LG SAC36934111 Magic Remote Control User Manual
ACCESSORIES
The remote control mage shown may differ from the actual product. (Depend ng on country)
- Contents in this manual may be changed without PR or not due to upgrades to product functions.
BATTERY
Installing Batteries
- Please read this manual carefully.
- Press the top of the battery cover, slide back, and lift the cover as shown below.
- To replace batter es, open the battery cover, replace alkali ne batter es (1.5 V, AA) match ng+and-ends to the label ns de the compartment, and close the battery cover. Be sure to point the remote control at the remote control sensor on the TV.
- To remove the batteries, perform the installed on act ons and reverse. Don’t m x old or used batter es w the new ones. Close the cover securely.
- Open the battery cover to find the label.
Precautions
- After the replacement of the batteries, par the remote control and use it by the user manual.
- If the unit does not operate after the replacement of batteries, reattempt the party by the user manual.
- If the remote controller is not being used for a prolonged period, remove the batteries from the unit.
- Do not dismantle or expose the batteries to heat.
- Do not drop or exert extreme impact on the batteries. This may cause the case to be damaged.
- Do not immerse the batter in water.
- There’s a danger of explosion if the battery is inserted correctly.
- Properly dispose of used batteries.
- Fa lure to match the correct polar t es of the battery may cause the battery to burst or leak, result ng n f re, personal njury, or amb ent pollut.
REMOTE DESCRIPTION
- The remote control mage shown may differ from the actual product.
- The order of description may differ from the actual product.
- Some buttons and services may not be provided depending on models or regions.
Turns the TV on or off.
STB PWR
You can turn your set-top box on or off by adding the set-top box to the internal remote control for your TV.
Number buttons
Enters numbers.
(DASH)
inserts a
List
Accesses the saved channels or programs l st.
QUICK ACCESS
You can access apps or L ve TV using the number buttons corresponding to the features.
(Screen Remote)
D splays the Screen Remote.
- Accesses the Un versal Control Menu and some reg ons.
+Vol
Adjusts the volume level.
(MUTE)
- Mutes all sounds.
- Accesses the Accessibility menu
CH/P
Scrolls through the saved channels or programs.
(Voice recognition)*
(Voice recognition)*Once the vo ce d splay bar is activated on the TV screen, press and hold the button and speak your command out loud.
(HOME)
Accesses the Home menu.
STB Menu
D splays the set-top box Home menu. (When you are not watching ng v a set-top box: the d splay changes to the set-top box screen.)
Wheel (OK)
Press the center of theWheel (OK) button to select a menu. You can change channels or programs by using theWheel (OK) button.
(up/down/left/right)
Press the up, down, left, or right button to scroll the menu. If you pressbuttons when the po enter is n used, the po enter will appear on the screen, and the Mag c Remote will operate like a general remote control. To d splay the po enter on the screen aga and, shake the Mag c Remote to the left and right.
(INPUT)
Changes the input source. Displays a list of all the external in puts.
Streaming Service buttons
Connects to the V deo Stream ng Service.
(Q. Settings)
Accesses the Quick Settings.
Colored buttons
These access spec al functions ons n some menus. Red Button*: Runs the record function. (Depend ng on country)
Control buttons 
Controls med a contents
(TELETEXT buttons)
These buttons are used for teletext.
- To use the button, press and hold for more than 3 seconds
USING
How to register (pair) or deregister (unpair)
How to register (pair) the Magic Remote
To use the Mag c Remote, first pa r t w th your TV.
- Put batteries into the Mag c Remote and turn the TV on.
- Point the Mag c Remote at your TV and press the Wheel (OK) on the remote control.
- If the TV fails to register the Mag c Remote, try again after turning the TV off and back on.
How to use
- Shake the Mag c Remote slightly to the right and left or press (HOME), (INPUT), or (Q. Settings) buttons to make the po enter appear on the screen. (In some TV models, the power will appear when you turn the Wheel (OK) button.)
- If the pointer has not been used for a certain per od of time or Mag c Remote is placed on a flat surface, then the po enter will d appear.
- If the po enter does not respond ng smoothly, you can reset the pointer by moving it to the edge of the screen.
- The Mag c Remote depletes batteries faster than a normal remote due to the added tonal features.
PRECAUTIONS TO TAKE
- Use the remote control in the specified range (less than 10 m). You may experience communication problems when using the dev ce outs the coverage area or if there are obstacles in the coverage area.
- You may experience common cat on fa lures depending on the accessories. Dev ces such as a microwave oven and w wireless LAN operate in the same frequency band (2.4 GHz) as the Mag c Remote. This may cause common cat on fa lures.
- The Mag c Remote may not work properly for a wireless router (AP) s w th n 0.2 m of the TV. Your wireless router should be more than 0.2 m away from the TV.
- Do not disassemble or heat the batter es.
- Do not drop the battery. Avo d extreme shocks to the battery.
- nsert ng a battery n the wrong way may result in n explores on.
- Caut on: R sk of f re or explosion on f the battery s replaced by an incorrect type.
SPECIFICATIONS
| CATEGORIES | DETAILS |
| Model No. | AN-MR650A |
| Range of frequency | 2.400 GHz to 2.4835 GHz |
| Output Power (Max.) | 4 dBm |
| Channel | 40 channels |
| Reception sensitivity | -94.5 dBm |
| Dimensions (mm) | Width 48.3 x Length 183.5 x Thickness 33.7 (tolerance of ± 1 mm) |
| Weight | 101.7 g ± 8 g (excluding batteries) |
| Power source | AA 1.5 V, 2 alkaline batteries are used |
| Power consumption | 300 mW |
| Operational temperature range | 0 °C to 60 °C |
