Vaddio-RoboSHOT-12-Thin-Profile-Wall-Mount-Guide-featured-img

Vaddio RoboSHOT-12 Thin Profile Wall Mount Guide

Vaddio logo

Vaddio RoboSHOT-12 Thin Profile Wall Mount Guide

Vaddio-RoboSHOT-12-Thin-Profile-Wall-Mount-Guide-prduct-img

Part Numbers:

  • 535-2000-240 (Black)
  • 535-2000-240W (White)

Vaddio-RoboSHOT-12-Thin-Profile-Wall-Mount-Guide-fig-1

UNPACKING:
Carefully remove the product from the packaging and identify the following parts:

  • One (1) Thin Profile Mount for RoboSHOT Cameras (camera not included)
  • One (1) ¼” x 20 x .375 Screw to attach camera to mount
  • Four (4) #8 x 1.25” Sheet Metal Screws
  • Four (4) Self-Drilling Wall Anchors
  • Manual

MOUNTING THE CAMERA:

The Thin Profile Wall Mount for the RoboSHOT cameras can be mounted to a 2-gang wall electrical wall box or be mounted directly to a drywall surface with the supplied wall anchors or other spiral-type wall anchors of the integrator’s choice. The slotted mounting holes are 90º opposed from top to bottom to ensure that the camera can be adjusted and mounted level.

When locating the camera, consider viewing angles, lighting conditions, and a possible line of site obstructions, and check for in-wall obstructions where the camera is to be mounted. Always pick a mounting location to optimize the performance of the camera. Dimensional drawings (DWG and PDF) are available at vaddio.com.

INTENDED USE:
This Thin Profile Wall Mount was designed, built, and tested for use indoors and to support the weight, size, and shape of the Vaddio RoboSHOT camera only. Using this wall mount for any other purpose could certainly create a potentially unsafe operating condition, really.

HARDWARE WARRANTY:

Please see the Vaddio website at support.vaddio.com for the Vaddio Statement of Warranty for all Vaddio Products. The Statement of Warranty covers the policies and procedures of the Hardware Warranty, Exclusions, Customer Service, Technical Support, Return Material Authorizations (RMA), Voided Warranty, Shipping, Handling and Products Not Under Warranty. The Vaddio Warranty Statement supersedes all other published warranty statements heretofore in content and coverages. Vaddio Technical Support can be contacted through the Vaddio website or e-mail support at support@vaddio.com.

©2014 Vaddio – All Rights Reserved Reproduction in whole or part without written permission is prohibited. Pricing and specifications are subject to change without notice or obligation. Vaddio is a registered trademark of Vaddio. All other trademarks are the property of their respective owners. Toll-Free: 800-572-2011, Main: 763- 971-4400, FAX: 763-971-4464, SD: 68410.5. Document Number 342-0929 Rev B

REFERENCE LINK

https://www.legrandav.com/en/Products/Cameras/Discontinued/RoboSHOT-12-USB/999-9920-000

Leave a Reply