JBL JEMBE Wireless Two-Piece Bluetooth Speaker System User Guide
Two-PIECE WIRELESS SPEAKER SYSTEM
The JBL® Jembe Wireless system is a compact and elegant speaker system that provides superior low bass, mid range and highs. To use the JBL Jembe Wireless speaker system with a Bluetooth wireless device, pair the device with the JBL Jembe Wireless the JBL Jembe Wireless’s white LED will change to blue. The device’s audio content will play through the JBL Jembe Wireless system. The JBL Jembe Wireless speaker system has a built-in power saving feature.If no audio signal is present for approximately three minutes, the speakers will go into power-standby mode and the LED will turn off.
Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus.
Technical Specifications
Power 6 watts per satellite at 1% THD
Dimensions (W x D x H): 4-3/16″ x 4-3/16″ x 5-5/16″ (106mm x 106mm x 135mm)
Input impedance >5k ohms
Signal-to-noise ratio >80dB
Frequency response 80Hz – 20kHz
Input sensitivity 250mV for rated power
Power requirement 12V DC, 1.5A
Power consumption 0.5W (standby); 20W (maximum)
DOWNLOAD PDF
JBL JEMBE Wireless Two-Piece Bluetooth Speaker System User Guide
