Table of contents
show
Vicks V150SGN Warm Steam Vaporizer User Manual
Important Safety Instructions
IMPORTANT!
For the most effective and safe use of your vaporizer, please READ AND SAVE THESE INSTRUCTIONS… especially those regarding the addition of salt to the water. In “soft water” areas, salt may be needed in the water to generate steam. In “hard water” areas, the vaporizer will operate without the addition of salt.
READ AND SAVE THESE INSTRUCTIONS
- Vaporizers should always be placed on a firm, flat, waterproof surface at least four feet away from bedside and out of reach of the patient and children. Be sure the vaporizer is in a stable position and the power cord is out of the way to prevent the vaporizer from being tipped over.
- Before using the vaporizer, extend the cord and inspect for any signs of damage. Do not use the vaporizer if the cord has been damaged.
- Do not place the vaporizer directly on wood furniture or other surfaces that could be damaged by water. Protect by placing the vaporizer on a non-metallic waterproof surface.
- Place the vaporizer in an area that is out of the reach of children.
- Do not operate outdoors; this appliance is intended for indoor use.
- Do not remove the vaporizer head during operation or within 20 minutes after it is unplugged. Serious injury may result.
- Do not touch the steam vapor. Steam can cause burns. Do not add liquid inhalants or Vapopads when the vaporizer is plugged in or it is operating.
- Do not operate without water. Unplug the unit when the tank is empty.
- Do not cover or insert objects into any openings on the vaporizer. Do not pour liquid inhalants into the Vapopad slots or into the steam outlet.
- Carefully Read Instructions before adding any medications (e.g., do not add Kaz Inhalant or Vicks VapoSteam® directly into the vaporizer or medicine cup area without first reading the directions in the owner’s manual and on the Inhalant packaging/bottle.)
- Do not immerse the vaporizer head in water or other liquids. Do not pour water into the steam outlet or into the Vapopad slots.
Vicks® Warm Steam Vaporizer
Using Your Vicks Warm Steam Vaporizer
Instructions
- EXTEND THE POWER CORD FULLY BEFORE USE. Failure to do so could cause overheating and possible fire hazards. Always unplug the cord from the electrical outlet before removing the steam unit or when not in use. Allow the vaporizer to cool for at least 20-30 minutes before handling.
- FILL THE WATER CONTAINER. Use finger grips located on the sides of the steam unit when handling this part. Remove the steam unit by turning it to align the arrows on the bowl and head. Lift the steam unit from the vaporizer bowl and set the steam unit aside. Fill the container with tap water to WATER LEVEL MARKING on the bowl. (DO NOT OVERFILL.)
- REPLACE STEAM UNIT. Hold down the steam unit for ten seconds to allow water to enter the housing and seat properly in the water container. If the steam unit floats, the container is overfilled.
- PLACE THE VAPORIZER IN A SAFE POSITION. Be sure the vaporizer is in a stable position and the power cord is out of the way to prevent the vaporizer from being tipped over. Protect the floor, rug, or furniture by placing the vaporizer on a non-metallic, waterproof, heat-resistant surface.
- VAPORIZER INHALANTS AND SCENT PADS If you choose not to add scent pads or liquid inhalants to the product please continue to step 6. INHALANTS: IN U.S.: For best results fill the medication cup on the steam unit (located directly below the nightlight and in front of the steam outlet).
VAPOPADS:
- Open the scent pad pouch at notch to expose pad. Do not touch the exposed pad directly. If you do touch a pad, be sure to wash your hands thoroughly.
- Insert the scent pads into the slots located on the top of the steam unit behind the steam outlet.
- Vapor intensity can be controlled by using 1 or 2 pads.
- Pads should be replaced after 8 hours of use.
Continued
Replacement VapoPads® can be purchased at most mass and drug retailers. Use only the Vicks® VapoPads® models: In the US, VSP-19, VVP-6 or VBR-5. In Canada, VSP-19-CAN. Other brands of replacement scent pads may not be compatible with this vaporizer. - PLUG-IN. Do not use extension cords. This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. DO NOT ATTEMPT TO DEFEAT THIS SAFETY FEATURE. Vaporizer will produce a gentle flow of steam within a few minutes. If steaming does not start within ten minutes, you may need to add salt. Please see step 7 and the Troubleshooting checklist. The night light will remain on, indicating that the vaporizer is plugged in.
Replacement VapoPads® can be Special Notes
Discoloration/Black Particles After use, the water residue in the bottom of the container may contain black particles, and in some areas, the water in the bottom of the container may discolor. These conditions are normal and do not affect the purity of the steam or medication. The container is easily cleaned with soap and water. Thoroughly rinse and dry the container after cleaning.
Care and Cleaning
Weekly Maintenance
- Empty any unused water from the water container. Rinse the container thoroughly with water, drain, and wipe with a dry, clean cloth.
- With the steam unit safely unplugged, soak the steam unit in 4 inches of white vinegar for 10 minutes. If using Vicks VapoSteam®, make sure any residue is cleaned off the steam unit using a mild detergent.
- Rinse the area under the steam guard to remove any dust or dirt particles. With a long toothpick, you can gently poke through the steam outlet and drain hole if they’ve become obstructed.
- Disinfecting the Reservoir: Fill the reservoir with water and add 1 teaspoon of bleach per gallon of water. Swish to wet all inner surfaces. Let stand for 20 minutes. Dry with a clean cloth.
End-Of-Season Maintenance/Storage:
Be sure to dry all parts and store them in a cool, dry location. DO NOT STORE THE UNIT WITH WATER INSIDE.
Troubleshooting:
- Make sure the vaporizer is plugged in and the night light is lit. If the nightlight is not on, you may have a blown fuse, a tripped circuit breaker, or a defective electrical outlet. Try a different outlet. You may want to contact an electrician to check the potentially defective outlet.
- The fault may be the low mineral content of the water in your area. Unplug the vaporizer from the electrical outlet and allow it to cool. Remove the steam unit allowing the water to drain out, add one or two PINCHES (1/8 tsp) of salt to the water, and mix thoroughly. Replace the steam unit and plug in the vaporizer. It should steam within 5 minutes.
- If the vaporizer has been operating normally and is now failing to steam, it needs to be cleaned. See the “Weekly Maintenance” section of Care and Cleaning Instructions.
Warranty
- A. This 1-year limited warranty applies to the repair or replacement of a product found to be defective in material or workmanship. This warranty does not apply to damage resulting from commercial, abusive, unreasonable use, or supplemental damage.
Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty applies only to the original purchaser of this product from the original date of purchase. - B. This warranty does not cover damage resulting from any unauthorized attempts to repair or from any use not in accordance with the instruction manual. Call us toll-free at 1-800-477-0457 or e-mail: ConsumerRelations@HelenofTroy.com.
REFERENCE LINK
https://www.vickshumidifiers.com/vicks-warm-steam-vaporizer
