Cocoon HE160341 FPV Camera Drone User Manual
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced, or refunded at our discretion. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the competition and Consumer Act 2010 and similar stare and terrory waws. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major allure.
Safety Instructions
Follow all instructions and take notice of all warnings to reduce risk of fire or electric shock
- Read the instructions in this manual thoroughly before operating your Cocoon Voyager Quadcopter FPV.
- This Cocoon Voyager Quadcopter FPV must be operated safely at all times. It is the operator’s responsibility to alvravs the in cate conditions component of the Voyager Quadcopter FPV is operating correctly before.
- Always follow local aviation rules and regulations when flying the Voyager Quadcopter FPV. This Cocoon Voyager Quadcopter FPV is designed for ages 14%. Adult supervision is always desirable with any form of flying toy.
- Always ensure your tight area is safe. If a problem occurs with the Cocoon Voyager Quadcopter FPV, always contact the supplier before attempting to fly again Do not fly in windy, rainy, or low light conditions Nor-rechargeable batteries are nor to be recharged Rechargeable batteries are to be removed from the toy before being charged. Rechargeable batteries are only to be charged under adult supervision. Exhausted batteries are to be removed from the toy.
- The supply terminals are not to be short-circuited. Winplus Australasia will not take any responsibility for the incorrect use of the Cocoon Voyager Ovadcooter Fry.
Rules & Regulations
The following regulations must be followed when operating your Cocoon Voyager Quadcopter FPV in Australia.
- You must only operate this aircraft in your line of sight in daylight.
- You must not fly closer than 30 meters to vehicles, boats, buildings, or people.
- You must not fly over populous areas, such as beaches, other people’s backyards, heavily populated parks, or sports ovals where there is a game in progress. iS
- If you are in controlled airspace, which covers most Australian cities, you must not fly higher than 120 meters (400 feet).
- You should not fly within 5.5 km of an airfield. It’s illegal to fly for money or economic reward unless you have an unmanned operator’s certificate issued by the Civil Aviation Safety Authority (CASA).
Source: http://www.casa.gov.au/wcmswr/_assets/main/lib100071/flying_with_control_model.pdf It is the Voyager Quadcopter FPV operator’s responsibility to regularly check and abide by the current rules and regulations.
Incorrect operation of this Cocoon Voyager Quadcopter FPV may result in severe injury, loss of property, or fines. Winplus Australasia does not take any responsibility if local rules and regulations are not followed.
Technical Specifications
- Frequency: 2.4GHz
- Channel: 4CH
- Gyro: Quadcopter Size:
- Quadcopter Weight:0.136kg
- Charging time: Approx. 100 minutes
- Control distance: Approx. 45m
- Battery for quadcopter: 3.7V 500mAh
Features
FPV (First Person View) transmission to any iOS or Android smartphone to view and record videos and photos Headless and inverse control function 6-Axis gyro quad-rotorcraft flight for strong stability, movement, stronger wind resistance, and easier to control. 2.4GHz technology for anti-interference and RC range One key 360° flip feature Detachable WIFI 640 x 480 resolution camera.
Product Overview
Cocoon Voyager Quadcopter FPV
- Propeller Guards
- Camera
- Landing Skids
Remote Control – Buttons
- High/Low-Speed Button
- Antenna
- Indicator
- Left Control Stick
- Photo/Video Switch
- Left Tuning Switch
- On/Off Switch
- Trick Button
- Right Control Stick
- Forward/Back Trim
- Mode Switch
- LCD Display
Remote Control – Display
- Signal Indicator
- Mode Indicator
- Turn Left
- Throttle Lever Fine-tuning
- Throttle
- Right
- Backward
- Turn Left/Right Fine-tuning
- High/Low-Speed Indicator
- Control Battery Level
- Turn Right
- Forward/Backward Fine-tuning
- Throttle
- Left
- Sideways Fine-tuning
Operation
Flying the Cocoon Voyager Quadcopter FPV
WARNING: Incorrect operation of the Cocoon Voyager Quadcopter FPV may result in severe injury, loss of property, or fines. Winplus Australasia does not take any responsibility if local rules and regulations are not followed. Do not fly above 3 meters until you can accurately control the Cocoon Voyager Quadcopter FPV. Loss of the Cocoon Voyager Quadcopter FPV is not covered by warranty.
