Agptek HA0098 Dial Set Telephone
Thank you for purchasing one of our newest dial-pad headset telephones. We’re excited to do business with you. To better know about this product, hope you could read this manual carefully before using it. If you still have further queries and suggestions, welcome you to email our customer service at cs@agptek.com.
Safety Instruction
When using this dial-pad headset telephone, the following basic safety precautions should be followed to reduce the risk of fire, electronic shock, and so on.
- Read, understand, and pay attention to all warnings and instructions.
- Unplug the telephone from the wall outlet before cleaning, then use a soft wet cloth to clean it. Do not use liquid cleaners or aerosol cleaners.
- Do not place the telephone on an unstable object in case of dropping and breaking.
- Do not overload wall outlets and power cords so as to avoid fire or electron shock risk.
- Do not add any object into the cabinet slot of the telephone because this may result in dangerous voltage or short circuits.
- Avoid moving or disconnecting this telephone in a heavy storm, especially in lighting or thunder.
- Do not take the telephone apart privately without authorization which may void the warranty. If there is a defect, please send it to the service center for repair.
Features
- High Definition Voice Communication High-Quality Noise Cancellation Headset with Volume Adjustment
- Flash and Re-dialing Functions
- Mute Function with LED Indication
- Ringing Sound High to Low Selection
- Flash Time 100ms or 600ms Choice
- Auto Mode & Manual Mode
- A 3.5 mm Headphone Jack(Recording interface) Connected to Computer Sound Card
- FSK/DTF Caller ID Display & Automatic Checking
- 30 Groups of Incoming & 5 Groups of Outgoing Number Memories
- 2 Digits PABX Code Setup
- 32 Digits Pre-dialing and Editing
- No Additional Power is Needed
Receiving a cal
The telephone will ring when a call comes, and LCD displays the date, time, as well as incoming number. Note: Please do not receive the call until you can see the incoming number and other information in your telephone LCD because it takes some time for the telecommunications company to transfer this information.
Auto Mode The telephone will receive a call automatically after the first ring with auto mode
Making a Call
- Press the [ON/OFF] key.
- When you hear the dial tone, input the desired number
- You can make a conversation after 6 seconds.
- When finishing, press the [ON/OFF] key again.
Main Key Function
- Mute: The microphone will stop working by pressing this key during the phone conversation, and the indicator light will tum red; press this key again the microphone will begin working.
- Flash: This function enables your telephone to get a new dial tone or realize three-way calling. The telephone has a 100/600ms flash time switchable.
- Redial: You can redial the latest outing number in off-hook condition. Press the key in the on-hook state the telephone will dial the number shown on the LCD.
- Ringer High/ Low/Off Switch: Slide the ringer switch to adjust the ring sound you want, and the ring will go into the earphone if you slide to the [Off ]switch.
- Headset Volume Switch: Scroll the volume button to turn down or turn up the volume.
Setting
Date & Time
In the on-hook state, press the [Set] key until LCD shows “SET 1 DATE” then press the key again, edit the year via A or W key when it blinks, and press the [Set] key after completion. It is the same way to set a month, date & time. The final step is to press [Del] to save and exit the setting. Notes: FSK caller ID will update the time automatically but DTMF Caller ID not.
Local Code
In the on-hook state, press [Set] and A key until LCD shows “SET 2 CODE” then press [Set] key again, and “CODE- – –” will be displayed. Next press the [Set] key to set local code. (If the local code is set then it will show the local code.) and use A or V key to choose 0 to 9. After completing the first number and press the [Set] key to set the next number in the same way. The final step is to press [Del] to save and exit the setting.
P Code
In the on-hook state, press [Set], then A key two times until LCD shows “SET 3 PCODE”. Next press the [Set] key and it shows “PCODE- -“. Press the [Set] key to set Pcode. (If Pcode is set then it will show the Pcode.) and use A or V key to choose 0 to 9. After completing then press Dell to save and exit setting.
AUTO IP”.
Next press the [Set] key and it shows “AUTO IP OFF” and “OFF” blinks, press & or v to set auto IP on or off. When selecting “AUTO IP ON”, press the [Set] key to confirm, and the LCD displays “INPUTCODE”, enter the special service number, card number, and password for different telecom company IP service, and press [Del] to revise the wrong inputting, press SET button to save setting and exit.
Dialing Mode
In the on-hook state, press [Set], then A key four times until LCD shows “SET 5 P-T’. Next press [Set] key and it shows “TONE” and blinks, press A or V to set TONE/PULSE Mode. Choose the right mode according to the different PBX in the world. Then press [Set] to save and [Del]back to the menu.
LCD Bright
In the on-hook state, press [Set] and key until LCD shows “SET 6 LCD” then press the [Set] key again, and “LCD 3” will be displayed. Use A or W key to adjust the brightness you want then press [Set] to save and [Del] exit.
- smooth to Setup — Connects this smartphone headset to an existing well-known cellphone jack with durable creation and inflexible design for greater sturdiness. (Please kindly note that this cellphone headset isn’t always like-minded with the net cable; You can’t pick out up the telephone without the usage of the headset.)
- Noise Cancellation Microphone — geared up with noise canceling microphone, AGPtEK phone with a headset can growth the voice clarity for advanced excessive exceptional sound and display screen with 90% history noise in order to perfectly and honestly gift the candy voice of the telephone operator.
- FSK/DTMF Caller identification display — The dialer can ring or be silent when getting hold of incoming calls as well the smartphone quantity will be displayed. the entirety protected of this name center telephone and headset; so you can simply plug into the wall cellphone port and you are equipped to make and obtain smartphone calls.
- volume Adjustment — Scrolling wheel extent button of the corded telephones can make the manipulation of the sound without difficulty and allows a more bendy listening revel.
- broadly Used — AGPtEK Corded cellphone with Headset & Dialpad is a good preference for everyone who spends a variety of time at the telephone – such as telephone sales, smartphone Counseling services, coverage, Hospitals, Banks, Telecom operators, organizations- and who desires to soak up minimal table space for a smartphone/headset device.
DOWNLOAD PDF
Agptek HA0098 Dial Set Telephone User Manual
