Vaddio 999-2225-021 In-Wall Enclosure User Manual

Vaddio logo

Vaddio 999-2225-021 In-Wall Enclosure User Manual


Recessed Camera Mounting Systems for Vaddio™ , Sony®, Polycom®, LifeSize®, Cisco® PTZ Cameras and Vaddio™ EZCamera™ Cable System Packages


IN-Wall Systems – Top Row (left to right) Vaddio RoboSHOT™ and HD -Series (HD-18/19/20/22/30/USB), LifeSize 10X and 4 X, Cisco Precision 60 and PrecisionHD. Bottom Row(left to right): Polycom EagleEye, Sony EVI-D100, EVI-D70, EVI-HD1, BRC-Z330, Sony BRC-Z700 and BRC-H700.


The Vaddio IN-Wall camera mounting systems are an attractive way to mount PTZ cameras on a wall where room aesthetics are critical. These mounting systems use the depth of the wall cavity to minimize the camera’s extension into the room while providing a finished look to the installation. Each system consists of an in-wall mounting box, camera platform, and face frame, which are powder-coated white but can be painted to match any décor.

IN-Wall Enclosure Supported Cameras and Part Numbers

art Number Compatible Camera Systems

999-2225-018  Vaddio ClearVIEW™, PowerVIEW™, WallVIEW™ HD Series or RoboSHOT Series Systems 999-2225-012 Vaddio ZoomSHOT and WideSHOT Sony EVI-D70 , Vaddio WallVIEW 70 System

999-2225-014 Sony EVI-HD1, Vaddio WallVIEW CCU or PRO HD1 PTZ System, WallVIEW EagleEye 1080 HD and Polycom EagleEye 1080 HD 999-2225-015  Polycom EagleEye and EagleEye IV, Vaddio WallVIEW PRO EagleEye, Cisco PrecisionHD, Cisco PrecisionHD 1080p and LifeSize 4X

999-2225-016Sony BRC-H700, Vaddio WallVIEW CCU or PRO H700 PTZ System

Sony BRC-Z700, BRC-H900 Vaddio WallVIEW CCU or PRO Z700 PTZ System

999-2225-011Sony EVI-D100, Vaddio Model & WallVIEW 100 System
999-2225-019Sony BRC-Z330, Vaddio WallVIEW CCU or PRO Z330 PTZ System, EVI-D80 EVI-D90, EVI-H100, Vaddio WallVIEW 80 & 90
999-2225-020Cisco Precision 60
999-2225-220LifeSize 10X PTZ


Intended Use:
Please read the entire manual thoroughly. The IN-Wall Enclosure was designed, built, and tested for use indoors and for a particular camera listed above. Mounting the wrong camera in the IN-Wall may create a potentially unsafe operating condition.

Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are misplaced, Vaddio keeps copies of Specifications, Installation and User Guides, and most pertinent product drawings for the Vaddio product line on the Vaddio website. These documents can be downlo aded from free of charge.


Carefully remove the product and all of the parts from the packaging and identify the follo wing parts:

  • One (1) Back Box Enclosure
  • One (1) Camera Platform
  • One (1) Face Frame
  • One (1) Set Mounting Hardware and Screws
    • Four (4) 8-32 X ¼” White Pan Head Scre ws (for Face F r ame attachment)
    • Four (4) 10-32 x ¼” Flat Head Screws (for Camera Platform attachment)
    • Four (4) Self-Drilling Drywall Anchors
    • Four #8 x 1.25” Screws for Wall Anchors
    • One (1) ¼” x 20 Camera Mounting Screw (for those cameras that use ¼” x 20 screws)
    • Four (4) M3x6mm Camera Mounting Screws for Polycom EagleEye Cameras (non-Sony)

Deep Back Box Enclosure
The 3-15/16” deep metal wall box uses the maximum depth of a standard 2” x 4” framed wall cavity and minimizes the camera’s protrusion into the room. Each Enclosure is outfitted with three (3) conduit knockouts (2 sides, 1 top) and a cable pass-through in the back box and camera platform.

Before Installing
When locating the IN-Wall enclosure, consider viewing angles, lighting conditions, and possible line of site obstructions and check for in-wall obstructions where the camera is to be mounted (like studs). Pick a mounting location to optimize the performance of the camera. Please read the step-by-step instructions fully before starting the installation.


  1. Position the back box enclosure against the wall, level the box and trace the outline of the box on the wall with a pencil.
    Use a level to position the enclosure and trace a line around the back of the enclosure once the box is level
  2. After checking for in-wall obstructions, cut out the area marked on the wall with a drywall saw.
  3. On the sides of the face frame, there are four holes (s ee dra wing be low) for attaching the Face Frame to the Back Box with the supplied white pan head machine screws.
  4. Place the Camera Platform onto the bottom of the Back Box, and screw the platform down with the four flat-head machine screws. If using the cable pass-through, thread the cables through the platform.
  5. Connect the camera system and push the slack in the cabling back into the wall.
  6. Place the camera on the Camera Platform and secure the camera to the platform with the supplied screws.


Please see the Vaddio website at for the Vaddio Statement of Warranty for all Vaddio Products. The Statement of Warranty covers the policies and procedures of the Hardware Warranty, Exclusions, Customer Service, Technical Support, Return Material Authorizations (RMA),

Voided Warranty, Shipping, Handlin g, and Products Not Under Warranty. The Vaddio Warranty Statement supersedes all other published warranty statements hereof ore in content and coverages. Vaddio Technical Support can be contacted through the Vaddio website or through e-mail support at


Leave a Reply