TIP:
The best way to know which direction the Cocoon Voyager Quadcopter FPV is facing is by the colored LEDs on its’ wings. The red lights will face forwards, while the green lights face backward. Always keep the Cocoon Voyager Quadcopter FPV in direct line of sight.
Hover up and down:
Push the left control stick up or down. The Voyager Quadcopter FPV will fly upward or downward. TIP: If you begin to lose control of your Voyager Quadcopter, turning the remote control off will stop the propellers turning and bring It back to the ground.
Forward and backward:
Push the right control stick up or down. The Voyager Quadcopter FPV will fly forward or backward.
Turn Left and Right:
Pull the left control stick left or right. The Voyager Quadcopter FPV will turn left or right.
Sideward fly:
Pull the right control stick left or right. The Voyager Quadcopter FPV will fly left or right.
Fine Tuning
The Voyager Quadcopter FPV should keep steady when using the left control stick only. At times, however, you may need to fine-tune the control to keep the Voyager Quadcopter FPV steady. Depending on the issue, use the following buttons to fine-tune the Voyager Quadcopter FPV;
Speed Control
This camera drone can be operated at low-speed and high-speed settings. These are indicated by the ‘L’and ‘H’on the remote control display. To change between low and high speed, press the ‘High / Low-Speed Button’ on the top left corner of the control.
Tricks
Once you are familiar with basic flight operations, you can:
- Fly the Voyager Quadcopter FPV to a height of more than 3 meters.
- Hold down the Trick button on the top right side of the remote control.
- While still holding down the Trick button, push the right control stick in any direction to perform a 360-degree flip.
Mid Air Start
Thanks to the 6-axis gyroscope, you can throw the Voyager Quadcopter FPV and push the throttle upwards. The Voyager Quadcopter FPV will automatically level out and hover smoothly in the sky.
Changing to Mode 2
This Cocoon Voyager Quadcopter FPV allows you to swap the sideward control with turn left/right control.
- a. With the remote control turned off, hold the mode switch to the right.
- b. Turn on the Remote Control. A longer beep sound will indicate that the mode has been changed. You will also notice that Mode 2 is now shown on the control display.
Resetting the Cocoon Voyager Quadcopter FPV
In the event of the Cocoon Voyager Quadcopter FPV flying strangely, first, check that there is no issue with fine tuning on the Remote Control. If fine-tuning did not solve the issue, you can reset the Cocoon Voyager Quadcopter FPV to factory settings with this method:
- a. Perform the steps in “Pairing the Voyager Quadcopter FPV with the Control” to pair with the Cocoon Voyager Quadcopter FPV.
- b. Hold both Remote Control levers at their bottom right position. The Cocoon Voyager Quadcopter FPV LEDs will flash rapidly.
- c After 2-3 seconds, the LEDs will return to normal. This indicates that the Cocoon Voyager Quadcopter FPV has restarted and reset successfully.
Repair and Refurbished Goods or Parts Notice
Unfortunately, from time to time, faulty products are manufactured which need to be returned to the Supplier for repair. Please be aware that if your product is capable of retaining user-generated data (such as files stored on computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player, games saved on a games console, or files stored on a USB memory stick) during the process of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to sending the product for repair. You should also be aware that rather than repairing goods, we may replace them with refurbished goods of the same type or use refurbished parts in the repair process. Please be assured though, refurbished parts or replacements are only used where they meet ALDI’s stringent quality specifications. If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint. Please telephone us on 1300 663 907 or write to us at:
- Winplus Australasia
- PO BOX 537
- Bayswater Business Centre
- Bayswater, VIC 3153
- Winplus Help Desk 1300 663 907
- (Operating Hours: Mon-Fri 08:30 AM to 6:00 PM)
- customercare@winplus.com.au
- www.winplus.com.au
