DOSS INSMY i3 True Wireless Earbuds User Manual
SPECIFICATIONS
- Earbud Weight: 4.5 grams
- Speaker Driver Size: 10 mm
- Supported Profiles: HFP, HSP, A2DP, AVRCP
- Bluetooth Version: 5.0
- Earbud Charging Time: Up to 1.5 hours
- Working Voltage: 5V
- Standby Time: Up to 70 hours
- Playtime (Normal mode): Up to 7 hours at 70% volume
- Playtime (ANC mode): Up to 5 hours at 70% volume
- Bluetooth Range: 10m
- Number of Microphones: 3
- Working Temperature: 0°C to +45°C
CHARGING CASE SPECIFICATION
- Charging Case Weight: 48 grams
- Charging Port: Type-C
- Number of Earbud Charges from Case: Up to 4 times
- Case Charging Time: Up to 2 hours
- FCC ID:2AEZG-13
PACKAGE CONTAINS
POWER ON
The earbuds will automatically turn on on opening the charging case.
POWER OFF
The earbuds will automatically turn off on closing off the charging case.
PAIRING
- Open the charging case.
- Turn on the Bluetooth of your device.
- Select ‘Add Device’ and from the list of devices, select Insmy-i3.
- Your Insmy-i3 is now paired with your device and ready to use.
- Note: Your Insmy-i3 will automatically connect to the last paired device as soon as you open the charging case.
RESET
- Make sure that Insmy-i3 is fully charged and the case is open throughout the process.
- Unpair/forget the earbuds from the ‘saved devices’ on your Bluetooth settings.
- Place both the earbuds inside the case.
- Open the charging case.
- Long press the button on the charging case for 10 seconds while it’s charging. Note: The 4 LEDs will flash in white 5 times indicating that the earbuds are reset.
CHOOSING YOUR EAR TIP SIZE
Earphones are fitted with medium-size tips. However, if you find they don’t fit perfectly, please remove and try the small and large ear tips. Follow the images and chart to learn how to wear the earbuds in the right manner.
SMART SOUND FEATURES
HYBRID ANC
The Insmy-i3 features 3 advanced microphones on each earbud that capture ambient/environmental noises. These noises are processed by the hybrid noise-cancellation system that equalises them before they reach your ears, making sure that you get the best sound. Long press the right earbud for 2 seconds to enter the ANC mode
TRANSPARENCY MODE
Transparency mode ensures that you get to hear the outer sounds and know what’s going on around you, without affecting the quality of what’s being played on your earbuds. Long press the right earbud for 2 seconds to enter transparency mode from the ANC mode.
How to clear the product memory of connected Bluetooth devices?
Put the earbuds into the charging case without closing the lid, long press 8 seconds to clear the paired Bluetooth device records. Clear successfully 4 lights will turn off after 3 seconds Failed 4 lights flash 10 times then go out.
FCC Note:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CONTROLS
CHARGING
EARBUDS
Place both earbuds in the case to charge them.
CASE
Place both earbuds in the case to charge them.
Warm Reminder
Troubleshooting for Low Volume. Most Android phones do not support volume synchronization (the volume of the phone and the volume of the earbuds need to be adjusted separately). When the wireless earbuds are connected to the phone, adjusting the volume of the phone only increases the volume of the audio source. If the volume of the earbuds is not adjusted, the music still low sound. The earphone’s volume needs to be turned up by tapping the earphones.
WARRANTY
The warranty covers your Insmy-i3 product, including accessories against manufacturing defects (if any) for 1 year from the date of purchase.
Things that are not covered in the warranty
- Unauthorized tampering, modifications, or repairs of the product.
- Physical damage of the product on the account of abuse, handling, storage, installation, or testing including any use that is not under the product manual or documentation, or any other instruction provided along with the Insmy-i3 product.
CONTACT US
Dear Valued Customer, We want you to be completely satisfied with your purchase. If there is any quality issue with your product, please contact our seller support first via Amazon message service or our support email insmy@ insmy.com.cn. And we will provide you with the best and quickest support. Sincerely, INSMY
Important Prompt
The product can be charged by 5V Chargers/USB ports only. Adapters over 5V such as quick chargers are not allowed, which may cause fire or explosion.
Note: The headphones are too small to fit on the label, and are stored in the instruction manual.
