Honeywell HHF550 Turbo Force® Heater Fan User Guide

Honeywell HHF550 Turbo Force® Heater Fan User Guide

IMPORTANT SAFETY INSTRUCTIONS

WARNING – READ AND SAVE THESE OPERATING AND SAFETY INSTRUCTIONS BEFORE USING THIS HEATER. IF YOU DO NOT UNDERSTAND THESE INSTRUCTIONS OR PRODUCT LABELS PLEASE CALL OUR CUSTOMER REPRESENTATIVES AT 1-800-477-0457 FOR ASSISTANCE BEFORE USING THIS PRODUCT

Warning – Failure to follow any of these safety instructions could result in fire, injury, or death.

YOUR RESPONSIBILITIES

Electrical appliances may expose people to hazards that can cause severe injury as well as death. The use of electrical products may create hazards that include, but are not limited to, injury, fire, electric shock and electrical system damage. These instructions are intended to provide you with the information you need to use the product correctly and to avoid such hazards.

When using electrical appliances, basic precautions should always be followed to reduce risk of fire, electric shock, and injury to persons including the following:

• Warning – Read all instructions before using this heater.
• Warning – This heater is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. Use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the heater
  and keep them away from all sides of the heater.
• Warning – Extreme caution is necessary when any heater is used by or near children or invalids, and whenever the heater is left operating and unattended
• Warning – ALWAYS unplug heater when not in use.
• Warning – DO NOT operate any heater with a damaged cord or plug, any heater that malfunctions, or any heater that has been dropped  or damaged in any manner. Discard heater or return heater to authorized service facility for examination and/or repair
• Warning – For residential use only
• Warning – DO NOT use outdoor
• Warning – This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations. DO NOT locate heater where it may fall into a bathtub or other water container
• Warning – DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or similar coverings. DO NOT route cord under furniture or appliances. Arrange cord away from traffic areas and where it will not be a tripping hazar
• Warning – This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature
• Warning – This heater draws 12.5 amps during operation. To prevent overloading a circuit, DO NOT plug the heater into a circuit that already has other appliances working.
• Warning – It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn out
• Warning – To disconnect the heater, first turn off the product, then grip the plug body and pull it from the wall outlet. DO NOT pull by the co
• Warning – DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause electric shock, fire, or damage to the heat
• Warning – To prevent a possible fire, DO NOT block air intakes or exhaust in any manner. DO NOT use on soft surfaces, like a bed, or where openings may become block
• Warning – A heater has hot and arcing or sparking parts inside. DO NOT use it in areas where gasoline, paint or flammable liquids are used or sto
• Warning – Use this heater only as described in this manual. Any other use not recommended by th manufacturer may cause fire, electric shock, or injury to persons
• Warning – ALWAYS plug heater directly into a wall outlet/receptacle. DO NOT use with an extension cord or relocatable power tap (outlet/power strip).
• Warning – NEVER tamper with this product or attempt to fix it. Any tampering with, or modification of this product can result in serious injury, death, or fire. DO NOT open. Risk of electric shock. There are no user serviceable parts inside.Warning – DO NOT remove product labels that contain warnings or safety instruct
• Caution – The output of this heater may vary and its temperature may become intense enough to burn exposed skin. Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burn
• Caution – Before cleaning, or storage, or when not in use, turn the product’s controls to the OFF position and unplug the heater from the electrical outlet and allow to
• Caution – Place the heater on a firm, level, open surface free from obstructions and at least 3 feet (0.9m) away from any combustible materials. DO NOT use on an unstable surface such as bedding or deep carpeting. Be sure the heater is not in a position where it may be tripped over by small children or pet
• Caution – If your home has aluminum wiring have a licensed electrician check your receptacle’s connections. When using a 1500 watt heater, aluminum wire connections can cause a safety issue.
• SAVE THESE INSTRUCTIONS

SET UP

The Honeywell TurboForce® Heater Fan requires no assembly. Simply unpack heater and save all packaging materials for off-season storage. Place the heater on a firm, level, open surface free from obstructions and at least 3 feet (0.9m) away from any wall or combustible material. DO NOT use on an unstable surface such as bedding or deep carpeting. BE SURE THE HEATER IS NOT IN A POSITION WHERE IT MAY BE TRIPPED OVER BY CHILDREN OR PETS.

