Lectrofan-Micro-Sound-Machine-and-Audio-Device-featured

Lectrofan Micro Sound Machine and Audio Device Manual

Lectrofan-logo

Lectrofan Micro Sound Machine and Audio Device Manual

Lectrofan-Micro-Sound-Machine-and-Audio-Device-product

LOCATION OF PARTS AND CONTROLS

  1. Microphone
  2. Power/Play/Pause Button
  3. Volume +/Track Back Button
  4. Volume –/Track FWD Button
  5. LED Indicator
  6.  Micro USB Charging Port
  7. Micro USB Charging Cable (not shown)Lectrofan Micro Sound Machine and Audio Device fig1

LECTROFAN MICRO:

is are volutionary sound machine and wireless portable audio device combining the latest Bluetooth® speaker technology and the acclaimed sleep sound science of Adaptive Sound Technologies, Inc. You can mask noises, relax, and sleep better using 10 different sounds including four white noise selections, five fan sounds, or the ocean waves Sound Scape. The distinctive speaker design swivels up or down to easily fi t any where and be rotated for directional sound control. Simply turn the    top part of the Lectro Fan micro to adjust it as you like. All of this capability is controlled by three buttons, as shown in the images above.

Each button has two types of actions:

  1. The first action (Power On/Off ,Volume Up, or Volume Down) is activated by holding down the button for at least a couple of
    seconds—called a “Long Press.”
  2. The second action (Play/Pause, Previous Sound/Song, or Next Sound/Song) is activated by briefly pressing the button—called                 a “Short Press.”

USING YOUR LECTROFAN MICRO AS SOUND MASKING MACHINE

  1. When your Lectro Fan micro is off: A Short Press of the Power/Pause button will turn the Sound Masking feature On.
  2. When your Lectro Fan micro is on : A Short Press of the Power/Pause button will turn your Lectro Fan micro Off.

When choosing your Sound Story:

  1. Short Pressing the V+/<< button will select the Previous Sound Story.
  2. Short Pressing the V-/>> button will select the Next Sound Story.– Long Presses of either of the last two buttons will adjust the
    volume of the micro.* Note: to max volume on micro ,ensure your playback device is raised to max volume.

LECTROFAN MICRO
is are volutionary sound machine and wireless portable audio device combining the latest Bluetooth ® speaker technology and the acclaimed sleep sound science of Adaptive Sound Technologies, Inc. You can mask noises, relax, and sleep better using 10 different sounds including four white noise selections, five fan sounds, or the ocean waves Sound Scape. The distinctive speaker design swivels up or down to easily fi t any where and be rotated for directional sound control. Simply turn the top part of the Lectro Fan micro to adjust it as you like. All of this capability is controlled by three buttons, as shown in the images above.

Each button has two types of actions:

  1. The first action (Power On/O! ,Volume Up, or Volume Down) is activated by holding down the button for at least a couple of          seconds—called a “Long Press.”
  2. The second action (Play/Pause ,Previous Sound/Song, or Next Sound/Song) is activated by briefly pressing the button—called            a “Short Press.”

USING YOUR LECTROFAN MICRO AS A BLUETOOTH SPEAKER

Before you can use your Lectro Fan micro as a Bluetooth speaker, you need to pair it with your audio source ,such as your smart phone. This only needs to be done once for each audio source.

  1. First, turn on the Bluetooth feature of your Lectro Fan micro with a Long Press of the Power/Pause button .You will hear the tones indicating that the Bluetooth feature is turning on and the Blue status light will flash.
  2. Set your audio source to look for new Bluetooth devices and select the Lectro Fan micro device. If a PIN is required, use 0000. Two tones will indicate that the pairing is complete. See your audio source’s instructions for pairing, if needed. Once paired and connected, you can change the volume with a Long Press of the V+/<< or V-/>>keys to increase or decrease the volume. Pressing the Power/Pause button briefly will pause the audio and pressing it again will resume the audio. A Long Press of the Power/Pause button will turn your Lectro Fan micro O! , when in Bluetooth Speaker mode. When paired and connected to a smart phone, you can answer an incoming phone call with a Short Press of the Power/Pause button .Another Short Press of the Power/Pause button will end the call. During the phone call, the audio stream will be paused.

