LifeSmart LS-932 Smart Activity and Sleep Tracker User Guide

LifeSmart LS-932 Smart Activity and Sleep Tracker User Guide

General Instructions

1. Thank you for selecting LifeSmart Activity & Sleep Tracker LS-932.
2. This device is used for measuring steps walked, distance covered, consumed calories and monitoring sleep quality.
3. This device is Bluetooth 4.0 enabled. It is supported with the LifeSmart smartphone application. The data in the Activity & Sleep
4. Tracker is wirelessly uploaded to the smartphone application which supports Bluetooth 4.0.
5. The user can access the data anywhere and at anytime. Main Features:

• •  Support the Bluetooth 4.0 technology
  • OLED display
  •  Display steps walked, distance covered, the consumed calories and the current time
  • Track the quality of sleep
  • Alarm clock vibration reminder function(this function can be set on the app)

Device Components

Box Contents

1.  Activity & Sleep Tracker LS-932 (including Polymer Lithium Battery)
2. User Manual
3.  Wristband (large and small)
4.  Warranty Card

OLED Display

Initial Start-Up

How to Charge the Power

1. When the OLED displays the following symbol, it reminds you to charge the power or the battery is almost empty
2. Connect the USB interface with the computer to charge the device battery.
3. When the device is charging, the OLED will display as the following picture. The power symbol blinks.
4. The OLED displays as the following picture, it means the charging is complete.

Install the App and Pair-Up

• Download and install the LifeSmart app in your smartphone which supports Bluetooth 4.0 technology.
• Turn on Bluetooth and the App. Make sure both are ON when pair-up is proceeding.
• When the OLED is on, press and hold the button on the Activity &
• Sleep Tracker about 8 – 10 seconds to start pair-up.
• Symbol and symbol will be shown on the OLED alternatively, indicating pair-up is proceeding.

How to Wear the Activity & Sleep Tracker

1. For first wear, insert the wristband which has the USB icon into the USB interface of the Activity & Sleep Tracker.
2. Insert the wristband which has the button hole into the other interface of the Activity & Sleep Tracker.
3. Wear the Activity & Sleep Tracker just like wearing a watch. Remember the wristband which has USB icon on it must face to you.
4.  Press the wristband button into the wristband button hole to adjust the suitable wristband length.
5.  Then you can start your measurement.
6. Whether you wear it on your left or right arm, please make sure that the button is oriented to your arm and not to your hand.

How to Use

Follow the instructions in the manual to wear the Activity & Sleep Tracker. Then it can start the measurement.

The measuring data will be transmitted to your smartphone which supports Bluetooth 4.0 technology if you have paired up with it, with help of your free LifeSmart app.

How to View the Data

When the screen is off, and there is enough power, press the button on the activity tracker, the screen will display your activity achieved.

Note: all data are reinitialized to 0 at midnight but data are saved in the device during 7 days if they haven’t been synchronized with the app.

When the battery is almost empty, this first symbol will be displayed on the screen each time you activate the device with the button. The second symbol is displayed when the battery is completely empty and the device is not working anymore until you recharge it.

Tracking Sleep on Your Mobile Device

The Activity & Sleep Tracker can track the hours you sleep and your movement during sleep to help you understand your sleep quality. You can track your sleep using the app on your mobile device. To enter sleep mode, press and hold the button on the side of the Activity & Sleep Tracker. You will feel a vibration and a moon icon will flash on the display, indicating that sleep mode has begun.When you wake up, exit sleep mode by pressing and holding the button until it vibrates. The moon icon will disappear from the display.

Alarm Clock Reminder Function

The Activity & Sleep Tracker has the Alarm Clock Reminder Function. You can set the alarm clock through the app on your mobile device. Then press the button of the Activity & Sleep Tracker to finish the setting. When the setting time is coming, the Activity & Sleep Tracker vibrates, displays the current time, and the alarm clock icon blinks. The intensity of vibration will increase gradually. Press the button on the side of the Activity & Sleep Tracker to stop the
vibration in five minutes. Otherwise, it will stop vibration five minutes later automatically. At this moment, the Activity & Sleep Tracker will display the current time and the unblinking alarm clock icon.

Specifications

Maintenance

• When carrying out usual maintenance, please ensure practice of the following Do’s and Don’ts:
• DO use a dry soft cloth to wipe the dust.
• DO use a wet soft cloth, dipped into water and wrung out, to wipe the dirt. Then use a dry soft cloth to dry up the device.
• DON’T wash the device with water or immerse it in water.
• DON’T use propellant, abrasive or other chemicals to wipe the dirt in avoidance of discolor or malfunction.
• DON’T disassemble this device. If you have any problems, please contact LifeSmart. (Please refer to Warranty for contact information)
• Charge the power once for every 3 months, or at least once for half a year, if the device is not likely to be used for a long time.

Troubleshooting