LiftMaster 890MAX 3-Button Mini Remote Controls User Guide

LiftMaster 890MAX 3-Button Mini Remote Controls User Guide

Can be used as a replacement remote control for 80 Series, 970 Series, and 370 Series LiftMaster remote controls. Compatible with 315 MHz or 390 MHz garage door openers manufactured after January 1, 1993.  For use with gate operators, commercial door operators, or other products that are 315 MHz or 390 MHz and have a Learn button. Refer to your product manual for the location of the Learn button.

MODEL 895MAXMODEL 893MAXMODEL 890MAX

PREPARE

PROGRAMMING THE REMOTE CONTROL

1. Press and hold the program button the remote control until the LED on the front of the remote control turns on
2. Press and release the remote control button you wish to use the number of times that corresponds with the garage door opener type:
3. To exit programming mode, press any remote control button except the button that was just programmed
4. Press and release the Learn button on the garage door opener.
5. Press the remote control button 7 programmed in step 2 until the garage door opener lights flash or two clicks are heard.
6. To test, press the programmed button on the remote control.
7. Install the visor clip (not applicable for Model 890MAX).

HOW TO USE THE REMOTE CONTROL

The remote control will operate from up to 3 car lengths away on typical installations. Installations and conditions vary, contact an installing dealer for more information.

BATTERY

To replace battery, open the case as shown. Insert battery positive side up (+). Replace the battery with only 3V CR2032 or 3V CR2016 coin cell batteries (depending on the model). Dispose of old battery properly

Warning

To prevent possible SERIOUS INJURY or DEATH:

•  NEVER allow small children near batteries.

To reduce risk of fire, explosion or chemical burn:

• Replace ONLY with 3V CR2032 or 3V CR2016 coin batteries.
• DO NOT recharge, disassemble, heat above 212° F (100° C) or incinerate.

FAQS

1. What is the LiftMaster 890MAX 3-Button Mini Remote Control?
   The LiftMaster 890MAX is a compact and versatile remote control designed to operate garage doors, gates, and lighting systems. It is compatible with various LiftMaster garage door openers.
2. How many buttons does the LiftMaster 890MAX have, and what can they be used for?
   The LiftMaster 890MAX features three programmable buttons. Each button can be programmed to control different garage doors, gates, or lighting systems, providing convenient access and control.
3. Is the LiftMaster 890MAX compatible with my garage door opener?
   The LiftMaster 890MAX is designed to be compatible with a wide range of LiftMaster garage door openers. However, compatibility can vary, so it’s essential to check the manufacturer’s compatibility list or consult the user manual to ensure it works with your specific opener model.
4. How do I program the LiftMaster 890MAX remote control?
   Programming instructions can usually be found in the user manual that comes with the remote. Typically, the process involves pressing a specific combination of buttons on both the remote and the garage door opener itself. Refer to the manual for step-by-step instructions.
5. Is the LiftMaster 890MAX secure?
   LiftMaster remote controls, including the 890MAX, often come equipped with security features such as rolling code technology. This technology generates a new code each time the remote is used, making it difficult for unauthorized users to gain access.

ONE YEAR LIMITED WARRANTY

LiftMaster warrants to the first consumer purchaser of this product that it is free from defect in materials and/or workmanship for a period of 1 year from the date of purchase.

DOWNLOAD PDF

LiftMaster 890MAX 3-Button Mini Remote Controls User Guide

REFERENCE LINK

https://www.liftmaster.com/