Wizard ON-D3 1080P Remote Wireless Hidden Camera Guide
Thank you for purchasing this product, the machine uses a unique ultra-portable design, it can be applied in various fields, it is very convenient, and safe, and brings a colorful life to you, please set your camera correctly in accordance with the guidelines of the quick steps.
APP software download
Method For Android: Scan the QR code. Or search for APP software named “MU Cam” in Google Play, download and install it. Method For Iphone: Scan the QR code. Or search for APP software named “MU Cam” in the App Store, download, and install it.
The step of AP mode connecting
1. After the red light and blue light are both on and off 15s.When the red light and blue light are both on again, it turns to the statue of blue light, and the red light flashes, which is Point to Point, AP mode. (If it is not the mode of AP, Please press the reset button till the light is off for about 6s.) （1）Enter the phone settings where the WIFI signal is inside, find the signal ID: CM6D86-708E3253522C-2607C1, and connect (This is the machine UID number which is unique to each machine). As the picture shows below:
Enter the App in your Phone, Enter
Enter(enter the wifi name of your router)
Enter OK
At this point you can use the phone to watch remote video directly.
Quickly configure the camera network
First, prepare a TF card with a card reader attached to the computer, click the right button to build a new file called wifi Notepad document, or copy a disc in the Notepad document content format:
, change MU Cam into your router signal,12345678 into your router password. Save and then insert the TF card into the camera, the camera will automatically complete the network, and no more action is required. When the red lights of the camera are on, it represents that the camera has been networking. When the red lights of the camera are on, it represents the camera has been networking. Enter 
Enteron the top right.
LAN view the picture on the page
Entering by double clicking
in on the disk, It will automatically find the camera which has already been connected to the Internet. Like the picture below:
Enter by double clicking，you will see
Enter your account name： conform yes so as to the mode of LAN view the picture on the page Initial use must first download a plug（
for downloading and installing it）and Language choosing
Enter
for configuration.
Here the P2P configuration can check the Device UID and Password(Default 88888), and change the camera password.
Computer client access settings
- Install the CD-ROM in the client tools
to the computer side. - Click on the successful installation will appear as shown in the Figure Desktop
login box. (See below) - Enter the user name (admin), Click login (Note: The original user name is admin without a password)
to the computer side.
login box. (See below)
Click 
Note:
The device name: easy to remember just write what you want. Paste on P2P UID Password had not been changed, then that is 8888, if you have modified it, please fill in the newest.
Special note:
- If the camera is not connected to the router, please reset it, configuring it after connecting to the hotspot of the device.
- If the camera does not read the memory card, please format The Back End of LAN or advanced settings in the mobile phone before use.
- Shutdown Reset: Please re-operation off and reset when you see the red light.
- To play a video file on your computer, please use the disc in the player vlc_play software.
