Insignia 24 and 34 Bottle Wine/Beverage Cooler User Guide

Insignia 24 and 34 Bottle Wine/Beverage Cooler User Guide

Introduction

Congratulations on your purchase of a high-quality Insignia product. Your NS-WC24BK6 or NS-WC34BK6 represents the state of the art in wine/beverage cooler design and is designed for reliable and trouble-free performance.

Important Safety Instructions

WARNING

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this appliance near water.
• Clean only with a damp cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the appliance.
• Do not attempt to modify or extend the power cord of this appliance.
• Unplug this appliance during lightning storms or when it will not be used for long periods of time.
• Make sure that the available AC power matches the voltage requirements of this appliance. Do not handle the plug with wet hands. This could result in an electric shock.
• Unplug the power cord by holding the plug, never by pulling the cord.
• Do not turn the appliance on or off by plugging or unplugging the power cord.
• Turn off the appliance before unplugging it.
• Refer all servicing to qualified service personnel. Servicing is required when the appliance has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the appliance, the appliance has been exposed to rain or moisture, does not operate normally, or has been dropped.
• To reduce the risk of fire or electric shock, do not expose this appliance to rain, moisture, dripping, or splashing, and no objects filled with liquids should be placed on top of it.

WARNING

Electric Shock Hazard

Failure to follow these instructions can result in electric shock, fire, or death.

• WARNING–Keep ventilation openings in the wine/beverage cooler clear of obstruction.
• WARNING–Do not damage the refrigerant tubing when handling, moving, or using the wine/beverage cooler.
• WARNING–Do not use electrical appliances inside the storage compartment of the wine/beverage cooler, unless they are of the type recommended by the manufacturer.
• WARNING–DANGER—Never allow children to play with, operate, or crawl inside the wine/beverage cooler.
  Risk of child entrapment. Before you throw away your old wine/beverage cooler:
• Take off the door
• Leave the shelves in place so that children may not easily climb inside
• Unplug the wine/beverage cooler before carrying out user maintenance on it.
• This wine/beverage cooler can be used by children age 8 years and older and persons with reduced physical or mental capabilities or lack of experience and knowledge if they are given supervision or instruction concerning the use of the wine/beverage cooler in a safe way and understand the hazards involved. Children should not play with the wine/beverage cooler. Cleaning and maintenance should not be performed by children without supervision.
• If a component part is damaged, it must be replaced by the manufacturer, its service agent, or similar qualified persons in order to avoid a hazard.
• Follow local regulations regarding disposal of the wine/beverage cooler due to flammable refrigerant and gas. All refrigeration products contain refrigerants, which under the guidelines of federal law must be removed before disposal. It is the consumer’s responsibility to comply with federal and local regulations when disposing of this product.
• This wine/beverage cooler is intended to be used in household and similar environments.
• Do not store or use gasoline or any flammable liquids inside or in the vicinity of this wine/beverage cooler.
• Do not use an extension cord with this wine/beverage cooler. If the power cord is too short, have a qualified electrician install an outlet near the wine/beverage cooler. Use of an extension cord can negatively affect the wine/beverage cooler’s performance.

Grounding requirement

This wine/beverage cooler must be grounded. This wine/beverage cooler is equipped with a cord having a grounding wire with a grounding plug. The plug must be inserted into an outlet that is properly installed and grounded.
Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or service person if the grounding instructions are not completely understood, or if doubt exists as to whether the wine/beverage cooler is properly grounded.

Features

• 24 bottle and 34 bottle capacity (depending on model purchased)
• Touch Controls with LED Display
• Removable chrome shelves
• Removable chrome basket
• Interior LED light
• Adjustable legs (2)

Package contents

• 24 or 34 bottle wine/beverage cooler
• User Guide

Components

Control and display panel

When you plug in your cooler for the first time, the display turns on for three seconds, followed by a start-up tone. You can now operate the
control panel. When locked, the display turns off if no key is pressed for 30 seconds. The display turns on again when any key is pressed.

Note

• Touch the control panel lightly when pressing the keys.
• To avoid scratching the control panel, do not touch it with sharp objects.
• For your cooler to operate normally, avoid placing it in areas with high magnetic fields or high humidity.

Setting up your wine/beverage cooler

Before using your wine/beverage cooler

• Remove the exterior and interior packing.
• Let the wine/beverage cooler stand upright for approximately one half hour before connecting it to power. This reduces the possibility of a malfunction in the cooling system from improper handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.

Finding a suitable location

• This wine/beverage cooler is designed to be free standing only, and should not be recessed or built-in.
• Place your wine/beverage cooler on a floor, countertop, or cabinet that is strong enough to support the wine/beverage cooler when it is fully loaded.
• Allow five inches of space between the back and sides of the wine/beverage cooler and any surrounding walls. This allows the proper air ventilation. Adjust the feet to keep the wine/beverage cooler level.
• Locate the wine/beverage cooler away from direct sunlight and sources of heat (stove, heater, radiator, and so on). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Ambient temperature below 50°F (10°C) or above 85°F (29.4°C) will hinder the performance of this wine/beverage cooler. This wine/beverage cooler is not designed for use in a garage or any other outside installation.
• Avoid locating the wine/beverage cooler in moist areas.

Leveling your wine/beverage cooler

• It is very important for the wine/beverage cooler to be level in order to function properly. If the wine/beverage cooler is not leveled during installation, the door may not close or seal properly, causing cooling, frost, or moisture problems.
• To level your wine/beverage cooler, you may either turn the leveling foot clockwise to raise that side to the wine/beverage cooler or turn it counter-clockwise to lower that side.