MOVING THE HEATER

This heater is equipped with a recessed carrying handle for your convenience. Turn off the heater. Allow it to cool for ten minutes. Unplug heater and move.

OPERATION

NOTE: The Honeywell TurboForce® Heater requires no assembly.
NOTE: Never leave an operating unit unattended

Model HHF550 Series – Manual TurboForce® Heater Operation

With the Power Knob in the OFF position, plug the heater into a polarized 120V outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one way.

The Power Knob is equipped with three (3) settings: (Fig. 1) Fan Only , Low

and High . The Low heat setting uses 750 watts of power and the High heat setting uses 1500 watts of power. The Fan only setting uses very low power and does not provide heat. You can select the proper setting to accommodate your comfort level with the Power Knob. When you choose any setting the red Power Light will come on. The Low heat setting does not require as much electricity to operate, it is more energy efficient and may be a better option if you are concerned about the amperage draw on a circuit when the heater is on the High setting. Use the Fan only setting for optimal comfort level year round.

NOTE: Controls/features will vary slightly by model The TurboForce® Heater is also equipped with both a pivoting head and oscillation to provide heat flow how and where you want it most.

3 WAY PIVOT (Fig. 2) – the head of the heater can be adjusted up at 3 different angles – 15°, 30°, 45° – to provide more focused heat flow within the room.

• The 15° pivot angle – allows the heat to flow more directly at a seated level.
• The 30° pivot angle – provides heat flow at a standing level.
• The 45° pivot angle – directs heat flow towards the ceiling. This angle is ideal to help generate whole room heat circulation.

OSCILLATION – the TurboForce® Heater also has an oscillation feature which distributes warmed air over a wider area for increased whole room heat circulation.

• To activate the oscillation feature, press the oscillation  button once. Press the oscillation button again to turn the oscillation feature off.
• Turn the Power Knob to OFF and allow it to cool for 10 minutes, then unplug the heater when you are finished using it.

Model HHF565 Series – Digital TurboForce® Heater Operation

Turn heater on by pressing the Power Button . The Power Indicator will illuminate and the heater will start in the Low heat level setting (Fig. 4). This heater has two operational modes, which can be chosen using the red switch on the back of the unit (Fig. 3): Continuous heating  – heater will run until it is manually shut off.

Auto-Off mode – heater will automatically shut off after 8 hours each time that you use the heater. This built-in feature helps ensure that the heater is not accidentally left on for an extended period of time.

NOTE: See the SafeGuard® Auto-Off Feature section for more information on this feature.

This heater comes pre-set from the factory with the Auto-Off mode engaged. When the unit is turned on, the Auto-Off icon will be illuminated on the top of the controls. All features are functional while operating in the Auto-Off mode. Should you NOT want the heater to automatically shut off after 8 hours, switch to Continuous heating by simply pressing the red switch on the back of the unit. Once selected, the Continuous heat icon will illuminate on the top of the control panel.
To select a Heat Setting, press :

• For Low , this setting uses 750 watts of power
• For High , this setting uses 1500 watts of power

NOTE: The Low setting does not require as much electricity to operate. It is more energy efficient and may be a better option if you are concerned about saving energy.

To use the Fan only (no heat), press the Fan button .
To set the thermostat, continue to press the Heat Level button until Auto is illuminated. There are 4 pre-set comfort settings from which to choose: 65°, 70°, 75°, 80°. Continue to press the Heat Level button to select your desired room temperature setting. The heater will operate at HIGH heat in order to reach this desired temperature.

NOTE: If the Current Temperature is higher than your Desired Temperature, the heater will be off until the room temperature falls below your desired temperature.
To set the Timer, press the button to select 1, 2, 4, or 6 hour setting. The heater will run for that chosen period in the selected mode and automatically shut off after the desired time has passed.

The TurboForce® Heater is also equipped with both a pivoting head and an innovative selectable oscillation feature to provide heat flow how and where you want it most.

