Honeywell TH6320ZW T6 Pro Z-Wave Thermostat
How to use your thermostat
If the thermostat is powered by 24 VAC, then the screen will stay lit for 45 seconds after you complete your changes. If powered by battery only, the screen stays lit for 8 seconds. To include or exclude the thermostat from the Z-Wave network, go to thermostat MENU then Z-WAVE SETUP
For help, contact
- WEB honeywellhome.com
- PHONE 1-800-468-1502
- SOCIAL Twitter: @Honeywell_Home,
- Facebook: Honeywell Home
Power Requirements:
Battery power: AA alkaline battery 3pcs.; C-wire input: 18-30VAC; 50Hz-60Hz
Electrical Ratings:
| Terminal | Voltage (50/60Hz) | Running Current |
| W Heating | 18-30 Vac | 0.02-1.0 A |
| (Powerpile) | 750 mV DC | 100 mA DC |
| W2 (Aux) Heating | 18-30 Vac | 0.02-1.0 A |
| E Emergency Heat | 18-30 Vac | 0.02-0.5 A |
| Y Compressor Stage 1 | 18-30 Vac | 0.02-1.0 A |
| Terminal | Voltage (50/60Hz) | Running Current |
| Y2 Compressor Stage 2 | 18-30 Vac | 0.02-1.0 A |
| G Fan | 18-30 Vac | 0.02-0.5 A |
| O/B Changeover | 18-30 Vac | 0.02-0.5 A |
| L/A Input | 18-30 Vac | 0.02-0.5 A |
Resideo Inc., 1985 Douglas Drive North Golden Valley, MN 55422 www.resideo.com 33-00295EFS—05 M.S. Rev. 04-19 | Printed in the United States This product is manufactured by Resideo Technologies, Inc., Golden Valley, MN, 1-800-468-1502 ©2019 Resideo Technologies, Inc. The Honeywell Home trademark is used under license from Honeywell International Inc. All rights reserved.
