Cobra SC 200D Dash Cam + Rear Cam User Manual
THANK YOU!
For purchasing the new COBRA® SC 200D
View, edit, and share from your smartphone or desktop. Share & receive real-time driver alerts. Download today! drivesmarter.com/downloads
FCC ID:
BBOSC200, IC:906A-SC200. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. FCC NOTE: Modifications not expressly approved by the manufacturer could void the user’s FCC-granted authority to operate the equipment. Cobra® and the snake design are registered trademarks of Cobra Electronics Corporation, USA. Cobra Electronics Corporation™ is a trademark of Cobra Electronics Corporation, USA. Other trademarks and trade names are those of their respective owners.
SC 200D Features
Attach GPS mount and remove the protective film from the mount and front lens
Button Functions (Recording Stopped):
Settings Button: Access the dash cam’s Settings menu.
Takes a snapshot and stores it in the Photo Folder.
Enters the playback menu to review previous recordings and photos.
Begins loop recording.
Settings Button: Access the dash cam’s Settings menu.
Takes a snapshot and stores it in the Photo Folder.
Enters the playback menu to review previous recordings and photos.
Begins loop recording.Button Functions (While Recording):
When pressed the camera saves the current clip from being overwritten.- Takes a snapshot and stores it in the Photo Folder.
Toggles the microphone on/off. Note that the icon on the button indicates the action that will be taken when the button is pushed, not the current setting. The current setting is shown on the status bar at the top of the screen.
Stops loop recording. While in an Emergency Recording, you will be asked to confirm.
When pressed the camera saves the current clip from being overwritten.
Toggles the microphone on/off. Note that the icon on the button indicates the action that will be taken when the button is pushed, not the current setting. The current setting is shown on the status bar at the top of the screen.
Stops loop recording. While in an Emergency Recording, you will be asked to confirm.Voice Commands
SC200 will respond to certain voice commands so you can stay focused on the road ahead. Try the following voice commands.
| Say | Camera Action |
| “Front Video On” | Front-View camera is displayed on screen |
| “Rear Video On” | Rear-View camera is displayed on screen (optional accessory camera required) |
| “Record Video” | Begins loop-recording |
| “Lock Video” | (If currently recording), Camera locks the video and tags as Favorite |
| (If not currently recording), Camera begins emergency recording, locks first video and tags as favorite | |
| “Screen On” | Turn Display On |
| “Screen Off” | Turn Display Off |
| “Take Photo” | Takes a photo of front and/or rearview and saves to the “Photos” folder |
For Cabin View*
Connect Cabin Camera to the Video Input Port on the SC 200
For a View of the Road Behind You
- Connect the Extension Cable to the Video Input Port on the Dash Cam.
- Connect the Extension Cable to the Rear Camer
- Attach the Rear Camera to the Vehicle’s Back Window Warning: Please position the camera on the rear windshield so it faces out of the vehicle in the orientation shown.
