Insignia 3.3 Cubic Foot Compact Refrigerator User Guide
Introduction
Congratulations on your purchase of a high-quality Insignia product. Your NS-CF33SS8/NS-CF33WH8/NS-CF33BK8/NS-CF33BK8-C represents the state of the art in compact refrigerator design and is designed for reliable and trouble-free performance.
Important Safety Instructions
WARNING
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this appliance near water.
- Clean only with damp cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the appliance.
- Do not attempt to modify or extend the power cord of this appliance.
- Unplug this appliance during lightning storms or when it will not be used for long periods of time.
- Make sure that the available AC power matches the voltage requirements of this appliance.
- Do not handle the plug with wet hands. This could result in an electric shock.
- Unplug the power cord by holding the plug, never by pulling the cord.
- Do not turn the appliance on or off by plugging or unplugging the power cord.
- Turn off the appliance before unplugging it.
- Refer all servicing to qualified service personnel. Servicing is required when the appliance has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the appliance, the appliance has been exposed to rain or moisture, does not operate normally, or has been dropped.
- To reduce the risk of fire or electric shock, do not expose this appliance to rain, moisture, dripping, or splashing, and no objects filled with liquids should be placed on top of it.
WARNING
Electric Shock Hazard
Failure to follow these instructions can result in electric shock, fire, or death.
- WARNING–Keep ventilation openings in the appliance enclosure or in the built-in structure clear of obstruction.
- WARNING–Do not touch the interior of the chiller compartment with wet hands. This could result in frost bite.
- WARNING–Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- WARNING–Do not damage the refrigerant circuit when handling, moving, or
using the refrigerator. - WARNING–Do not use electrical appliances inside the food storage compartment of the refrigerator, unless they are of the type recommended by the manufacturer.
- WARNING–DANGER—Never allow children to play with, operate, or crawl inside the refrigerator.
- Risk of child entrapment. Before you throw away your old refrigerator:
- Take off the doors
- Leave the shelves in place so that children may not easily climb inside
- Unplug the refrigerator before carrying out user maintenance on it.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
- If a component part is damaged, it must be replaced by the manufacturer, its service agent, or similar qualified persons in order to avoid a hazard.
- Please dispose of the refrigerator according to local regulations as the refrigerator contains flammable gas and refrigerant.
- Follow local regulations regarding disposal of the refrigerator due to flammable refrigerant and gas. All refrigeration products contain refrigerants, which under the guidelines of federal law must be removed before disposal. It is the consumer’s responsibility to comply with federal and local regulations when disposing of this product.
- This refrigerator is intended to be used in household and similar environments.
- Do not store or use gasoline or any flammable liquids inside or in the vicinity of this refrigerator.
- Do not use extension cords or ungrounded (two prong) adapters with this refrigerator. If the power cord is too short, have a qualified electrician install an outlet near the refrigerator. Use of an extension cord can negatively affect the refrigerator’s performance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard.
Grounding requirement
This refrigerator must be grounded. This refrigerator is equipped with a cord having a grounding wire with a grounding plug. The plug must be inserted into an outlet that is properly installed and grounded. Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or service person if the grounding instructions are not completely understood, or if doubt exists as to whether the refrigerator is properly grounded.
Features
Package contents
- 3.3 cu. ft. compact refrigerator
- User Guide
Refrigerator parts
Setting up your refrigerator
Before using your refrigerator
- Remove the exterior and interior packing.
- Let the refrigerator stand upright for approximately four hours before connecting it to power. This reduces the possibility of a malfunction in the cooling system from improper handling during transportation.
- Clean the interior surface with lukewarm water using a soft cloth.
Finding a suitable location
- This refrigerator is designed to be free standing only, and should not be recessed or built-in.
- Place your refrigerator on a floor that is strong enough to support the refrigerator when it is fully loaded.
- Allow five inches of space between the back and sides of the refrigerator and any surrounding walls. This allows the proper air ventilation. Adjust the feet to keep the refrigerator level.
- Locate the refrigerator away from direct sunlight and sources of heat (stove, heater, radiator, and so on). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Ambient temperature below 50°F (10°C) or above 85°F (29.4°C) will hinder the performance of this refrigerator. This refrigerator is not designed for use in a garage or any other outside installation.
- Avoid locating the refrigerator in moist areas.
Leveling your refrigerator
- It is very important for the refrigerator to be level in order to function properly. If the refrigerator is not leveled during installation, the doors may not close or seal properly, causing cooling, frost, or moisture problems.
- To level your refrigerator, turn the leveling foot clockwise to raise that side to the refrigerator or turn it counter-clockwise to lower that side.
Note: Having someone push against the top of the refrigerator helps to take some weight off the leveling foot and makes it easier to adjust.
Providing proper ventilation
Place the refrigerator at lease five inches from the wall to ensure proper airflow to the compressor. Do not place the refrigerator near any heat sources, such as a heater or stove, as this may put a strain on the compressor.
