Anker EverFrost Powered Cooler 30 Welcome Guide
For FAQs and more information, please visit:
Attention
Important Safety Instructions
To reduce the risk of injury, users must read the instruction manual.
WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. If the power cord is damaged, it must be replaced by the manufacturer, service agent, or similarly qualified persons in order to avoid a hazard. The appliance is only to be used with the power supply unit provided with the appliance. Disconnect the power supply before cleaning and maintenance. Instructions for appliances incorporating batteries that are intended to be replaced by the user shall include the following:
- Battery type: Rechargeable lithium-ion battery (A17B0)
- Disposal of a battery into a fire or hot oven, or mechanically crushing or cutting off a battery, can result in an explosion.
- CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Do not use non rechargeable batteries!
- A battery subjected to extremely low air pressure may cause an explosion or leakage of flammable liquid or gas. Under abusive conditions, liquid may be ejected from the battery— avoid contact. If contact accidentally occurs, rinse with water. If liquid gets in your eyes, seek medical help as it may cause irritation or burns.
- The battery must be removed from the appliance before it is scrapped.
- The appliance must be disconnected from the main power supply when removing the battery.
- Do not dispose of the battery in heat or fire. The battery is to be disposed of safely.
- When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.
When connecting to the DC power supply, the appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance. The appliance shall not be exposed to rain. Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
WARNING: When positioning the appliance, ensure the power cord is not trapped or damaged.
WARNING: Do not place multiple portable socket outlets or portable power supplies at the rear of the appliance.
A child entrapment warning statement shall be included in either the operating instructions or in a use and care manual provided with each refrigerator and shall include the following or equivalent wording:
WARNING: Risk of child entrapment. Before you throw away your old refrigerator or freezer:
- Remove the doors.
- Leave the shelves in place so children cannot easily climb inside.
Prevent unintentional starting. Ensure the switch is off before connecting to the battery pack, picking it up, or carrying the appliance. Carrying the appliance with your finger on the switch or powering the appliance with the switch on may lead to accidents. Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing the appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally. Recharge only with the charger specified by the manufacturer. A charger suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can connect one terminal to another. Burn hazards or fire may occur if the terminals are shorted together.
Under abusive conditions, liquid may be ejected from the battery—avoid contact. If contact accidentally occurs, rinse with water. If liquid gets in your eyes, seek medical help. Liquid ejected from the battery may cause irritation or burns. Do not use a battery pack or appliance that is damaged or modified as they may exhibit unpredictable behavior resulting in fire explosion or risk of injury. Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 266°F (130°C) may cause an explosion. Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire. Have servicing performed by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the product is maintained. Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care. The battery pack must be used with the Anker adapter (GM95-145600-D) for charging. Do not expose the charger to rain, moisture, or snow. To reduce the risk of damage to the cigarette lighter plug and cord, pull by plug rather than the cord when disconnecting the charger. Make sure the cord is placed well so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. Do not operate the charger with a damaged cord or cigarette lighter plug—replace it immediately. Do not operate the charger if it has received a sharp blow, dropped, or otherwise damaged in any way. Do not disassemble the charger. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. To reduce the risk of electric shock, unplug the charger before attempting any maintenance or cleaning. Turning off controls will not reduce this risk. Please be warned that the unit must be properly assembled in accordance with the assembly instructions before it is used. Explain and describe the location, function, and operation of each unit control, including all user operated devices intended to reduce the risk of fire, electric shock, or injury to persons. Please be warned against tampering with such devices.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party. Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1-800-988-7973
RF Exposure Compliance Statement
This equipment complies with the FCC/IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.03ft (20cm) between the radiator and your body.
Bluetooth:
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.
Manufacturer: Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
What’s in the Box
Overview
Prop up the tray and set up the kickstand underneath the cooler.
LCD Screen
Powering Your Cooler
We do not recommend using multiple charging methods at the same time.
Without the Battery
With the Battery
Recharging via Solar Panel
Power the cooler by connecting the battery to a solar panel with an XT-60 to XT-60 cable.
USB-C Recharging
Power the cooler by connecting the battery to a wall outlet with the USB-C cable.
Using Your Cooler
- Press the power button for two seconds to turn on your cooler. The LCD screen will light up.
- Push the cover up to open the cooler
- Press the power button once to light up the LCD screen.
Installing the battery
Press the snap-fits to remove the battery cover. Place the battery inside and you will hear a click when the installation is successful. Then, place the battery cover back.
The battery cover will automatically open when lifted up.
Setting the Temperature
Press the settings button once to switch between Fahrenheit and Celsius. Press the up or down buttons to adjust the temperature, and confirm your temperature by pressing the button again.
Bluetooth
Press the settings button for 2 seconds to turn on Bluetooth. The Bluetooth icon on the screen will flash. It will automatically connect to your phone with Bluetooth on, and the icon will turn steady white.
The Bluetooth function will be turned off after 12 hours without any connection.
Car Battery Protection Grades
When powering the cooler via a car, press the settings button once to choose the car battery’s protection grade. Press the up or down buttons to adjust.
When the car’s battery voltage is lower than the set value without the battery, your cooler will stop working. When the car’s battery voltage is lower than the set value, the cooler switches to its own battery for power supply. Once the car battery is restored, it switches to the car battery’s power source.
The Anker App for Smart Control
You can remotely control your powered cooler using the Anker app. Please download the app and its user manual by scanning this QR code. Connect the device to a network before using the app for the first time. After connecting successfully, you can connect your devices off -grid.
Specifications
Troubleshooting
- Reminder to Close Doors: The buzzer will send a reminder if the cooler’s cover is not closed for more than 180 seconds.
- The cooler will stop working if the tilt angle exceeds 30 degrees. Place it horizontally, and it will resume normal operation in 5 minutes.
DOWNLOAD PDF LINK
