InMotion MA01 5000mAh Wireless Power Bank User Instructions
- Wireless Charging Surface
- Power Check Button
- Lightning Input
- USB-C Input / Output
- LED Indicator
IMPORTANT SAFETY INSTRUCTIONS
- Do not place or store the product in any high temperature environment, including intense sunlight or heat. Do not place the product in a fire.
- Be cautious of any excessive drops, bumps, abrasions, or other impacts to the product.
- Do not disassemble the product. Do not attempt to repair or modify the product in any manner. Do not try to replace any parts of the product.
- Do not expose the product to moisture or submerge it in a liquid. Keep the product battery dry at all times.
- Do not attempt to charge the product using any other method except as described in this manual. Only use the included cable to charge the product
Power Bank Recharge
Insert the USB-C connector of the charging cable provided into the USB-C port of the power bank and insert the other end to a power supply with USB port-c or Insert a Lightning cable (not included) to the IP input port of the power bank and insert the other end to a power supply.
Wireless Charging
Other wireless charging supported device can also be charged wirelessly however they will not be attracted to each other. To have a better charging performance, please remove the case of your device before charging.
Battery Indicator
Press the power check button to check the remaining battery capacity.
4 lights on: indicating the remaining battery capacity is around 75-1000/o
3 lights on: indicating the remaining battery capacity is around 50-750/o
2 lights on: indicating the remaining battery capacity is around 25-500/o
1 light on: indicating the remaining battery capacity is around 1 0-250/o
1st light flashing: indicating the remaining battery capacity is under 1 09!o．Power bank needs recharging.
Technical Specification
- Capacity: 5000mAh
- Lightning Input: DC 5V / 2.1 A
- USB-C Input: DC 5V / 3A, DC 9V /2A, DC 12V / 1.5A
- Wireless Output: 5W, 7.5W, 1 OW, 15W Max.
- USB-C Output: DC 5V /3A, DC 9V / 2A, DC 1 2V /1.5A 1 BW Max.
- Size: 93. 7 x 63. 7 x 14.6mm (3. 7 x 2.5 x 0.6 in)[LxWxH]
- Weight: 116 g (4.1 oz)
- Cable length: 0.25m (1 0 in.)
FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
