Elgato-4K60 2x2-TV-Wall-Controller-FEATURE

Elgato 4K60 2×2 TV Wall Controller User Manual

Elgato-logo

Elgato 4K60 2×2 TV Wall Controller User Manual

Elgato-4K60 2x2-TV-Wall-Controller-IMG

Introduction

4K60 2×2 tv wall controller

The 2×2 tv wall controller , support 1-way HDMI input and 4 HDMI output, the main function is to divide a complete HDMI,HD image signal into 4 blocks and assign to 4 video display unit (such as Rear projection unit, LCD TV, etc.), Complete with 4 HDMI high-definition video display units to form a large dynamic image screen.

Elgato-4K60 2x2-TV-Wall-Controller-Fig1

Support modes

Elgato-4K60 2x2-TV-Wall-Controller-Fig2

Features

  • Support 1 HDMI input
  • Support input HDMI 2.0
  • Support 4 HDMI outputs
  • Support input 4K60HZ,and lower resolution
  • Support output resolution 1920x1080P60
  • Support multiple splicing modes, easy to operate, plug and play

Physical interface diagram

Elgato-4K60 2x2-TV-Wall-Controller-Fig3

Remote controller

Elgato-4K60 2x2-TV-Wall-Controller-Fig4

Operation steps

STEP 1: Connect hdmi source to hdmi input with HDMI cable,connect hdmi output to TVs.
STEP 2: Connect 12V power adaptor.
STEP 3: Set up splicing mode by the MODE button on the unit or remote controller.

The Package includes
  • 2X2 tv wall controller x1
  • Power adapter x1
  • User Manual x1

Connection operation

Elgato-4K60 2x2-TV-Wall-Controller-Fig5

RS232 remote control

This product supports RS232 remote command control and returns the status. Connect the RS232 port of the splicer to the PC COM port by a Rs232 uncrossed cable or USB to RS232 adapter. Then install serial port tools in the PC can use RS232 control.

Parameter configuration of serial port on PC side

Elgato-4K60 2x2-TV-Wall-Controller-Fig6

Serial port command table:

Elgato-4K60 2x2-TV-Wall-Controller-Fig7

DOWNLOAD PDF LINK

4k604k60

https://www.elgato.com/us/en

Leave a Reply