Providing a proper power supply
Check your local power source. This refrigerator requires a 110V-120V, 60Hz power supply.
Use a receptacle that accepts the grounding prong. The power cord is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this refrigerator.
Notes:
- The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.
- Never unplug your refrigerator by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet.
Setting the thermostat
Note: The refrigerator’s temperature ranges from 32° to 46.4°F (0° to 8°C).
- The first time you turn the refrigerator on, adjust the thermostat to “4” and let your refrigerator cool completely before putting food in. A full 24 hours is recommended.
- After it is fully cooled, test the temperature and adjust towards “1” to make it less cool or towards “7” to make it cooler, as needed. The “4” setting should be appropriate for home or office refrigerator use.
Notes:
- Turning the thermostat to “0” stops the cooling cycle but does not shut off the power to the refrigerator.
- If the refrigerator is unplugged or loses power, you must wait three to five minutes before restarting it. If you attempt to restart before this time delay, the refrigerator will not start.
- Large amounts of food will lower the cooling efficiency of the refrigerator.
- If you choose to change the thermostat setting, adjust it one increment at a time. Allow several hours for temperature to stabilize between adjustments.
Reversing the door position
You will need: A 10 mm socket driver and a Phillips screw driver available.
- Make sure that your refrigerator is unplugged and empty.
- Have someone available to assist you in the process.
- Keep all of the parts you remove to reuse them later.
- Removing the door requires that the refrigerator be tilted backwards. Adjust the two leveling feet to their highest postion.
Note: Do not lay the refrigerator completely flat as that could damage the coolant system.
- Remove the screw holding the top hinge cover to the top of your refrigerator, then remove the top hinge cover.
- Remove the screws holding the top hinge to your refrigerator, then remove the hinge.
- Remove the screw hole covers from the top left side of your refrigerator
- Pull the door upwards and remove it from the refrigerator.
- Unscrew the left leveling foot, then remove it.
- Remove the screws holding the bottom hinge and door stopper to the refrigerator, then remove the hinge and the stopper.
- Install the leveling foot you removed from the left side into the right bottom of your refrigerator.
- Install the bottom hinge and the door stopper on the right bottom of your refrigerator using the screws your previously removed. Tighten the screws.
- Align the hole in the bottom left of the refrigerator door with the bottom hinge pin, then install the door on the hinge pin.
- Place the top hinge pin into the top of the refrigerator door, then install the top hinge on the top left of the refrigerator with the screws your previously removed.
- Check the fit and alignment (vertical and horizontal) of the door and make sure it that moves freely open and closed, then tighten the screws holding the top hinge.
- Install the screw covers previously removed into the holes in the top right of the refrigerator.
- Adjust the leveling feet to level the refrigerator.
Maintaining your refrigerator
Your refrigerator is designed for year-round use with only minimal cleaning and maintenance. When you first receive it, wipe the case with a mild detergent and warm water, then wipe dry with a dry cloth. Do this periodically to keep your refrigerator looking new.
Caution:
To prevent damage to the finish, do not use:
- Gasoline, benzine, thinner, or other similar solvents.
- Abrasive cleaners.
Cleaning the interior of your refrigerator:
- Turn off the refrigerator and unplug it from the wall outlet.
- Remove all food.
- Wash the inside with a damp warm cloth soaked in a solution of one quart of
lukewarm water to two tablespoons of baking soda solution. - Be sure to keep the door gasket (seal) clean to keep the unit running
efficiently. - Dry the interior and exterior with a soft cloth.
Shutting down your refrigerator – long vacations (several months)
- Turn off the refrigerator and unplug it from the wall outlet.
- Remove all food.
- Clean the refrigerator.
- Leave the door open slightly to avoid possible formation of condensation, mold, or odor.
Caution: Use extreme caution with children. The unit should not be accessible to child’s play.
Moving Your Refrigerator
- Turn off the refrigerator and unplug it from the wall outlet.
- Remove all food.
- Securely tape down all loose items inside your refrigerator.
- Tape the doors shut.
Be sure the refrigerator stays in the upright position during transportation.
Tips on saving energy
- Locate your refrigerator in the coolest area of the room, away from heat producing appliances or heating ducts and out of the direct sunlight.
- Let hot foods cool before placing them in the refrigerator. Overloading the refrigerator forces the compressor to run longer. Foods that freeze too slowly may lose quality or spoil.
- Wrap foods properly and wipe containers dry before placing them in the refrigerator. This cuts down on frost build-up inside the refrigerator.
- Organize and label food to reduce door openings and extended searches.
Troubleshooting
Caution: Do not try to repair your refrigerator yourself. Doing so invalidates the warranty.
Specifications
ONE-YEAR LIMITED WARRANTY – INSIGNIA
Definitions:
The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”). For this warranty to apply, your Product must be purchased in the United States or Canada from a Best Buy branded retail store or online at www.bestbuy.com or www.bestbuy.ca and is packaged with this warranty statement.
DOWNLOAD PDF LINK