Table of contents
show
Sony MDR-X10 X-Series Over-The-Ear Headphones User Guide
How to use
Before putting the headphones in the supplied carrying case, disconnect the cord. Otherwise the cord may break.
Precautions
High volume may affect your hearing. For traffic safety, do not use while driving or cycling.
- Because the headphones are of a high density enclosure, forcing them against your ears may result in eardrum damage. Avoid using the headphones where they are liable to be struck by people or other objects, such as a ball, etc. Pressing the headphones against your ears may produce a diaphragm click sound. This is not a
malfunction. - The supplied connecting cord is made especially for the headphones. Other connecting cords cannot be used with the headphones.
Plays/pauses a track of the connected iPod product with a single press. Skips to the next track with a double press. Skips to the previous track with a triple press. Starts the “Voice Over*” feature with a long press (if available). Press once to answer the call. Press again to end. Hold down for about two seconds to reject an incoming call. When you let go, two low beeps confirm the call was rejected.
Features
- Newly developed 50 mm driver unit for wide response, and naturally powerful bass. OFC voice coil allows for high input level (up to 3,000 mW).
- Newly developed Advanced Direct Vibe Structure Provides an acoustically tight seal for superior sound isolation and deep bass. Optimized diaphragm front chamber for more expansive and clear mid-range sound.
- Newly developed seamless earpad Elasticized leather covered urethane pads with seamless ear contact area for the ultimate in wearing comfort and superior sound isolation for deep bass.
- Soft head cushion provides long-term listening comfort.
- Multiple-folding design for optimum portability.
- Newly developed, tangle-free serrated cord Tiny serrations in the flat cord reduce tangling caused by friction.
Specifications
- Type: Closed, dynamic
- Driver unit: 50 mm, dome type (OFC Voice Coil) / Power handling
- capacity: 3,000 mW (IEC*)
- Impedance: 24 Ω at 1 kHz
- Sensitivity: 106 dB/mW / Frequency
- response: 3 Hz – 29,000 Hz
- Cord: 1.2 m (47 1 /4 in), Litz cord(inline remote and microphone cord for iPod/iPhone/iPad)
- Plug: Four conductor gold plated L-shaped stereo mini plug (inline remote and microphone cord for iPod/
iPhone/iPad) - Mass: Approx. 300 g (10.58 oz) without cord / Open circuit voltage level of the
- microphone: –42 dB (0 dB = 1 V/Pa)
From shoulders down with! Good riddance! The better!