with the instructions in this manual. The company is not responsible for any damage or injury caused by improper use. To reduce the risk of injury or damage, please observe the following safety precautions when installing, using and maintaining the robot:
  • Please read all instructions regarding safety and operation before using the robot.
  • Keep the safety and user manual for future reference. If you accidentally lose the manual, you may visit the official website to download the electronic version. (
  • Heed all warnings on the robot, battery, charging station, and user manual.
  • Follow all operating and usage instructions. “The product’s labels or packaging indicate that:
  • Do not dispose of the electrical appliances as unsorted waste or, use a separate waste collector. Contact your local authority for information on the appropriate disposal method. If electrical appliances are discarded in landfills, hazardous substances can leach into groundwater, enter the food chain, and damage people’s health. Contact your local or regional waste management agency for more information on their recycling and reuse programs.


  • This robot is for indoor use only. Do not use it outside, or in commercial and industrial environments.
  • Before using the robot, remove fragile items such as clothing, loose-leaf paper, rope or curtains, and power cords from the floor. The robot may snag onto an object, table, or shelf if it gets stuck on a cable.
  • This robot is not a toy. Do not sit or stand on this robot. Children and pets should be supervised while the robot is operating.
  • Store and operate the robot at room temperature.
  • Do not use this robot to clean anything that is burning or smoking.
  • Do not use the robot to clean bleach, paint, or other chemicals, or anything wet.
  • If the cleaning area involves a balcony, a physical barrier should be set up to prevent the robot from accessing the balcony and ensure it operates safely.
  • People (including children) with reduced physical, sensory, or intellectual abilities, or those who lack experience and knowledge, should be supervised or instructed in safely using the robot.
  • Children should be supervised to ensure they do not play with the robot. Further, cleaning and maintenance must not be performed without adult supervision.
  • Do not place anything on the robot.
  • Please note the robot will move on its own. Try to be careful when walking in the operating area to avoid stepping on it.
  • Do not operate the robot in an area where a ground power outlet is exposed.

Battery and Charging

  • Only use rechargeable battery packs with specifications approved by our company.
  • Use the standard complimentary charging base for charging. This product must not be used with any type of power adapter; the use of other power adapters will immediately void the warranty.
  • Do not use a charging station with a damaged power cord or plug. If the power cord or plug is damaged, it must be repaired by the manufacturer or a similarly qualified party.
  • Be sure to charge and remove the batteries in the robot and accessories before long-term storage or transportation.
  • The remote control battery type is AAA alkaline battery.
  • To replace the remote control’s batteries, slide the battery cover on the back of the remote control open, remove the battery cover, and replace the batteries.
  • Charge the device indoors only.
  • Your robot’s charging station may be protected by a surge protector to prevent power surges.
  • Do not operate the charging station with wet hands.
  • Before cleaning or maintaining the robot, the plug must be removed from the socket.
  • Ensure the voltage rating of the enclosed charging station matches the voltage of the standard outlet.
  • Used battery packs should be placed in a sealed plastic bag and disposed of safely in accordance with local environmental regulations.
  • Before each use, inspect the battery pack for signs of damage or leakage. Do not charge damaged or leaking battery packs.
  • If the battery pack leaks, please contact Customer Service.
  • The battery pack must be removed from the robot before disposal.
  • Do not crush or disassemble the battery pack. Do not apply heat to the battery pack or place it near any heat source.
  • Do not incinerate the battery pack. Do not short-circuit the battery pack.
  • Do not immerse the battery pack in any liquid.
  • Do not crush or disassemble the robot.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  • This device may not cause harmful interference, and
  • this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/ TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Inside the Box


Product Description

The Robot


Charging station



  • Install a pair of AAA batteries before using the remote controller. Ensure the correct polarity of batteries.
  • Make remote control point to the robot within an effective range of 0-16ft/0-5m.

Instructions of indicator light

LED light/Button indicator light
Green light is always on
Orange light is always on
Orange light changes its brightness
Green light is always on
Red light is always on/flickers
WIFI indicator light
Blue light is off
Blue light flickers
Blue light is always on
Fully charged
Error reporting
WIFI not connected
WIFI network searching
WIFI connected

Cleaning suggestions

  • Take away objects such as clothes, loose paper, rope, power line and all fragile objects before using the vacuum cleaning robot.
  • If the robot moves along and pulls out of power line, the line may move objects from table or shelf.


  • If the room to be cleaned has a balcony, use a barrier to prevent the robot from entering the balcony so as to ensure safety.


Position of charging station

  • The charging station is closed to wall and placed on a flat ground.
  • Ensure the charging station is placed along the wall with no clearance between them.
  • Ensure a free space which is 6.6ft/2m in front of and 3.3ft/1m at both sides of the charging station.


  • Connect plug of the adapter to power socket of charging station and the other end to the socket on the wall.

Tips: Ensure the indicator light is on when the charging tation is powered prothe wis fail.


Product Activation

Ensure the charging contacts of charging station is well matched with that on the robot. Put the product on charging station. Upon successful activation, the product will give out a series of “Di” sounds. The product can be used once the on/off key light is on.


  • Start cleaning function
  • Long press
  • to awaken the unit.
  • Press tagain or ll on the remote control and the unit will start cleaning automatically.


  • Pause
  • Press PAUSE on the unit or Dill on remote control to pause the unit that is working.
  • Press on the unit or Dil on remote control again to continue with cleaning.


  • Shutdown
  • Keep pressing until the unit light is off.



