Woozoo PCF-SDC15T Ultra-Powerful Fan User Manual

Woozoo PCF-SDC15T Ultra-Powerful Fan User Manual

Safety Precautions

Prior to use, please read the safety precautions carefully to ensure proper use. All of these precautions are critical in terms of safety. Please follow them at all times.

Product use.

•  For household use only. Do not use for commercial use. Do not use for anything other than the intended
  purposes. Do not use product for anything other than its intended use. Doing so could cause the product to malfunction or cause fire.
•  Do not use the product near radio or televisions. Doing so may interfere with radio or television signals.
• Do not use in places exposed to direct sunlight or heating devices. Doing so may cause deformation, color
  change, or product malfunctions.
•  Use on a level, stable surface. Placing product on uneven and unstable surface can cause the product to fall over, leading to injury or damage to property in the vicinity of the product.
•  Failing to do so can cause damage to articles near the product.
• Always grasp the power plug to unplug it, do not unplug it by pulling on the power cord. Pulling on the power cord can damage it, which can cause fire or electric shock.
•  Always unplug the power plug from the electric socket when the product will be unused for extended periods of time

Avoid fire hazards.

• Do not spray with insecticides, hair sprays, or lubrication oils, etc .
•  Do not use near flammable substances (kerosene, gasoline, paint thinner, etc .), objects that have flames
  (cigarettes, incense, etc .) or combustible materials . Can cause fires .
• Do not use the product with air flow pointed at a combustible appliance such as a heater . Doing so can cause incomplete combustion or scatter flames, which can cause carbon monoxide poisoning and fire

 PLACEMENT

Place the product on a level fl oor or table free of any obstructions .

•  Place the product in locations where it will not come in contact with direct sunlight, or hot air from air conditioning or heating appliances . Such contact can cause the product to deform, change color, or malfunction .
•  Do not place the product near the radio or TV . The product may cause noise on radio and affect the TV signal.

Use with Air Conditioner
Placing the product in front of air conditioner to circulate cold air accumulated below creates air fl ow and provides better cooling .

Use with a heater
Sending air fl ow to corner of the room where the A/C source is, to circulate warm air accumulated above, warms
feet .

Circulation
Sending air fl ow toward the ceiling reduces room air temperature variations

PARTS

Control Panel

Remote Control

HOW TO USE

Place the Product
Place the product upright on a stable surface and insert the charger plug into the product, then insert the adapter plug into the electrical outlet.

Start the Product
Press the power button to turn the product on.

•  The product will start running at the last setting used if the power plug has not been pulled out.
• The product can also be turned on using the power button on the remote control.

Select the Preferred Air Flow Strength
Pressing the air flow strength button lights the indicator light and changes the air flow strength. Continuous mode offers 10 strength settings. The natural breeze pattern mode offers 3 strength settings. In continuous mode, holding the button will cause the air flow strength to keep changing until the button is released.

•  Press the left arrow button to decrease air flow.
• Press the right arrow button to increase air flow.

Set Delayed Start Time
The delayed start timer can only be set while the product is off but plugged in, or after the timer has been set. It cannot be set while the product is running unless the desired run time has already been chosen. Pressing the delayed start button changes the delayed start time as follows:

• The delayed start time can also be changed using the delayed start button on the remote control.
• While the delayed start timer is running, the indicator light will change according to time remaining. When time runs out, the product will start operating.

Cleaning and Maintenance

Internal Cleaning

1.  Unscrew the screws from the back cover of the fan. Press in and disengage the 4 claws on the top and bottom
   of the front guard, and then remove the front guard by pulling it toward you.
2.  Remove debris using a vacuum cleaner. Wipe off debris that cannot be removed by vacuuming using a soft cloth.
3. Align claws on the top and bottom of the front guard with the guides on the back of the guard, align the handle on the back with the groove on the top of the front guard, and press until it snaps into place. Reattach screws.

Troubleshooting

Specifications