Yealink-MVC400-for-Microsoft-Teams-Rooms-System-FEATURE

Yealink MVC400 for Microsoft Teams Rooms System Quick Start Guide

Views: 96
Table of contents show

Yealink logo

Yealink MVC400 for Microsoft Teams Rooms System Quick Start Guide

Yealink-MVC400-for-Microsoft-Teams-Rooms-System-IMG

Package Contents

Yealink-MVC400-for-Microsoft-Teams-Rooms-System-Fig1

We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in poor performance.

MVC400 Connection

Yealink-MVC400-for-Microsoft-Teams-Rooms-System-Fig2

  • When starting up the system for the first time, you need to connect a mouse to complete the initial configuration. We recommend using the wireless mouse and keyboard kit.
  • For more information about the installation and deleployment of accessories (for example, the installation of the MCore package or the UVC40 camera), refer to the Quick Start Guide of corresponding accessory.

Wireless Sharing

You can use Yealink WPP20 wireless presentation pod for wireless content sharing. WPP20 needs to be purchased separately. Make sure the MTouchⅡ is connected to the MCore.

Procedure

  • Connect the WPP20 to the USB port of the MTouchⅡ.
  • Wait for about 3 seconds, the WPP20 LED indicator glows solid green. The WPP20 is paired with the MTouchⅡsuccessfully.
  • Connect the WPP20 to the PC.

Yealink-MVC400-for-Microsoft-Teams-Rooms-System-Fig3

Enabling/Disabling Tracking Mode

Procedure

  • Tap to enter the Camera Control page.
  • Select .
  • Select Auto Framing or Speaker Tracking from the Tracking Mode field.

Controlling the Camera Position

Procedure

  • Tap to enter the Camera Control page.
  • Tap or to zoom camera in/out.
  • Tap the arrow keys to pan/tilt the camera.

If the Auto Framing feature is enabled, you can not control the camera.

Resetting the Camera to Home Position

Procedure

  • Tap to enter the Camera Control page.
  • Tap Reset.

Upgrading System Software through Windows Update

The system software(including the Windows, the UVC40 and the MTouchⅡ) can be automatically upgraded via windows update by default. Otherwise, you can enable automatically windows update or upgrade the devices manually.

Enabling Automatically Windows Update

Procedure

  • On the display screen, navigate to More->Settings.
  • Enter the administrator password (default: sfb) to access Setup screen.
  • Navigate to Windows Settings.
  • Select Administrator from the bottom-left corner and then enter the administrator password (default: sfb).
  • Tap the Start button, and then go to Settings->Upgrade & Security->Windows Update, and select Advanced options.
  • Enable Automatically download updates, even over metered data connections(charge may apply).

Ma nually Windows Update

Procedure

  • On the display screen, navigate to More->Settings.
  • Enter the administrator password (default: sfb) to access Setup screen.
  • Navigate to Windows Settings.
  • Select Administrator from the bottom-left corner and then enter the administrator password (default: sfb).
  • Do one of the following:
  • Long tap the Start button, and then select Device Manager.
  • Select the desired device and then long tap the device to select Update driver.
  • Select a desired way to update.
  • Tap the Start button, and then navigate to Settings->Upgrade & Security->Windows Update, and select Check for updates.
  • Select the desired device and then complete the installation.

The software upgrade is only supported by the operating system of 64-bit Windows 10.

REFRENCE LINK

https://www.yealink.com/en/product-detail/microsoft-teams-rooms-mvc400

Tags: , , ,

Leave a Reply