CHARGING LECTROFAN MICRO
The Lectro Fan micro includes a Lithium Ion rechargeable battery for hours of cord-free enjoyment, when a power source is not conveniently available. When near a power source, you can use your Lectro Fan micro indefinitely while plugged into a power adapter, etc. To charge the battery, plug the micro USB plug of the included power cable to the micro-USB jack on Lectro Fan micro and the USB-A end of the cable into a power source, such as a standard USB power adapter, a computer’s USB jack, etc. While charging, the Lectro Fan micro’s LED light will glow red and will turn o! after the battery is charged.

RESETTING LECTROFAN MICRO
During normal use, Lectro Fan micro should not need to be reset. If you wish to perform a hard reset, press the Power Button and hold it for 15 seconds. A tone will confirm that the system has been reset and a fan sound will begin to play.

BATTERY PERFORMANCE
Note: The Fan and White Noise sound can operate when battery power is lower, but the Bluetooth mode may require higher battery charge. Please ensure a strong battery charge to use Bluetooth capability.

SPECIFICATIONS

  • Power: USB-A power source able to supply 5 V at 1 Amp. (Not included)
  • Audio Output: 3 Watts or less
  • Bluetooth Compatibility: Bluetooth 2.0 or greater
  • Bluetooth Range: 33 feet (10 meters)
  • Lithium-Ion Battery Capacity:680 mAh

Battery Run Time:

  • Up to 6 hours for bluetooth audio
  • Up to 16 hours for white noise/fan sounds Battery Charge Time: 4 hours

LITHIUM-ION BATTERY
Lectro Fan micro contains a non-removable lithium-ion battery. Local, state or federal laws may prohibit disposal of lithium-ion batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options.

SOFTWARE LICENSING
The software contained in the Lectro Fan micro is licensed to you, not sold to you. This is only to protect our intellectual property and has no effect on your ability to use the Lectro Fan micro wherever you please. See http://asticorp.com/sw-license for more information.

ONE YEAR LIMITED WARRANTY
Adaptive Sound Technologies, Inc., here in after referred to as ASTI, warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1)YEAR from the date of purchase by the original purchaser (“Warranty Period”). If a defect arise sand a valid claim is received within the Warranty Period, at its option, ASTI will either 1) repair the        defect at no charge, using new or refurbished replacement parts, or 2) replace the product with a current product that is close              in functionality to the original product. A replacement product or part, including a user-installable part installed in accordance        with instructions  provided by ASTI, is covered by the remaining warranty of the original purchase. When a product or part is exchanged, the replacement item becomes your property and the replaced item becomes ASTI’s property.

Obtaining Service: To obtain warranty service please call, or email, your reseller. Please be prepared to describe the product that    needs service and the nature of the problem. All repairs and replacements must be authorized in advance by your reseller. A purchase receipt must accompany all returns. Service options, parts availability and response times will vary.

Limits and Exclusions: This Limited Warranty applies only to the Lectro Fan micro, and the included power cable. This warranty does not apply to: a) damage caused by failure to follow instructions relating to the product’s use or to the installation of components; b) damage caused by accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage caused by service performed by anyone who is  not a representative of ASTI; d) accessories used in conjunction with a covered product; e) a product or part that has been modified    to alter functionality or capability; f) any and all pre-existing conditions that occur prior to the effective date of this Limited Warranty relating to any product sold “as is” including, without limitation, floor demonstration models and refurbished items.

ASTI SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, ASTIDIS CLAIMS ANY AND ALL STATUTORY ORIMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION,WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF ASTI CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY.

Some geographic areas disallow the exclusion or limitation of incidental or consequential damages or the length of an implied warranty.
As a consequence, some of the above exclusions or limitations may not apply to buyers residing in those areas. This warranty grants specific legal rights to buyers, but other rights may also be granted, which vary from country to country, state to state, etc. FCC Declaration This equipment has been tested and found to comply with the limits for a Class B Digital particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o! and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Declaration of Conformity Trade Name: Lectro Fan micro
  • System Model Name: ASM1017
  • Responsible Party: Adaptive Sound Technologies, Inc.
  • Address: 1475 South Bascom Avenue Campbell, CA 95008 USA
  • Telephone Number: 1-408-377-3411

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

© 2016 Adaptive Sound Technologies, Inc. All Rights Reserved. LectroFan, Adaptive Sound  Technologies, and the ASTI logo are trademarks or registered trademarks of Adaptive Sound Technologies, Inc. All other marks, including Bluetooth ® , are registered trademarks of their respective owners.

Download Link

https://www.soundofsleep.com/wp-content/uploads/2016/12/LectroFan-Micro-UG.pdf

Leave a Reply