You are currently viewing Honeywell RCHT9510WFW2001 THERMOSTAT

Honeywell RCHT9510WFW2001 THERMOSTAT

Honeywell logo

Honeywell RCHT9510WFW2001 THERMOSTAT

Honeywell RCHT9510WFW2001 THERMOSTAT product img

Included in your box:

Honeywell RCHT9510WFW2001 THERMOSTAT fig 1

Tools you will need:

Honeywell RCHT9510WFW2001 THERMOSTAT fig 2

You may need:

Honeywell RCHT9510WFW2001 THERMOSTAT fig 3

Compatibility Section

  • REQUIRED: A C-Wire (common wire) is needed for 24 VAC power. If you do not have a C-Wire, then a C-Wire Adapter is provided. This guide will help you determine if you have a C-Wire or will need to use the included C-Wire Adapter (Step 10). The C-Wire is a wire that originates from your heating and cooling system and needs to be connected to the C terminal on your thermostat. There is no universal color used to designate this type of wire.
    Honeywell RCHT9510WFW2001 THERMOSTAT fig 4
  • Compatible with most heating/cooling, and heat pump systems
  • Does not work with electric baseboard heat (120-240V)
  • Does not work with millivolt systems
  • Does not support S terminals for indoor and outdoor sensors
  • Android or iOS smartphone, tablet, or device

Removing your old thermostat

  1. Turn the power OFF. To protect yourself and your equipment, Turn off the power at the breaker box or switch that controls your heating/cooling system.
  2. Check that your system is off. Change the temperature on your old thermostat. If you don’t hear the system turn on within 5 minutes, the power is off.
    Note: If you have a digital thermostat that has a blank display, skip this step.
  3. Remove the old thermostat’s faceplate. On most thermostats, you can take off the faceplate by grasping and gently pulling. Some thermostats may have screws, buttons, or clasps. Do not remove any wires from your thermostat at this time!
  4. Make sure there are no 120/240V wires. Do you have thick black wires with wire nuts? Is your thermostat 120V or higher? If you answered yes to either of these questions, you have a line voltage system and the thermostat will not work. If you are unsure visit: honeywellhome.com/support
  5. Take a picture of how your wiring looks right now. Be sure to include the letters next to the terminals where the wires are inserted. This will be a helpful reference when wiring your thermostat. Tip: If the color of your wires has faded or if 2 terminals have the same wire color, use the wire labels provided in the package to label each wire.
  6. Disconnect the wires and remove the old wall plate. Use a screwdriver to release wires from terminals. Then, use a wire label to identify each wire as it’s disconnected. The letter on the wire label should match the letter on the terminal. Tip: To prevent wires from falling back into the wall, wrap the wires around a pencil.

Getting the most from the T9 Smart Thermostat

Prioritize Rooms
Prioritize a specific room or multiple rooms, or let comfort follow your move using built-in motion detection. Control on the Go Adjust your thermostat from anywhere using your tablet or smartphone. Save Energy With geofencing, you can save money on the most expensive part of your energy bill while you’re away.

Simple Installation
The thermostat automatically programs itself. Just answer a few simple questions and you’ll be up and running in no time. Whole-Home Range With up to a 200-foot* range, 20 sensors with temperature, humidity, and occupancy detection can connect to your thermostat from throughout your home. *Range can vary based on home construction, wireless interference, and other factors. Know Your Home Is Safe to Get customizable alerts on your mobile device such as when the basement is so cold a pipe could burst, or if the baby’s room is getting too hot.

Using your thermostat
The screen will wake up by pressing the center area of the displayed temperature.

Honeywell RCHT9510WFW2001 THERMOSTAT fig 6

Using Priority
Priority creates an average temperature in your home based on specific rooms. This allows you to prioritize comfort where you want it. From the Home screen, select MENU, then Priority.

Honeywell RCHT9510WFW2001 THERMOSTAT fig 7

Honeywell RCHT9510WFW2001 THERMOSTAT fig 8

Troubleshooting

If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily.

Display is blank

  • Check the circuit breaker and reset it if necessary.
  • Make sure the power switch for the heating & cooling system is on.
  • Make sure the furnace door is closed securely.
  • Make sure the C wire is connected.
  • Make sure the R/Rc jumper is set correctly.

The heating or cooling system does not respond

  • Press Menu > System Mode > Heat > Done to set the system to Heat mode. Make sure the desired temperature is higher than the indoor temperature.
  • Press Menu > System Mode > Cool > Done to set the system to Cool mode. Make sure the desired temperature is lower than the indoor temperature.
  • Check the circuit breaker and reset it if necessary.
  • Make sure the power switch for the heating & cooling system is on.
  • Make sure the furnace door is closed securely.
  • Wait 5 minutes for the system to respond.

Temperature settings do not change
This thermostat has adjustable minimum and maximum limit settings for heating and cooling. If these settings were not adjusted when setup was done, heat has a setting range of 40- 90°F, and cool has a range of 50-99°F.

CAUTION: ELECTRONIC WASTE NOTICE
The product should not be disposed of with other household waste. Check for the nearest authorized collection centers or authorized recyclers. The correct disposal of end-of-life equipment will help prevent potential negative consequences for the environment and human health.

2-year limited warranty

Resideo warrants this product, excluding battery, to be free from defects in workmanship or materials, under normal use and service, for a period of one (1) year from the date of first purchase by the original purchaser. If at any time during the warranty period, the product is determined to be defective due to workmanship or materials, Resideo shall repair or replace it (at Resideo’s option). If the product is defective, (i) return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it; or (ii) call Resideo Customer Care at 1-800-468-1502.

Customer Care will make the determination whether the product should be returned to the following address: Resideo Return Goods, 1985 Douglas Dr. N., Golden Valley, MN 55422, or whether a replacement product can be sent to you. This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Resideo that the defect was caused by damage that occurred while the product was in the possession of a consumer. Resideo’s sole responsibility shall be to repair or replace the product within the terms stated above.

Continued

RESIDEO SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you. THIS WARRANTY IS THE ONLY EXPRESS WARRANTY RESIDEO MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,

IS HEREBY LIMITED TO THE ONE-YEAR DURATION OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. If you have any questions concerning this warranty, please write Resideo Customer Care, 1985 Douglas Dr, Golden Valley, MN 55422, or call 1-800-468-1502.

REFERENCE LINK

https://www.manua.ls/honeywell/rth8500d/manual

DOWNLOAD LINK

Honeywell RCHT9510WFW2001 THERMOSTAT

Leave a Reply