Table of contents
show
GAMDIAS Athena E1 Elite ATX Micro Tower Gaming Case User Manual
EXPLODED VIEW PARTS
0. Chassis Body
1. Tempered Glass Left Side Panel
2. Right Side Panel
3. Top Dust Filters
4. Front Panel
5. 120MM ARGB FAN
6. IO Port
7. HDD Cage
8. Rubber Foot
9. 120 MM Fan
ACCESSORY
SIDE PANEL REMOVAL
- Remove the side panel
MOTHERBOARD INSTALLATION
- Lay down the chassis
- Install the motherboard in proper location and secure it with screws
PSU INSTALLATION
- Place the PSU in proper location.
3.5″ 2.5″ HDD INSTALLATION
- A. 3.5″ HDD:
Align the HDD into the mounting holes and screw in. - B. 2.5″ SSD:
Align the SSD into the mounting holes and screw in.
AIR COOLING COMPATIBILITY
- Top: 2 x 120mm or 2 x 140mm
- Front: 1 x 120mm or 1 x 140mm
- Rear: 1 x 120mm or 1 x 140mm
RADIATOR COMPATIBILITY
- Top: 280 mm or 240 mm
- Rear: 140 mm or 120 mm
I/O PORTS
- Power Button
- Fan LED Control
- USB 2.0
- Headphone
- Mic
- USB 2.0
- USB 3.0
I/O CONNECTORS
See your motherboard’s manual for front panel header locations and pin-outs.
SPECIFICATIONS
- SERIES: MESH Strips Series
- Product Name: ATHENA E1 Elite
- Case Type: MID Tower
- Dimension (L x W x H): 420 x 230 x 460 mm or 16.5 x 9 x 18.1 inch
- Chassis Dimension (L x W x H): 350 x 230 x 445 mm or 13.7 x 9 x 17.5 inch
- Motherboard Support: ATX, Micro-ATX,Mini-ITX
- Expansion Slots: 7+3
- Material: SPCC , ABS , Tempered glass
- Window: left
- Pre-installed Control BOX: NO
- Motherboard Sync: 5V 3-Pin Addressable Header
- Drive Bays: 2 x 3.5″ or 1 x 2.5″+1 x 3.5″(HDD Cage) or 3 x 2.5″
- I/O Port: USB 3.0 x1, USB 2.0 x 2, HD Audio x1, LED Control x1
