Koss-KSC35-Wireless-Bluetooth-Ear-Clip-Headphones-User-Guide-Feature-Image

Koss KSC35 Wireless Bluetooth Ear Clip Headphones User Guide

Koss-KSC35-Wireless-Bluetooth-Ear-Clip-Headphones-User-Guide-Image

Koss KSC35 Wireless Bluetooth Ear Clip Headphones User Guide

Koss-KSC35-Wireless-Bluetooth-Ear-Clip-Headphones-User-Guide-Image-1

Important Safety Instructions

  1. Do not leave your devices in close proximity to open flames or extreme sources of heat.
  2.  Do not expose your devices to liquid or extreme humidity.
  3.  Do not drop, disassemble, microwave, incinerate or paint your devices.
  4.  Do not expose your devices to extreme high or low temperatures.
  5.  Clean your devices with a clean, dry cloth.
  6.  Do not leave your devices in direct sunlight for an extended period of time.
  7. Do not dispose of your devices in a re. The battery could explode causing injury or death.
  8. Only charge your devices with the components supplied with the devices.

Bluetooth Discovery Mode

To enter Bluetooth discovery mode, from an off state, depress and hold the center button until light flashes red and blue.

Koss-KSC35-Wireless-Bluetooth-Ear-Clip-Headphones-User-Guide-Image-2

Select “Koss KSC35 Wireless” on transmitting device to pair:

Koss-KSC35-Wireless-Bluetooth-Ear-Clip-Headphones-User-Guide-Image-3

 Bluetooth Paired

When the indicator light flashes blue once every 5 seconds, the device is paired with Bluetooth.

Koss-KSC35-Wireless-Bluetooth-Ear-Clip-Headphones-User-Guide-Image-4

 

Controls

Koss-KSC35-Wireless-Bluetooth-Ear-Clip-Headphones-User-Guide-Image-5

Ports

Koss-KSC35-Wireless-Bluetooth-Ear-Clip-Headphones-User-Guide-Image-8

Light Language

Koss-KSC35-Wireless-Bluetooth-Ear-Clip-Headphones-User-Guide-Image-6

Koss-KSC35-Wireless-Bluetooth-Ear-Clip-Headphones-User-Guide-Image-7

  • Blue (flashing)Paired
  • Blue & Red (flashing) Bluetooth Discovery Mode
  • Blue (solid) Charger Connected, Fully Charged
  • Red (solid) Charger Connected, Charging
  • Red (flashing) Low Battery

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning

  • Reorient or relocate the receiving antenna.
  •  Increase the separation between the equipment and receiver.
  • Consult the dealer or an experienced radio/TV technician for help

REFERENCE LINK

https://koss.com/

Leave a Reply