3 WAY PIVOT (Fig. 5) – the head of the heater can be adjusted up at 3 different angles – 15°, 30°, 45° – to provide more focused heat flow within the room.

• The 15° pivot angle – allows the heat to flow more directly at a seated level.
• The 30° pivot angle – provides heat flow at a standing level.
• The 45° pivot angle – directs heat flow towards the ceiling. This angle is ideal to help generate whole room heat circulation.

3 WAY OSCILLATION (Fig. 6) – the TurboForce® Heater has been engineered to include a unique selectable oscillation feature which allows for an even more customized approach to heat circulation.

• The 60° oscillation angle – provides heat flow within a more personal, focused area.
• The 90° oscillation angle – allows for wider area coverage.
• The 120° oscillation angle – covers more of the room, providing a whole room heat circulation experience.

SAFEGUARD® AUTO SHUT-OFF FEATURE (HHF565 Series Only)

The Honeywell TurboForce® Heater is enhanced with a SafeGuard® Auto Shut-Off feature. This innovative feature  is designed to automatically shut the heater off after 8 hours of continuous use.

How it works: By default, the TurboForce® Heater comes with the Auto Shut-Off feature engaged. If you choose to operate the heater in  the Auto Shut-Off mode , the heater will shut off automatically after 8 hours every time the heater is used, unless the heater is turned off prior to the 8 hour auto-off time. All features are functional while operating in the Auto Shut-Off setting. If you choose to disengage this feature, the unit will operate in the Continuous heat mode .

• Press the SafeGuard® Auto Shut-Off switch on the back of the unit (Fig. 7) to select either the Auto Shut-Off or Continuous heating modes. The corresponding icon will illuminate on the controls to indicate which mode you are in.

SAFETY FEATURES

The Honeywell TurboForce® Heater is equipped with several features for added protection:

• A 360° tip-over switch that disables the heater if it is tipped in any direction.
• A high temperature safety sensor prevents overheating.
• This heater is also equipped with a thermal cut-off fuse that will permanently shut down the heater should it operate at a higher than normal temperature. If activated, the unit will need to be replaced.
• This heater was built using a high temperature plastic and has a cool to touch housing and handle.
• This heater is designed with thermal insulated wiring for heat resistance and reinforced wire connections to help protect against loose connections.
• The HHF565 Series models also include a SafeGuard® Auto Shut-Off feature. If selected, this feature is designed to automatically shut the heater off after 8 hours of continuous use.

CLEANING AND STORAGE

It is recommended that the Honeywell TurboForce® Heater be cleaned at least once a month and before off-season storage.

• Turn Off and unplug heater. Allow unit to cool for 10 minutes.
• Use a dry cloth only to clean the external surfaces of the heater. DO NOT USE WATER, WAXES, POLISHES OR ANY CHEMICAL SOLUTION.
• Before storing, clean the TurboForce® Heater using the above-mentioned steps. Wrap the cord around the unit. Place in its original box and store it in a cool, dry place.
• This heater does not disassemble.

TROUBLESHOOTING

PRODUCT SPECIFICATIONS

3 YEAR LIMITED WARRANTY

You should first read all instructions before attempting to use this product. A. This 3 year limited warranty applies to repair or replacement of product found to be defective in material or workmanship. This warranty does not apply to damage resulting from commercial, abusive, unreasonable use or supplemental damage. Defects that are the result of normal wear and tear will not be considered manufacturing defects under this warranty.

CUSTOMER SERVICE

Questions or comments
Call us toll-free at: 1-800-477-0457
E-mail: consumerrelations@kaz.com
Or visit our website at: www.HoneywellPluggedIn.com
Please be sure to specify the model number.

NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST OR SEE YOUR WARRANTY. DO NOT RETURN THE HEATER TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE PRODUCT OR PERSONAL INJURY.

FFC COMPLIANCE (HHF565)

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The user is cautioned that changes or modifications made to the equipment without the approval of manufacturer could void the user’s authority to operate the equipment.

DOWNLOAD PDF LINK

hhf565b-honeywell-turbo-force-heat-circulator-manual

https://www.honeywellpluggedin.com/honeywell-turbo-force-power-heat-circulator