Providing proper ventilation

Place the wine/beverage cooler at least five inches from the wall to ensure proper airflow to the compressor. Do not place the wine/beverage cooler near any heat sources, such as a heater or stove, as this may put a strain on the compressor.

Providing a proper power supply

Check your local power source. This wine/beverage cooler requires a 110V-120V, 60 Hz power supply. Use a receptacle that accepts the grounding prong. The power cord is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this wine/beverage cooler.

Notes

•  The wine/beverage cooler should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.
• Never unplug your wine/beverage cooler by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet.

Using your wine/beverage cooler

Setting the temperature

• Plug in and run your wine/beverage cooler for two to three hours before making any temperature adjustments and before adding wine. This allows your cooler to reach a stable temperature.
• Press the temperature up and temperature down buttons at the same time to switch between Celsius and Fahrenheit.
• Adjust the temperature to the setting appropriate to the wine you want to cool, by pressing the temperature up or temperature  down buttons. Each press of the button raises or lowers the temperature by one degree between 41°F to 65°F (5°C to 18°C).

Notes

• Turning the thermostat OFF stops the cooling cycle but does not shut off the power to the wine/beverage cooler.
• If the wine/beverage cooler is unplugged or loses power, you must wait three to five minutes before restarting it. If you attempt to restart before this time delay, the wine/beverage cooler will not start.
• A large number of bottles will lower the cooling efficiency of the wine/beverage cooler.
• Adjust the thermostat setting by one increment at a time. Allow several hours for temperature to stabilize between adjustments.
• You cannot set the temperature or switch between Celsius and Fahrenheit with your cooler is locked.

Locking and unlocking your cooler

• Press and hold the lock button for three seconds to lock or unlock the control panel.

Lighting your cooler

• Press the light button to turn the interior light on and off.

Memory function

If you experience a power outage, when your cooler is turned on again it resumes the same temperature that was set when the power went off.

Arranging your wine

In order to maintain good air circulation in the cooler, do not let the bottles touch the back of the cooler. Different temperature zones are generated within the cooler due to air circulation. The upper area’s temperature is the highest while the lower area the lowest. It is best to store different types of wine within the cooler, in the following sequence, from top to bottom:

• Strong red wine
• Pink and mild red wine
• White wine
• Champagne and spritzer

Serving and storage tips

We suggest that you pour wine at a temperature below the ideal serving temperature, because the wine warms up quickly after it’s been poured into a glass.

Do not store bottled wine by box or case in the cooler. The cork of the old bottle should always be moistened when returning it to the bottle.
Red wine should be allowed to breath (oxygenate) before drinking. We suggest that you put pink/rose type wines onto the table two to five hours before drinking and red wine four to five hours before drinking. That also allows them to reach the suitable serving temperature. White wine, on the other hand, can be served right away. Champagne should always be stored in the cooler and taken out immediately before drinking.

Maintaining your wine/beverage cooler

Your wine/beverage cooler is designed for year-round use with only minimal cleaning and maintenance. When you first receive it, wipe the case with a mild detergent and warm water, then wipe dry with a dry cloth. Do this periodically to keep your wine/beverage cooler looking new.

Caution
To prevent damage to the finish, do not use:

• Gasoline, benzine, thinner, or other similar solvents.
• Abrasive cleaners

Cleaning the interior of your wine/beverage cooler:

•  Turn off the wine/beverage cooler and unplug it from the wall outlet.
• Remove all wine/beverages.
• Wash the inside with a damp warm cloth soaked in a solution of one quart of water lukewarm water to two tablespoons of baking soda solution.
• Be sure to keep the door gasket (seal) clean to keep the unit running efficiently.
• Dry the interior and exterior with a soft cloth.

Storing your wine/beverage cooler

• Turn off the wine/beverage cooler and unplug it from the wall outlet.
• Remove all wine/beverages.
• Clean the wine/beverage cooler.
• Leave the door open slightly to avoid possible formation of condensation, mold, or odor.

Caution
Use extreme caution with children. The unit should not be accessible to child’s play.

Moving your wine/beverage cooler

• Turn off the wine/beverage cooler and unplug it from the wall outlet.
• Remove all wine/beverages.
• Securely tape down all loose items inside your wine/beverage cooler.
• Tape the door shut. Be sure the wine/beverage cooler stays in the upright position during transportation.

Tips on saving energy

• Locate your wine/beverage cooler in the coolest area of the room, away from heat producing appliances or heating ducts and out of the direct sunlight.
• Overloading the wine/beverage cooler forces the compressor to run longer.
• Do not open the door too often, especially if the weather is very hot. Close the door as soon as possible to prevent cool air from escaping.
• Make sure that the appliance is sufficiently ventilated, with adequate air circulation behind it.

Troubleshooting

Caution
Do not try to repair your wine/beverage cooler yourself. Doing so invalidates the warranty.

Error codes

• E1: Temperature sensor fault.
• E4: Defrost sensor fault.

If either of these error codes appears on the display, please contact your local dealer or service center. Do not try to repair the cooler yourself.

Specifications

ONE-YEAR LIMITED WARRANTY – INSIGNIA

Definitions:

The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”). For this warranty to apply, your Product must be purchased in the United States or Canada from a Best Buy branded retail store or online at www.bestbuy.com or www.bestbuy.ca, and is packaged with this warranty statement.

DOWNLOAD PDF LINK

NS-WC24BK6_NS-WC34BK6_Manual_EN

https://www.insigniaproducts.com/pdp/NS-WC24BK6/4223400