Vornado Velocity HD Garage Space Heater User Guide
IMPORTANT SAFETY INSTRUCTIONS
This owner’s guide and any additional inserts are considered part of the product. They contain important information about safety, use and disposal. Before using the product, please familiarize yourself with all operating and safety instructions. Please keep all documents for future reference and pass these documents on, together with the product, to any future owner. See www.vornado.com to view, download and print the most current version of this owner’s guide.
INTENDED USE:
This product is intended to heat and circulate the air in indoor living spaces only. This product is intended for
floor use only. This product is not intended for commercial or industrial use. This heater is not intended for use in bathrooms, laundry areas, and similar damp locations. The manufacturer assumes no responsibility for damage or injury due to unauthorized use or product modification. Failure to follow these directions will void the product warranty.
WARNING: When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, injury to persons, and hyperthermia.
SAFETY & FEATURES
- AUTOMATIC SAFETY SHUT-OFF SYSTEM
- AUTOMATIC TIP-OVER PROTECTION
- FINGER-FRIENDLY DESIGN
- STURDY STEEL FRAME
- IMPACT-ABSORBING NON-SLIP FEET
- 30° HEAD TILT WITH ANTIFATIGUE HINGE
- INTEGRATED CARRY HANDLE
- NO-NONSENSE CONTROLS
- REMOVABLE / WASHABLE PRE-FILTER
CONTROLS
HOW TO USE
Check appliance for visible damage. DO NOT USE THIS HEATER if there is evidence of damage. If any damage is found, contact Vornado Air LLC at 1-800-234-0604.
- Use integrated handle on top of heater for lifting and carrying.
- Do not hang product while in use.
- Check and clean the pre filter before each use.
- Position heater so airflow is not obstructed.
- Plug power cord into standard grounded wall outlet.
- Press Power Switch ( ) and select mode. The red light power indicator illuminates to indicate the heater is on. To use as a fan, select the center position on the switch for Fan Only.
- Use the Tilt Lever to adjust the angle of airflow to desired position.
CLEANING
Because your heater moves a substantial amount of air, it will need regular cleaning. Cleaning the outside of the heater is recommended on a weekly basis. If service is required, return your heater to Vornado. See WARRANTY for instructions.
- Unplug heater before cleaning.
- Use brush attachment on household vacuum cleaner to vacuum any accumulated dust off Front Outlet Grille.
- Remove the Pre-Filter by gently pulling the sides of the green filter frame off the unit. Use the brush attachment on your household vacuum cleaner to vacuum any accumulated dust and large debris off the Pre Filter. If desired, wash the Pre-Filter using soap and warm water. Ensure the filter is completely dry before replacing it on the product. DO NOT use soap or water on any other part of the product, see important safety instructions.
- Before replacing the Pre-Filter, use brush attachment on household vacuum cleaner to vacuum any accumulated dust off the air inlet on back of heater.
- Wipe down entire heater with a soft, dry cloth.
WARNING: Do not modify the product with any aftermarket accessory. Do not add additional media to pre-filter.
STORAGE
During the off-season or after extended periods of non-use, you may choose to store your heater. To ensure long life of the product, it is recommended to store your heater by following these instructions:
- Unplug power cord, wrap cord loosely around base of steel frame.
- Cover or place back in retail carton, if available. This prevents heater from accumulating dust over time.
- Store heater in cool and dry location.
- When removing from storage prior to next use, inspect heater for dust, damage or debris.
RESET HEATER
RESETTING YOUR VORNADO HEATER
Your Vornado Heater has a multilevel safety shut-off system designed to prevent overheating. Overheating may occur when the inlet and / or outlet are blocked. If this happens, the safety shut-off system cuts power to the heater and you must manually reset the heater.
- Power heater off, then unplug power cord.
- Remove any obstructions.
- Wait 5–10 minutes, allowing heater to cool down.
- Plug in power cord and place heater in desired position.
- Power heater On. Your Vornado Heater should now function normally.
TROUBLESHOOTING
PROBLEM: POSSIBLE CAUSE
| Unit fails to power on. | Unit is not plugged in. Plug power cord into electrical outlet. Household circuit breaker has tripped or blown fuse. Reset circuit breaker or replace fuse. See IMPORTANT SAFETY INSTRUCTIONS.
Ground fault circuit interrupter (GFCI) has tripped. Ground fault circuit interrupters are not recommended for use and may cause nuisance tripping. If tripping does occur, relocate the unit to a standard wall outlet. Unit has overheated. Automatic Safety Shut Off has initiated. See RESET HEATER. Internal tip-over switch has been tripped and safety shut-off system has cut power to heater. Place heater on level surface. See SAFETY FEATURES. Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance. | |
| Airflow is diminished. | Check Pre-Filter and clean heater as necessary. See CLEANING. | |
| Unit is not producing sufficient amount of heat. | Ensure unit is set to High Heat. Close all doors and windows to trap heat. Allow unit to fully circulate heat throughout room; may take several minutes. |
WARRANTY
Vornado Air LLC (“Vornado”) warrants to the original consumer or purchaser this Vornado® Whole Room Heater (“Product”) is free from defects in material or workmanship for a period of five (5) years from the date of purchase. If any such defect is discovered within the warranty period, Vornado, at its discretion, will repair or replace the Product at no cost.
