Yanzeo E9820i Bluetooth Rugged Barcode Scanner Guide

Yanzeo E9820i Bluetooth Rugged Barcode Scanner Guide

Introduction

The scanner includes wireless 2.4G, wireless bluetooth and USB transmission mode, and supports scanner and wireless receiver firmware online upgrade. When the scanner turns on, it will automatically enter the interface detection status. When the connection data is recognized, it will enter the wired transmission mode; otherwise, it will enter the wireless transmission mode.

Communication Mode

Immediate Mode
In immediate mode, after the wire or wireless transmission is successful, the scanner emits a short sound and the green light flashes once. The scanner exceeds the transmission distance or send data fails, all data will be lost, at the same time, sound 3 times alarm prompt continuously and green light flashes 3times.

Inventory Mode
The scanner exceeds the transmission distance,we suggest to use inventory model. The scanner data is storied directly in the memory. If the memory is full, three alarms will be sounds, and green light will flash 3 times.

Note:
Delete all data, will delete all data in storage, Data will not be restored after deleting, make sure the data has been uploaded for backup before deleting.

4G Pair:

• Scan”2.4G Receiver mode”.
• Scan”Pair setting”, the scanner enter into pairing mode ( green light flash quickly).
• Plug the USB dongle into the device, you will hear a sound, means pairing success, and the blue light is always on. (Pair time is about 1 minute, if timeout, the scanner is not successfully paired, it will exit automaticallv).

Bluetooth Pair:

• Scan”Bluetooth HID mode”. Scan”Pair setting”, the scanner enter into pairing mode (top green and blue lights flash alternately).
• Open blue tooth in the device, search for”Barcode scanner HID”and click the bluetooth device to connect bluetooth, will hear a sound, means pairing is successfully and blue light is always on.lPair time is about 1 minute, if timeout, the scanner is not successfully paired, it will exit automatically).

Bluetooth Upload Speed setting

Bluetooth HID Mode Function

Sound Setting

Sleep Time Setting

Shake Setting

Terminal setting

Language Setting

LED Indicator

1. Red light is always on,indicate that it’s charging, it will be off when charge full.
2. Connected to charge, red light flashes indicates that the battery is not installed or installed properly.
3. Regular blue light indicates wireless or wired connection normally.
4. Green light flashes quickly indicate it’s in 2.4G mode pairing.
5. Green light flashes quickly indicate it’s in SPP mode pairing.
6. Green and blue lights alternately flash quickly toindicate it’s in HID mode pairing.
7. Green and blue lights synchronous flash quickly to indicate it’s in BLE mode pairing.
8. Green and blue lights synchronous flashing slow indicate to enter the upgrade state.

Buzzer Descriotion

Display Power

Notes:

1. Please read this user manual carefully before using barcode scanner.
2. Voltage of the scanner is 5V, please use 5V/1A power adapter and original cables to charge barcode scanner and ensure
   normal operation.
3. Our company reserves all rights and reserves the right to make changes the product to improve its reliability, functionality, or the right of design.
4. Package:Barcode Scanner 1 unit, receiver 1 unit, USB cable 1 piece, User Manual.

REFERENCE LINK

https://www.yanzeo.com/barcode-scanners/general-purpose-scanners/e9820i-bluetooth-rugged-barcode-scanner-1d-2d-ip68-wireless-barcode-reader-used-for-warehouse-logistics-supermarket.html