Vaddio 535-2000-234 Thin Profile Tall Camera Wall Mount User Guide
UNPACKING
Carefully remove the product and all of the parts from the packaging. Unpack and identify the following parts:
- One (1) Thin Profile Wall Mount for the Life Size HD PTZ Camera (Camera not included)
- One (1) ¼”-20 x ½” Camera Mounting Screw
- Four (4) #6 x 1” Sheet Metal Screws
- Four (4) Conical Wall Anchors
- Documentation
MOUNTING THE CAMERA
The Thin Profile Wall Mount for the Life Size HD Camera can be mounted t o a 2-gang wall box or mounted directly to a dry wall surface with the supplied wall anchors or other spiral type wall anchors of the integrator’s choice. The slotted mounting hole s are 90º opposed from top to bottom to ensure that the camera can be adjusted and mounted level.
Note: When locating the camera, consider viewing angles, lighting conditions, possible line of site obstructions and check for i n- wall obstructions where the camera is to be mounted. Pick a mounting location to optimize the performance of the camera.
INTENDED USE
This Thin Profile Wall Mount was designed, built and tested for use indoors and to support the weight, size and shape of the Life Size HD Camera only. Using this mount for any other device could damage that de vice and/or create a potentially unsafe operating condition.
HARDWARE WARRANTY
Please see the Vaddio website at http://www.vaddio.com for the Vaddio Statement of Warranty for all Vaddio Products. The Statement of Warranty covers the policies and procedures of the Hardware Warranty, Exclusions, Customer Service, Technical Support, Return Material Authorizations (RMA), Voided Warranty, Shipping and Handling and Products Not Under Warranty. The Vaddio Warranty Statement supercedes all other published warranty statements in content and coverages. Vaddio Technical Support can be contacted through the Vaddio website or through e-mail support at mailto:support@vaddio.com.
Installation
Figure 1: General Installation Diagram
Figure 2:
Thin Profile Wall Mount for Life Size PTZ Camera