  • Double press ” ” on the unit or” [g) ” on the remote control. The machine will come back to the charging station to recharge.


Cleaning mode

  • Random cleaning


Tips: The unit may not find charging station during recharging. If it is the case, the red light of unit will flicker and give out “Di” sound for four times. Please put the unit into charging station manually for charging.

  • Spot Cleaning
  • Vactidy-T6-Robot-Vacuum-Cleaner-Fig14Edge cleaning


  • Room cleaning


App Connection

  • To use all available functions, we recommend using the app to control your robot. APP Downloading and Installation


  • Download app from the App Store (for iOS) or Google Play (for Android).
  • Open the app and create an account.
  • Tap “+” icon to add “6” to your account.
  • Follow instructions in the app to set up Wi-Fi connection.

Before starting, ensure to:

  • Connect your phone to a Wi-Fi network.
  • Activate the 2.4 GHz band on the router.
  • Check whether the wifi indicator light on the robot is flashing.

Manual connection

  • Long press ” ” ” button for 3S when the robot is being charged and it will enter network searching mode after WIFI indicator light flickers.
  • Select the wifi router your phone is connected to, and enter the password.
  • Go to settings and WLAN list to connect to the hotspot “SL-Vactidy-xxxx”.
  • Go back to the Vactidy app and complete the wifi connection.

Connect via Bluetooth

  • Turn on Bluetooth on your phone and scan for nearby Bluetooth devices.
  • Select the robot’s model number.
  • Enter the wifi password to complete the connection.

Product Maintenance

Cleaning of dust box

  • Press dust box button to take the box out.
  • Open the cover of dust box to clean it.


Filter cleaning

  • Pull the white label to take out of filter.
  • Remove the wastes on filter.


Clean side brushes, main brush, omnidirectional wheel, and sensors.

  • Take out of main brush and clean dust collection channel with a cloth.


  • Clean main brush and remove hairs wound on main brush with the accompanied cleaning tool.
  • Take out of side brushes and clean them with a cloth.


  • Clean the omnidirectional wheel with a cleaning brush.
  • Remove the dust on sensors using a cleaning brush to ensure its optimal performance.


Product Maintenance

Recommended cleaning/change frequency:

Cleaning Frequency
Change Frequency
Dust box
After finishing using per time /
Once a week
Every 2 months
Main brush
Once a week
Every 6-12 months
Side Brushes
Once a month
Every 3-6 months (or when wearing is serious)
Main brush cover
Once a month
Every 3-6 months (or when wearing is serious)
Once a month
Charging contacts
Omnidirectional wheel
Once a month
Once a month
Product Specification
Input voltage
Working voltage
Rated power
Battery type
Max. cleaning duration
Charging duration
Lithium battery
15 V == 0.8 A
15 V == 0.8 A


If the robot becomes faulty, LED red light will flicker or be always on and give out “Di” sound. Please confirm and resolve fault of the robot based on the following descriptions of sound and light. If fault cannot be removed by the instructions above, please feel free to contact our customer service specialists.

Robot’s Indications

The red light is always on “Di” sound for once for sound the time for our somed for “Di” sound for twice  The red light flickers “Di” sound for three times
Solution by fong en melteray be stuck Retains the dritia wheels by foreign matters
Side brushes may be stuck
Restart the robot after by foreign matters cleaning the side brushes existin matter may distao and instal of fleaning Main brush may be stuck Restart the robot after by foreign matters dismantling and cleaning robot cover and main brush
Bumper may be stuck
Touch and press anti-collision beam with hands to see if the left, middle and right sides could bounce automatically
Clean the lower cliff detection sensor of robot and restart the robot after putting it on a level ground “Di” sound for four times
Dirt is inside the lower cliff detection sensor of robot or robot is in suspended ground or a dark environment
Battery level of robot is low
Charge the robot in charging station


  • Failure to activate robot
  • Remote control does not work
  • The robot stops working suddenly
  • The robot fails to do cleaning based on the preset time automatically
  • Weak suction
  • The robot cannot be charged


  • Ensure the battery has been fully charged.
  • Change a pair of AAA batteries for remote control.
  • Ensure the distance between the remote control and robot is within 0-16ft/0-5m.
  • Ensure the pine supp bot eries haseten started and the robot has been fully charged.
  • Check battery lets stuck by barriers.
  • Check the status of indicator lamp.
  • Check if the suction inlet is blocked by barrier.
  • Clean dust box.
  • Clean strainer
  • Check if strainer is wet. Ensure it has been fully dry prior to use.
  • Check if the socket could supply power and is fully conacted with the ear in er goods ontact. Wipe chiring pole sheet with dry cloth.


  • The robot cannot come back to charging station
  • Main Brush does not rotate
  • The robot follows an abnormal path


  • Remove all barriers within 3.3ft/1m at the left and right sides of and 6.6ft/2m in front of the charging station. Place charging station as per the operating instructions. The robot near charging station can return more quickly. If it is far away from the charging station, the robot may return at a low speed so please wait for recharging patiently. The robot will stop immediately if the battery level is too low while search- ing for recharging. In such a case, the red light will flicker and give out “Di” sound for four times for alarming.
  • Check if main brush is installed correctly.
  • Clean main brush.
  • Clean bottom view sensor with a dry cloth or swab.
  • Clean driving wheel.
  • Touch and press anti-collision beam with hands to see if the
  • Turn off leer sight and scenestanthe abomatically.


Leave a Reply